Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Composite Materials Based on Hemp and Flax for Low-Energy Buildings.

ABSTRACT: The article presents the results obtained in the course of a study on prospective application of flax/hemp wastes as a filling material of lime-based composites in the construction of low-energy buildings. The utilized filler comprised the hydrated lime with clay and Portland cement used as additives. The analysis involved evaluation of such properties as porosity, density, thermal conductivity, absorptivity, permeability, as well as compressive and flexural strength. Depending on the quantity of the filler, the properties of the composite changed. This, in turn, enabled to evaluate whether the utilized composite met the thermal requirements established for low-energy buildings. Afterwards, the obtained data were cross-referenced with the results gathered in the case of a room built of autoclaved aerated concrete. In order to prevent reaching the critical surface humidity, the internal surface temperature had to be calculated. Moreover, the chances of interstitial condensation occurring in the wall made of the analyzed lime-flax-hemp composite were determined as well. The study showed that the composite exhibits low strength, low density, low thermal conductivity, and high absorptivity. The external walls made of the lime-flax-hemp composite receive a limited exposure to condensation, but not significant enough to constitute any threat. The requirements established for low-energy buildings can be met by using the analyzed composite.

SUBMITTER: Brzyski P

PROVIDER: S-EPMC5459053 | biostudies-other | 2017 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

The Heat Conductivity Properties of Hemp-Lime Composite Material Used in Single-Family Buildings.

Project description:The main goal of the paper is to calculate the heat conductivity for three experimental hemp-lime composites used for structural construction purposes with the use of the experimental stand inside two compartments. Due to current construction trends, we are constantly searching for eco-friendly materials that have a low carbon footprint. This is the case of the analyzed material, and additional thermographic heat distribution inside the material during a fire resistance test proves that it is also a perfect insulation material, which could be applied in addition of popular isolating materials. This paper presents the results of certain hemp-lime composite studies and the potential for using hemp-lime composite for the structural construction industry. Hemp-lime composite heat transfer coefficient, fire resistance, and bulk density properties are compared to those of other commonly used construction materials. The obtained results show that the material together with supporting beams made of other biodegradable materials can be the perfect alternative for other commonly used construction materials.

| S-EPMC7079651 | biostudies-literature

Influence of Hybridizing Flax and Hemp-Agave Fibers with Glass Fiber as Reinforcement in a Polyurethane Composite.

Project description:In this study, six combinations of flax, hemp, and glass fiber were investigated for a hybrid reinforcement system in a polyurethane (PU) composite. The natural fibers were combined with glass fibers in a PU composite in order to achieve a better mechanical reinforcement in the composite material. The effect of fiber hybridization in PU composites was evaluated through physical and mechanical properties such as water absorption (WA), specific gravity (SG), coefficient of linear thermal expansion (CLTE), flexural and compression properties, and hardness. The mechanical properties of hybridized samples showed mixed trends compared to the unhybridized samples, but hybridization with glass fiber reduced water absorption by 37% and 43% for flax and hemp-agave PU composites respectively.

| S-EPMC5503059 | biostudies-other

Superinsulating BNNS/PVA Composite Aerogels with High Solar Reflectance for Energy-Efficient Buildings.

Project description:With the mandate of worldwide carbon neutralization, pursuing comfortable living environment while consuming less energy is an enticing and unavoidable choice. Novel composite aerogels with super thermal insulation and high sunlight reflection are developed for energy-efficient buildings. A solvent-assisted freeze-casting strategy is used to produce boron nitride nanosheet/polyvinyl alcohol (BNNS/PVA) composite aerogels with a tailored alignment channel structure. The effects of acetone and BNNS fillers on microstructures and multifunctional properties of aerogels are investigated. The acetone in the PVA suspension enlarges the cell walls to suppress the shrinkage, giving rise to a lower density and a higher porosity, accompanied with much diminished heat conduction throughout the whole product. The addition of BNNS fillers creates whiskers in place of disconnected transverse ligaments between adjacent cell walls, further ameliorating the thermal insulation transverse to the cell wall direction. The resultant BNNS/PVA aerogel delivers an ultralow thermal conductivity of 23.5 mW m-1 K-1 in the transverse direction. The superinsulating aerogel presents both an infrared stealthy capability and a high solar reflectance of 93.8% over the whole sunlight wavelength, far outperforming commercial expanded polystyrene foams with reflective coatings. The anisotropic BNNS/PVA composite aerogel presents great potential for application in energy-saving buildings.

| S-EPMC8811070 | biostudies-literature

CuSO4/[Cu(NH3)4]SO4-Composite Thermochemical Energy Storage Materials.

Project description:The thermochemical energy-storage material couple CuSO4/[Cu(NH3)4]SO4 combines full reversibility, application in a medium temperature interval (<350 °C), and fast liberation of stored heat. During reaction with ammonia, a large change in the sulfate solid-state structure occurs, resulting in a 2.6-fold expansion of the bulk material due to NH3 uptake. In order to limit this volume work, as well as enhance the thermal conductivity of the solid material, several composites of anhydrous CuSO4 with inorganic inert support materials were prepared and characterized with regard to their energy storage density, reversibility of the storage reaction, thermal conductivity, and particle morphology. The best thermochemical energy storage properties were obtained for a 10:1 CuSO4-sepiolite composite, combining an attractive energy storage density with slightly improved thermal conductivity and decreased bulk volume work compared to the pure salt.

| S-EPMC7763518 | biostudies-literature

Occupant-based energy upgrades selection for Canadian residential buildings based on field energy data and calibrated simulations.

Project description:Occupant behavior in residential buildings has a direct impact on the effectiveness of energy-saving measures. In order to realize a buildings' carbon mitigation targets, the impact of individual occupancy profiles needs to be integrated with building simulation models. This paper introduces a decision support framework as a potential solution to make energy performance upgrade choices based on different occupancy profiles. This framework has been demonstrated through a case study of two single-family detached homes in Canada, which were highly instrumented with sensors for monitoring energy input and output. The case studies represented two common occupancy profiles-(1) a family of four (consisting of 2 working adults and 2 teenagers); and (2) a retired couple. Firstly, calibrated energy models were developed by using one-year energy use data collected through an intrusive load monitoring technique. Secondly, energy upgrade combinations were considered for each profile and tested for additional investment, payback period and greenhouse gas (GHG) emissions. Lastly, the most suitable combination of energy upgrade for each profile was ranked using a multi-criteria decision-making method (e.g., TOPSIS). Results indicated that the retired couple used more energy than the family of four and required energy upgrades with usually higher payback periods to achieve the same level of GHG emission reduction. The results of this research are timely for energy policymaking and developing best management practices, which need to be implemented along with the deployment of more stringent building standards and codes.

| S-EPMC7295710 | biostudies-literature

An Advanced IoT-based System for Intelligent Energy Management in Buildings.

Project description:The energy sector is closely interconnected with the building sector and integrated Information and Communication Technologies (ICT) solutions for effective energy management supporting decision-making at building, district and city level are key fundamental elements for making a city Smart. The available systems are designed and intended exclusively for a predefined number of cases and systems without allowing for expansion and interoperability with other applications that is partially due to the lack of semantics. This paper presents an advanced Internet of Things (IoT) based system for intelligent energy management in buildings. A semantic framework is introduced aiming at the unified and standardised modelling of the entities that constitute the building environment. Suitable rules are formed, aiming at the intelligent energy management and the general modus operandi of Smart Building. In this context, an IoT-based system was implemented, which enhances the interactivity of the buildings' energy management systems. The results from its pilot application are presented and discussed. The proposed system extends existing approaches and integrates cross-domain data, such as the building's data (e.g., energy management systems), energy production, energy prices, weather data and end-users' behaviour, in order to produce daily and weekly action plans for the energy end-users with actionable personalised information.

| S-EPMC5856031 | biostudies-literature

Enhanced performance and interfacial investigation of mineral-based composite phase change materials for thermal energy storage.

Project description:A novel mineral-based composite phase change materials (PCMs) was prepared via vacuum impregnation method assisted with microwave-acid treatment of the graphite (G) and bentonite (B) mixture. Graphite and microwave-acid treated bentonite mixture (GBm) had more loading capacity and higher crystallinity of stearic acid (SA) in the SA/GBm composite. The SA/GBm composite showed an enhanced thermal storage capacity, latent heats for melting and freezing (84.64 and 84.14 J/g) was higher than those of SA/B sample (48.43 and 47.13 J/g, respectively). Addition of graphite was beneficial to the enhancement in thermal conductivity of the SA/GBm composite, which could reach 0.77 W/m K, 31% higher than SA/B and 196% than pure SA. Furthermore, atomic-level interfaces between SA and support surfaces were depicted, and the mechanism of enhanced thermal storage properties was in detail investigated.

| S-EPMC3664896 | biostudies-other

Biomass-Based Shape-Stabilized Composite Phase-Change Materials with High Solar-Thermal Conversion Efficiency for Thermal Energy Storage.

Project description:To alleviate the increasing energy crisis and achieve energy saving and consumption reduction in building materials, preparing shape-stabilized phase-change materials using bio-porous carbon materials from renewable organic waste to building envelope materials is an effective strategy. In this work, pine cone porous biomass carbon (PCC) was prepared via a chemical activation method using renewable biomaterial pine cone as a precursor and potassium hydroxide (KOH) as an activator. Polyethylene glycol (PEG) and octadecane (OD) were loaded into PCC using the vacuum impregnation method to prepare polyethylene glycol/pine cone porous biomass carbon (PEG/PCC) and octadecane/pine cone porous biomass carbon (OD/PCC) shape-stabilized phase-change materials. PCCs with a high specific surface area and pore volume were obtained by adjusting the calcination temperature and amount of KOH, which was shown as a caterpillar-like and block morphology. The shape-stabilized PEG/PCC and OD/PCC composites showed high phase-change enthalpies of 144.3 J/g and 162.3 J/g, and the solar-thermal energy conversion efficiencies of the PEG/PCC and OD/PCC reached 79.9% and 84.8%, respectively. The effects of the contents of PEG/PCC and OD/PCC on the temperature-controlling capability of rigid polyurethane foam composites were further investigated. The results showed that the temperature-regulating and temperature-controlling capabilities of the energy-storing rigid polyurethane foam composites were gradually enhanced with an increase in the phase-change material content, and there was a significant thermostatic plateau in energy absorption at 25 °C and energy release at 10 °C, which decreased the energy consumption.

| S-EPMC10534447 | biostudies-literature

Manufacturing Technology of Composite Materials-Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene.

Project description:The results of the investigations into the technological formation of new wear-resistant polymer composites based on polytetrafluoroethylene (PTFE) filled with disperse synthetic and natural compounds are presented. The efficiency of using PTFE composites reinforced with carbon fibers depends on many factors, which influence the significant improvement of physicomechanical characteristics. The results of this research allow stating that interfacial and surface phenomena of the polymer-solid interface and composition play a decisive role in PTFE composites properties. Fillers hinder the relative movement of the PTFE molecules past one another and, in this way, reduce creep or deformation of the parts, reducing the wear rate of parts used in dynamic applications as well as the coefficient of thermal expansion. The necessary structural parameters of such polymer composites are provided by regimes of process equipment.

| S-EPMC5506908 | biostudies-other

Form-Stable Composite Phase Change Materials Based on Porous Copper-Graphene Heterostructures for Solar Thermal Energy Conversion and Storage.

Project description:Solar-thermal energy conversion and storage technology has attracted great interest in the past few decades. Phase change materials (PCMs), by storing and releasing solar energy, are able to effectively address the imbalance between energy supply and demand, but they still have the disadvantage of low thermal conductivity and leakage problems. In this work, new form-stable solar thermal storage materials by impregnating paraffin PCMs within porous copper-graphene (G-Cu) heterostructures were designed, which integrated high thermal conductivity, high solar energy absorption, and anti-leakage properties. In this new structure, graphene can directly absorb and store solar energy in the paraffin PCMs by means of phase change heat transfer. The porous structure provided good heat conduction, and the large surface area increased the loading capacity of solar thermal storage materials. The small pores and superhydrophobic surfaces of the modified porous G-Cu heterostructures effectively hindered the leakage issues during the phase change process. The experimental results exhibited that the thermal conductivity of the prepared form-stable PCM composites was up to 2.99 W/(m·K), and no leakage took place in the solar-thermal charging process. At last, we demonstrated that the PCM composites as an energy source were easily integrated with a thermoelectric chip to generate electric energy by absorbing and converting solar energy.

| S-EPMC10748072 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data