Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Chemical and Morphological Characterization of Magnetron Sputtered at Different Bias Voltages Cr-Al-C Coatings.

ABSTRACT: MAX phases (M = transition metal, A = A-group element, and X = C/N) are of special interest because they possess a unique combination of the advantages of both metals and ceramics. Most attention is attracted to the ternary carbide Cr2AlC because of its excellent high-temperature oxidation, as well as hot corrosion resistance. Despite lots of publications, up to now the influence of bias voltage on the chemical bonding structure, surface morphology, and mechanical properties of the film is still not well understood. In the current study, Cr-Al-C films were deposited on silicon wafers (100) and Inconel 718 super alloy by dc magnetron sputtering with different substrate bias voltages and investigated using Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), Atomic Force Microscopy (AFM), and nanoindentation. Transmission Electron Microscopy (TEM) was used to analyze the correlation between the growth of the films and the coating microstructure. The XPS results confirm the presence of Cr2AlC MAX phase due to a negative shift of 0.6-0.9 eV of the Al2p to pure aluminum carbide peak. The XRD results reveal the presence of Cr2AlC MAX Phase and carbide phases, as well as intermetallic AlCr2. The film thickness decreases from 8.95 to 6.98 µm with increasing bias voltage. The coatings deposited at 90 V exhibit the lowest roughness (33 nm) and granular size (76 nm) combined with the highest hardness (15.9 GPa). The ratio of Al carbide to carbide-like carbon state changes from 0.12 to 0.22 and correlates with the mechanical properties of the coatings. TEM confirms the columnar structure, with a nanocrystalline substructure, of the films.

SUBMITTER: Obrosov A

PROVIDER: S-EPMC5459136 | biostudies-other | 2017 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Fabrication, Corrosion, and Mechanical Properties of Magnetron Sputtered Cu-Zr-Al Metallic Glass Thin Film.

Project description:The appearance of thin film metallic glasses (TFMGs) is gaining increasing interest because of their unique mechanical and anticorrosion properties and potential engineering applications. In this study, Cu-Zr-Al ternary thin film metallic glasses were fabricated by using DC magnetron sputtering equipment with various target powers. The evolution of the structure was systematically investigated by grazing incidence X-ray diffractometer, scanning electron microscopy, and transmission electron microscopy. The deposition rate increases with the increasing of applied target power. The as-deposited thin films show an amorphous structure. The compositional fluctuations on the nanometer scale indicate the presence of two Cu- and Zr-rich amorphous phases. The electrochemical corrosion measurements indicated that Cu-Zr-Al thin film metallic glasses had good corrosion resistance in the sulfuric acid solution. Nanoindentation results showed that the mechanical deformation was found to be homogenous and reproducible with a high value range for the hardness and modulus.

| S-EPMC6947152 | biostudies-literature

Self-passivating (Re,Al)B2 coatings synthesized by magnetron sputtering.

Project description:(Re0.67Al0.10)B2 and (Re0.74Al0.11)B2 solid solution as well as Re0.85B2 thin films were deposited by hybrid RF-DC magnetron sputtering. X-ray diffraction (XRD) showed that all films exhibit the ReB2 (P63/mmc) crystal structure. X-ray photoelectron spectroscopy (XPS) analyses performed on atmosphere exposed thin film surfaces suggest that ReB2 corrodes, consistent with literature, by forming perrhenic acid (HReO4) already after two days, while (Re0.74Al0.11)B2 forms a self-passivating Al-oxide layer preventing corrosion in a time period ? 60 days. Hence, it is evident that Al additions to ReB2 significantly increase the chemical stability during atmosphere exposure.

| S-EPMC6197250 | biostudies-literature

Improving the radiopacity of Fe-Mn biodegradable metals by magnetron-sputtered W-Fe-Mn-C coatings: Application for thinner stents.

Project description:In this exploratory work, micrometric radiopaque W-Fe-Mn-C coatings were produced by magnetron sputtering plasma deposition, for the first time, with the aim to make very thin Fe-Mn stents trackable by fluoroscopy. The power of Fe-13Mn-1.2C target was kept constant at 400 W while that of W target varied from 100 to 400 W producing three different coatings referred to as P100, P200, P400. The effect of the increased W power on coatings thickness, roughness, structure, corrosion behavior and radiopacity was investigated. The coatings showed a power-dependent thickness and W concentration, different roughness values while a similar and uniform columnar structure. An amorphous phase was detected for both P100 and P200 coatings while γ-Fe, bcc-W and W3C phases found for P400. Moreover, P200 and P400 showed a significantly higher corrosion rate (CR) compared to P100. The presence of W, W3C as well as the Fe amount variation determined two different micro-galvanic corrosion mechanisms significantly changing the CR of coatings, 0.26 ± 0.02, 59.68 ± 1.21 and 59.06 ± 1.16 μm/year for P100, P200 and P400, respectively. Sample P200 with its most uniform morphology, lowest roughness (RMS = 3.9 ± 0.4 nm) and good radiopacity (∼6%) appeared the most suitable radiopaque biodegradable coating investigated in this study.

| S-EPMC8777240 | biostudies-literature

Magnetron-sputtered Polytetrafluoroethylene-stabilized Silver Nanoisland Surface for Surface-Enhanced Fluorescence.

Project description:Surface-enhanced fluorescence (SEF) requires the absorption/emission band of the fluorophore, the localized surface plasmon resonance (LSPR) of the nanostructure and the excitation wavelength to fall in the same (or very close) spectral range. In this paper, we monitor the SEF intensity and lifetime dependence of riboflavin (vitamin B2) adsorbed on a spacer-modified Ag substrate with respect to the thickness of the spacer. The substrates were formed by silver nanoislands deposited onto magnetron-sputtered polytetrafluoroethylene (ms-PTFE). The spacer was formed by the ms-PTFE layer with the thickness ranging from ~5 to 25 nm. The riboflavin dissolved in dimethylsulfoxide (DMSO) at a 10 µM concentration forms, at the ms-PTFE surface, a homogeneous layer of adsorbed molecules corresponding to a monomolecular layer. The microspectroscopic measurements of the adsorbed layer were performed through a sessile droplet; our study has shown the advantages and limitations of this approach. Time-resolved fluorescence enabled us to determine the enhanced fluorescence quantum yield due to the shortening of the radiative decay in the vicinity of the plasmonic surface. For the 5 nm ms-PTFE layer possessing the largest (estimated 4×) fluorescence enhancement, the quantum yield was increased 2.3×.

| S-EPMC7221687 | biostudies-literature

UV-Enhanced Ethanol Sensing Properties of RF Magnetron-Sputtered ZnO Film.

Project description:ZnO film was deposited by the magnetron sputtering method. The thickness of ZnO film is approximately 2 μm. The influence of UV light illumination on C₂H₅OH sensing properties of ZnO film was investigated. Gas sensing results revealed that the UV-illuminated ZnO film displays excellent C₂H₅OH characteristics in terms of high sensitivity, excellent selectivity, rapid response/recovery, and low detection limit down to 0.1 ppm. The excellent sensing performance of the sensor with UV activation could be attributed to the photocatalytic oxidation of ethanol on the surface of the ZnO film, the planar film structure with high utilizing efficiency of UV light, high electron mobility, and a good surface/volume ratio of of ZnO film with a relatively rough and porous surface.

| S-EPMC5795609 | biostudies-literature

Inert gas bubble formation in magnetron sputtered thin-film CdTe solar cells.

Project description:Cadmium telluride (CdTe) solar cells are deposited in current production using evaporation-based tech- niques. Fabricating CdTe solar cells using magnetron sputtering would have the advantage of being more cost-efficient. Here, we show that such deposition results in the incorporation of the magnetron working gas Ar, within the films. Post deposition processing with CdCl2 improves cell efficiency and during which stacking faults are removed. The Ar then accumulates into clusters leading to the creation of voids and blisters on the surface. Using molecular dynamics, the penetration threshold energies are determined for both Ar and Xe, with CdTe in both zinc-blende and wurtzite phases. These calculations show that more Ar than Xe can penetrate into the growing film with most penetration across the (111) surface. The mechanisms and energy barriers for interstitial Ar and Xe diffusion in zinc-blende are determined. Barriers are reduced near existing clusters, increasing the probability of capture-based cluster growth. Barriers in wurtzite are higher with non-Arrhenius behaviour observed. This provides an explanation for the increase in the size of voids observed after stacking fault removal. Blister exfoliation was also modelled, showing the formation of shallow craters with a raised rim.

| S-EPMC7426057 | biostudies-literature

Characterization and Validation of a-Si Magnetron-Sputtered Thin Films as Solid He Targets with High Stability for Nuclear Reactions.

Project description:In this work, we present our magnetron sputtering based methodology to produce amorphous silicon coatings with closed porosity, as a strategy to fabricate solid helium targets, in the form of supported or self-supported thin films, for nuclear reactions. We show how by changing the He working pressure it is possible to obtain highly porous homogeneous structures incorporating different He amounts. These porous coatings (a-Si:He) are very reproducible from run to run, and the high He amount incorporated makes them excellent candidates for solid He targets. The possibility of producing self-supported films is illustrated here, and its potential use in inverse kinematics experiments with radioactive beams is shown through the dispersion in forward geometry of a stable 6Li beam. Also the elastic scattering cross-sections for proton from helium were determined using an a-Si:He coating. The results agree well with the ones reported in the literature. These two examples validate our coatings as good candidates to be used as solid He targets in nuclear reactions. The stability of He inside the coatings, fundamental for its use as solid He targets, was investigated, both over time and after irradiation. The coatings proved to be very stable, and the amount of He inside the pores remains unaltered at least 2 years after deposition and after high irradiation fluence (5 × 1017 particles/cm2; with a dose rate of 5 × 1012 particles/(cm2 s)).

| S-EPMC6640798 | biostudies-literature

Structural and morphological data of RF-Sputtered BiVO4 thin films.

Project description:Structural and morphological modulation of rf-sputtered BiVO4 thin films deposited using mechanochemical synthesis prepared BiVO4 nano-powders as sintered target are included in this data article. The crystalline nature of as-prepared films, namely amorphous and crystalline was acquired with time and temperature dependent in-situ high temperature X-ray diffraction (HT-XRD), at a time interval of 1?h. Typical Fourier transform infrared (FT-IR) spectra of annealed thin film of monoclinic BiVO4 structure is given. Furthermore, correlation between morphologies of various substrate temperature fabricated BiVO4 thin films are presented.

| S-EPMC5988375 | biostudies-literature

Nanoindentation dataset of silicon and hafnia doped silicon coatings produced by magnetron sputtering.

Project description:Mechanical properties of three different coatings comprising of pure silicon, 36 mol% HfO2-doped silicon and 60 mol% HfO2-doped silicon on SiC substrate material were obtained by nanoindentation. The coatings aim at oxidation protective layers in environmental barrier coating systems for SiC/SiC ceramic matrix composites (CMC). The examined coatings were produced by physical vapour deposition (magnetron sputtering) and have been tested under cycling conditions between room temperature and 1523?K until 100?h accumulated hot time. In order to measure the hardness and the reduced Young's modulus, a Berkovich tip has been used with a constant depth modulus of 100?nm and 160?nm. Two depth moduli have been chosen to investigate a possible volume impact on the mechanical properties. Six successfully produced indents have been averaged to examine the hardness and reduced Young's modulus. The testing has been done on polished cross sections thereby minimising the impact of the substrate material on the measured values. This article provides data related to "Hafnia-doped Silicon Bond Coats manufactured by PVD for SiC/SiC CMCs".

| S-EPMC7306585 | biostudies-literature

Facile and Green Engineering Approach for Enhanced Corrosion Resistance of Ni-Cr-Al2O3 Thermal Spray Coatings.

Project description:Thermal spray coatings (TSCs) are widely utilized for limiting degradation of structural components. However, the performance of TSCs is significantly impaired by its inherent non-homogeneous microstructure, comprising of splat boundaries, porosities, secondary phase-formation, and elemental segregation. Herein, we report a simplistic approach for significantly enhancing the corrosion resistance of TSCs. Ni-Cr-5Al2O3 coatings were deposited on stainless steel using high-velocity oxy-fuel technique. The microstructure of as-sprayed coating showed significant inhomogeneities in the form of isolated splats and elemental segregation. The microstructure of developed coatings was modified using a novel processing technique, known as stationary friction processing (SFP). The SFP treatment resulted in complete refinement of coating microstructure with elimination of splat boundaries and pores along with elemental homogenization. The corrosion behavior of as-sprayed and SFP treated coating was evaluated in 3.5% NaCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy. The SFP treatment reduced the corrosion rate of as-sprayed coating by an order of magnitude. Long-time immersion studies showed continuously decreasing impedance of the as-sprayed coating due to the penetration of the electrolyte along the splat boundaries. In contrast, impedance for the SFP treated coating increased with the immersion time due to the removal of all microstructural defects.

| S-EPMC7528329 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data