Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Review on Microwave-Matter Interaction Fundamentals and Efficient Microwave-Associated Heating Strategies.

ABSTRACT: Microwave heating is rapidly emerging as an effective and efficient tool in various technological and scientific fields. A comprehensive understanding of the fundamentals of microwave-matter interactions is the precondition for better utilization of microwave technology. However, microwave heating is usually only known as dielectric heating, and the contribution of the magnetic field component of microwaves is often ignored, which, in fact, contributes greatly to microwave heating of some aqueous electrolyte solutions, magnetic dielectric materials and certain conductive powder materials, etc. This paper focuses on this point and presents a careful review of microwave heating mechanisms in a comprehensive manner. Moreover, in addition to the acknowledged conventional microwave heating mechanisms, the special interaction mechanisms between microwave and metal-based materials are attracting increasing interest for a variety of metallurgical, plasma and discharge applications, and therefore are reviewed particularly regarding the aspects of the reflection, heating and discharge effects. Finally, several distinct strategies to improve microwave energy utilization efficiencies are proposed and discussed with the aim of tackling the energy-efficiency-related issues arising from the application of microwave heating. This work can present a strategic guideline for the developed understanding and utilization of the microwave heating technology.

SUBMITTER: Sun J

PROVIDER: S-EPMC5502878 | biostudies-other | 2016 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Efficient Nucleophilic Degradation of an Organophosphorus Pesticide "Diazinon" Mediated by Green Solvents and Microwave Heating.

Project description:An efficient strategy for the degradation of organophosphate pesticide Diazinon was investigated. In this work, ionic liquids, bio-based solvents, and two conventional organic solvents were used as reaction media. Kinetics studies by means of half-life (t1/2,h) were followed by 31P NMR and the products analyzed by GC-MS, HPLC-MS and NMR techniques. These results have shown that t1/2 values in ionic liquids were the lowest and also they were able to activate two electrophilic centers in Diazinon, whilst degradation in bio-based solvents occurred slowly by only an aromatic pathway. In addition, a study to estimate the influence of green activation techniques was carried out by using Ultrasound irradiation and Microwave heating in combination with greener solvents and two conventional organic solvents. Under Microwave heating, faster degradation than under ultrasound irradiation was found. Finally, considering both families of solvent used here and their behavior under green activation techniques, we propose that the more efficient way for degradation of Diazinon with piperidine is by microwave heating using ionic liquids as solvents.

| S-EPMC6340133 | biostudies-literature

Controlled Microwave Heating Accelerates Rolling Circle Amplification.

Project description:Rolling circle amplification (RCA) generates single-stranded DNAs or RNA, and the diverse applications of this isothermal technique range from the sensitive detection of nucleic acids to analysis of single nucleotide polymorphisms. Microwave chemistry is widely applied to increase reaction rate as well as product yield and purity. The objectives of the present research were to apply microwave heating to RCA and indicate factors that contribute to the microwave selective heating effect. The microwave reaction temperature was strictly controlled using a microwave applicator optimized for enzymatic-scale reactions. Here, we showed that microwave-assisted RCA reactions catalyzed by either of the four thermostable DNA polymerases were accelerated over 4-folds compared with conventional RCA. Furthermore, the temperatures of the individual buffer components were specifically influenced by microwave heating. We concluded that microwave heating accelerated isothermal RCA of DNA because of the differential heating mechanisms of microwaves on the temperatures of reaction components, although the overall reaction temperatures were the same.

| S-EPMC4562646 | biostudies-literature

Temperature Assessment Of Microwave-Enhanced Heating Processes.

Project description:In this study, real-time and in-situ permittivity measurements under intense microwave electromagnetic fields are proposed as a powerful technique for the study of microwave-enhanced thermal processes in materials. In order to draw reliable conclusions about the temperatures at which transformations occur, we address how to accurately measure the bulk temperature of the samples under microwave irradiation. A new temperature calibration method merging data from four independent techniques is developed to obtain the bulk temperature as a function of the surface temperature in thermal processes under microwave conditions. Additionally, other analysis techniques such as Differential Thermal Analysis (DTA) or Raman spectroscopy are correlated to dielectric permittivity measurements and the temperatures of thermal transitions observed using each technique are compared. Our findings reveal that the combination of all these procedures could help prove the existence of specific non-thermal microwave effects in a scientifically meaningful way.

| S-EPMC6658534 | biostudies-literature

Infant formula fatty acid profile following microwave heating.

Project description:Microwave heating of foods may alter their content. Yet, parents commonly heat infant formula in the microwave oven. The study aimed at understanding whether microwave heating of formula changes its fatty acid (FA) composition. Portions of infant formula were prepared and divided in three parts: control (sampled twice: at the start and after 30 minutes), microwave (sampled twice: after reaching 37°C and 50°C), and water bath (sampled twice: after reaching 37°C and 50°C). In thus obtained samples, a total profile of 25 FA was assessed using gas chromatography-mass spectrometry. Overall, fourteen portions were prepared, which were sampled 84 times yielding 2075 individual total FA level measurements. Few differences were identified between the microwave, control, and water bath groups. Microwave warming to 37°C was associated with increases of C12 (median increased by +0.40%, p = 0.0063), C14 (+0.05%, p = 0.0091), and C4 content (+6.90%, p = 0.0131). Microwaving up to 50°C slightly decreased C16:1trans (-5.00%, p = 0.0463) and C18:2trans1 (-5.13%, p = 0.0231). A paired comparison of pooled control and microwaved samples revealed increases in C12 (+0.18%, p = 0.0490) as well as a loss of C18:2trans1 (also -5.13%, p = 0.0073) and C18:2trans3 (-5.56%, p = 0.0042) after microwave treatment. C18:2trans1 (-2.63%, p = 0.0132) and C18:3trans1 (-2.26%, p = 0.0434) were lower in microwaved samples compared with the water bath. A slightly lower C18:2 content was found in the water bath samples than in the control groups (-0.11%, p = 0.0430). None of these differences would remain significant after a correction for multiple comparisons. Microwave heating of infant formula to 37°C or 50°C might marginally alter its total FA profile. Further studies are required to determine whether it alters the rate of free radical formation.

| S-EPMC7454968 | biostudies-literature

Discussion on Microwave-Matter Interaction Mechanisms by In Situ Observation of "Core-Shell" Microstructure during Microwave Sintering.

Project description:This research aims to deepen the understanding of the interaction mechanisms between microwave and matter in a metal-ceramic system based on in situ synchrotron radiation computed tomography. A special internal "core-shell" microstructure was discovered for the first time and used as an indicator for the interaction mechanisms between microwave and matter. Firstly, it was proved that the microwave magnetic field acted on metal particles by way of inducing an eddy current in the surface of the metal particles, which led to the formation of a "core-shell" microstructure in the metal particles. On this basis, it was proposed that the ceramic particles could change the microwave field and open a way for the microwave, thereby leading to selective heating in the region around the ceramic particles, which was verified by the fact that all the "core-shell" microstructure was located around ceramic particles. Furthermore, it was indicated that the ceramic particles would gather the microwaves, and might lead to local heating in the metal-ceramic contact region. The focusing of the microwave was proved by the quantitative analysis of the evolution rate of the "core-shell" microstructure in a different region. This study will help to reveal the microwave-matter interaction mechanisms during microwave sintering.

| S-EPMC5456654 | biostudies-other

The physicochemical properties of chitosan prepared by microwave heating.

Project description:The aim of this study was to compare the physicochemical properties of chitosan prepared by microwave and water bath heating with an equivalent quantity of heat intake. The structure and physicochemical properties of the chitosan obtained by these two methods were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), gel permeation chromatography (GPC), and scanning electron microscopy (SEM). The FTIR and XRD patterns show that there was no significant difference in the structure of chitosan produced by the two heat sources. The results showed that chitosan with 73.86% deacetylation was successfully prepared by microwave heating within 60 min, while a longer time of 180 min was required for the preparation of chitosan with the same deacetylation degree (74.47%) using the conventional heating method under the same heating rate. Even under the same temperature conditions, microwave technology can greatly reduce the reaction time by approximately 1/3, while the chitosan produced by microwaves can obtain relatively low molecular weight and viscosity. These results showed that microwaves may efficiently promote complete chemical reactions by the friction heating mechanism generated by molecular vibration beyond a rapid heating source, turning into a more efficient, energy-saving, and environmentally friendly method for the further use of rigid shrimp shells and highly crystalline crustacean materials.

| S-EPMC7174223 | biostudies-literature

Unusual microwave heating of water in reverse micellar solution.

Project description:Microwaves (MWs) are widely used for heating food, accelerating chemical reactions, drying materials, therapies, and so on. Water molecules absorb MWs and produce heat because of their substantial electric dipole moments. Recently, increasing attention has been paid to accelerating various catalytic reactions in water-containing porous materials using MW irradiation. Here, a critical question is whether water in nanoscale pores generates heat in the same way as liquid water. Is it valid that MW-heating behaviors of nanoconfined water are estimated solely by a dielectric constant of liquid water? There are almost no studies regarding this question. Here, we address it using reverse micellar (RM) solutions. Reverse micelles are water-containing nanoscale cages formed by self-assembled surfactant molecules in oil. We measured real-time temperature changes of liquid samples within a waveguide under MW irradiation at 2.45 GHz and at MW intensities of ~ 3 to ~ 12 W/cm2. We found that the heat production and its rate per unit volume of water in the RM solution are about one order of magnitude larger than those of liquid water at all the MW intensities examined. This indicates that water spots that are much hotter than liquid water under MW irradiation at the same intensity, are formed in the RM solution. Our findings will give fundamental information to develop effective and energy-saving chemical reactions in nanoscale reactors with water under MW irradiation, and to study MW effects on various aqueous mediums with nanoconfined water. Furthermore, the RM solution will serve as a platform to study the impact of nanoconfined water on MW-assisted reactions.

| S-EPMC10050161 | biostudies-literature

Influence of Wave-Absorbing Materials on the Heating Efficiency in Microwave Heating Treatment of Contaminated Soil.

Project description:China has a lot of wastelands that are usually overly contaminated as a result of the relocation of industrial enterprises. Given that long-term threats are thus generated, safe and effective treatment routines are urgently needed. Due to its low carbon footprint and environmental protection benefits, the microwave heating treatment of contaminated soil has generated substantial academic interest. Nevertheless, wave-absorbing materials must be added during the treatment process to holistically enhance the effectiveness of heating the contaminated soil. Therefore, this study selects three typical wave-absorbing materials, i.e., Fe3O4, SiC and activated carbon, to explore the influence of the addition of wave-absorbing materials on the microwave heating efficiency for contaminated soil. Moreover, the changes in the mineral phases and microscopic morphology of the contaminated soil and wave-absorbing materials after heating at different temperatures are analyzed. It is concluded that the heating rate would reach 39.5 °C/min when the amount of additive Fe3O4 reaches 8%; when the temperature exceeds 300 °C, the Fe3O4 will be gradually oxidized to Fe2O3. Activated carbon is a wave-absorbing material that has a higher thermal stability than Fe3O4, although it has less impact on the heating rate. The ability of SiC to absorb waves has a limited impact on the heating rate. During microwave heating, the microscopic morphology of the contaminated soil and wave-absorbing materials do not change significantly.

| S-EPMC10744507 | biostudies-literature

Microwave Heating-Assisted Catalytic Dry Reforming of Methane to Syngas.

Project description:Natural gas is a robust and environmentally friendlier alternative to oil resources for energy and chemicals production. However, gas is distributed globally within shales and hydrates, which are generally remote and difficult reserves to produce. The accessibility, transportation, and distribution, therefore, bring major capital costs. With today's low and foreseen low price of natural gas, conversion of natural gas to higher value-added chemicals is highly sought by industry. Dry reforming of methane (DRM) is a technology pathway to convert two critical greenhouse gas components, CH4 and CO2, to syngas, a commodity chemical feedstock. To date, the challenges of carbon deposition on the catalyst and evolution of secondary gas-phase products have prevented the commercial application of the DRM process. The recent exponential growth of renewable electricity resources, wind and solar power, provides a major opportunity to activate reactions by harnessing low-cost carbon-free energy via microwave-heating. This study takes advantage of differences in dielectric properties of materials to enable selective heating by microwave to create a large thermal gradient between a catalyst surface and the gas phase. Consequently, the reaction kinetics at the higher temperature catalyst surface are promoted while the reactions of lower temperature secondary gas-phase are reduced.

| S-EPMC5997706 | biostudies-literature

Efficient Cu-catalyzed base-free C-S coupling under conventional and microwave heating. A simple access to S-heterocycles and sulfides.

Project description:S-aryl thioacetates can be prepared by reaction of inexpensive potassium thioacetate with both electron-rich and electron-poor aryl iodides under a base-free copper/ligand catalytic system. CuI as copper source affords S-aryl thioacetates in good to excellent yields, by using 1,10-phenanthroline as a ligand in toluene at 100 °C after 24 h. Under microwave irradiation the time was drastically reduced to 2 h. Both procedures are simple and involve a low-cost catalytic system. This methodology was also applied to the "one-pot" synthesis of target heterocycles, such as 3H-benzo[c][1,2]dithiol-3-one and 2-methylbenzothiazole, alkyl aryl sulfides, diaryl disulfides and asymmetric diaryl sulfides in good yields.

| S-EPMC3596051 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data