Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tunable Luminescence in Sr2MgSi2O7:Tb3+, Eu3+Phosphors Based on Energy Transfer.

ABSTRACT: A series of Tb3+, Eu3+-doped Sr2MgSi2O7 (SMSO) phosphors were synthesized by high temperature solid-state reaction. X-ray diffraction (XRD) patterns, Rietveld refinement, photoluminescence spectra (PL), and luminescence decay curves were utilized to characterize each sample's properties. Intense green emission due to Tb3+ 5D4→7F5 transition was observed in the Tb3+ single-doped SMSO sample, and the corresponding concentration quenching mechanism was demonstrated to be a diople-diople interaction. A wide overlap between Tb3+ emission and Eu3+ excitationspectraresults in energy transfer from Tb3+ to Eu3+. This has been demonstrated by the emission spectra and decay curves of Tb3+ in SMSO:Tb3+, Eu3+ phosphors. Energy transfer mechanism was determined to be a quadrupole-quadrupole interaction. And critical distance of energy transfer from Tb3+ to Eu3+ ions is calculated to be 6.7 Å on the basis of concentration quenching method. Moreover, white light emission was generated via adjusting concentration ratio of Tb3+ and Eu3+ in SMSO:Tb3+, Eu3+ phosphors. All the results indicate that SMSO:Tb3+, Eu3+ is a promising single-component white light emitting phosphor.

SUBMITTER: Li M

PROVIDER: S-EPMC5503325 | biostudies-other | 2017 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

TemperatureDependent Luminescence of RedEmitting Ba2Y5B5O17: Eu3+ Phosphors with Efficiencies Close to Unity for NearUV LEDs.

Project description:Solid state white light sources based on a nearUV LED chip are gaining more and more attention. This is due to the increasing efficiency of nearUVemitting LED chips and wider phosphors selection if compared to devices based on blue LED chips. Here, a brief overview is given of the concepts of generating white light employing nearUV LED and some optical properties of the available phosphors are discussed. Finally, the synthesis and optical properties of very efficient redemitting Ba2Y5B5O17:Eu3+ phosphor powder and ceramics is reported and discussed in terms of possible application as a red component in nearUV LEDbased white light sources.

| S-EPMC7040723 | biostudies-literature

Multiple Energy Transfer in Luminescence-Tunable Single-Phased Phosphor NaGdTiO4: Tm3+, Dy3+, Sm3.

Project description:Advances in solid-state white-light-emitting diodes (WLEDs) necessitate the urgent development of highly efficient single-phase phosphors with tunable photoluminescence properties. Herein, the Tm3+, Dy3+, and Sm3+ ions are incorporated into the orthorhombic NaGdTiO4 (NGT) phosphors, resulting in phosphors that fulfill the aforementioned requirement. The emission spectrum of Tm3+ ions overlaps well with the adsorption spectra of both Dy3+ and Sm3+ ions. Under the excitation at 358 nm, the single-phase NaGdTiO4: Tm3+, Dy3+, Sm3+ phosphor exhibits tunable emission peaks in the blue, yellow, and red regions simultaneously, resulting in an intense white-light emission. The coexisting energy transfer behaviors from Tm3+ to Dy3+ and Sm3+ ions and the energy transfer from Dy3+ to Sm3+ ions are demonstrated to be responsible for this phenomenon. The phosphors with multiple energy transfers enable the development of single-phase white-light-emitting phosphors for phosphor-converted WLEDs.

| S-EPMC7407989 | biostudies-literature

Tunable Circularly Polarized Luminescence via Chirality Induction and Energy Transfer from Organic Films to Semiconductor Nanocrystals.

Project description:Circularly polarized luminescent (CPL) films with high dissymmetry factors hold great potential for optoelectronic applications. Herein, we propose a strategy for achieving strongly dissymetric CPL in nanocomposite films based on chirality induction and energy transfer to semiconductor nanocrystals. First, focusing on a purely organic system, aggregation-induced emission (AIE) and CPL activity of organic liquid crystals (LCs) forming helical nanofilaments was detected, featuring green emission with high dissymmetry factors glum ∼ 10-2. The handedness of helical filaments, and thus the sign of CPL, was controlled via minute amounts of a small chiral organic dopant. Second, nanocomposite films were fabricated by incorporating InP/ZnS semiconductor quantum dots (QDs) into the LC matrix, which induced the chiral assembly of QDs and endowed them with chiroptical properties. Due to the spectral matching of the components, energy transfer (ET) from LC to QDs was possible enabling a convenient way of tuning CPL wavelengths by varying the LC/QD ratio. As obtained, composite films exhibited absolute glum values up to ∼10-2 and thermally on/off switchable luminescence. Overall, we demonstrate the induction of chiroptical properties by the assembly of nonchiral building QDs on the chiral organic template and energy transfer from organic films to QDs, representing a simple and versatile approach to tune the CPL activity of organic materials.

| S-EPMC9706675 | biostudies-literature

Tunable two-color luminescence and host-guest energy transfer of fluorescent chromophores encapsulated in metal-organic frameworks.

Project description:Co-assembly of chromophore guests with host matrices can afford materials which have photofunctionalities different from those of individual components. Compared with clay and zeolite materials, the use of metal-organic frameworks (MOFs) as a host structure for fabricating luminescent host-guest materials is still at an early stage. Herein, we report the incorporation of a laser dye, 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM), into stilbene-based and naphthalene-based MOF systems. The resulting materials exhibit blue/red two-color emission, and the intensity ratio of blue to red fluorescence varies in different planes within the MOF crystal as detected by 3D confocal fluorescence microscopy. The observed changes in ratiometric fluorescence suggest the occurrence of energy transfer from MOF host to DCM molecules, which can be further confirmed by periodic density functional theoretical (DFT) calculations. Moreover, selective changes in luminescence behavior are observed on treating the guest@MOF samples with volatile organic compounds (methanol, acetone and toluene), indicating that these host-guest systems have potential applications as fluorescence sensors. It can be expected that by rational selection of MOF hosts and guest chromophores with suitable emissive colors and energy levels, a wide variety of multi-color luminescent and energy-transfer systems can readily be prepared in a similar manner.

| S-EPMC3949246 | biostudies-literature

Solar-blind ultraviolet-C persistent luminescence phosphors.

Project description:Visible-light and infrared-light persistent phosphors are extensively studied and are being used as self-sustained glowing tags in darkness. In contrast, persistent phosphors for higher-energy, solar-blind ultraviolet-C wavelengths (200-280?nm) are lacking. Also, persistent tags working in bright environments are not available. Here we report five types of Pr3+-doped silicates (melilite, cyclosilicate, silicate garnet, oxyorthosilicate, and orthosilicate) ultraviolet-C persistent phosphors that can act as self-sustained glowing tags in bright environments. These ultraviolet-C persistent phosphors can be effectively charged by a standard 254?nm lamp and emit intense, long-lasting afterglow at 265-270?nm, which can be clearly monitored and imaged by a corona camera in daylight and room light. Besides thermal-stimulation, in bright environments, photo-stimulation also contributes to the afterglow emission and its contribution can be dominant when ambient light is strong. This study expands persistent luminescence research to the ultraviolet-C wavelengths and brings persistent luminescence applications to light.

| S-EPMC7184723 | biostudies-literature

Luminescence and luminescence quenching of highly efficient Y2Mo4O15:Eu(3+) phosphors and ceramics.

Project description:A good LED phosphor must possess strong enough absorption, high quantum yields, colour purity, and quenching temperatures. Our synthesized Y2Mo4O15:Eu(3+) phosphors possess all of these properties. Excitation of these materials with near-UV or blue radiation yields bright red emission and the colour coordinates are relatively stable upon temperature increase. Furthermore, samples doped with 50% Eu(3+) showed quantum yields up to 85%, what is suitable for commercial application. Temperature dependent emission spectra revealed that heavily Eu(3+) doped phosphors possess stable emission up to 400?K and lose half of the efficiency only at 515?K. In addition, ceramic disks of Y2Mo4O15:75%Eu(3+) phosphor with thickness of 0.71 and 0.98?mm were prepared and it turned out that they efficiently convert radiation of 375 and 400?nm LEDs to the red light, whereas combination with 455?nm LED yields purple colour.

| S-EPMC4867634 | biostudies-literature

Bright luminescence from pure DNA-curcumin-based phosphors for bio hybrid light-emitting diodes.

Project description:Recently, significant advances have occurred in the development of phosphors for bio hybrid light-emitting diodes (Bio-HLEDs), which have created brighter, metal-free, rare-earth phosphor-free, eco-friendly, and cost-competitive features for visible light emission. Here, we demonstrate an original approach using bioinspired phosphors in Bio-HLEDs based on natural deoxyribonucleic acid (DNA)-curcumin complexes with cetyltrimethylammonium (CTMA) in bio-crystalline form. The curcumin chromophore was bound to the DNA double helix structure as observed using field emission tunnelling electron microscopy (FE-TEM). Efficient luminescence occurred due to tightly bound curcumin chromophore to DNA duplex. Bio-HLED shows low luminous drop rate of 0.0551?s(-1). Moreover, the solid bio-crystals confined the activating bright luminescence with a quantum yield of 62%, thereby overcoming aggregation-induced quenching effect. The results of this study herald the development of commercially viable large-scale hybrid light applications that are environmentally benign.

| S-EPMC5004171 | biostudies-literature

Enhanced Dy3+ white emission via energy transfer in spherical (Lu,Gd)3Al5O12 garnet phosphors.

Project description:The Dy3+ doped (Lu,Gd)3Al5O12 garnet phosphors with spherical morphology were obtained via homogeneous precipitation method, followed by calcination at 1100?°C. The particle morphology does not change significantly, but can be controlled by adjusting the urea content. The synthesis, structure, luminescent properties of precursor and resultant particles were analyzed by the combined technologies of XRD, FE-SEM, PLE/PL decay behavior. The (Lu0.975Dy0.025)AG phosphors display strong blue and yellow emission at ~481?nm (4F9/2???6H15/2 transition of Dy3+) and ~582?nm 4F9/2???6H13/2 transition of Dy3+), respectively. The phosphors have similar color coordinate and temperature of (~0.33, ~0.34), ~5517?K, respectively, which are closed to the white emission. The particle size and luminescent intensity decreased while the lifetime increased with the urea concentration increasing. The Gd3+ addition does not alter the shape/position of emission peaks, but enhance the blue and yellow emission of Dy3+ owing to the efficient Gd3+???Dy3+ energy transfer. The [(Lu1-xGdx)0.975Dy0.025]3Al5O12 phosphors are expected to be widely used in the lighting and display areas.

| S-EPMC7010698 | biostudies-literature

Luminescence properties and energy transfer of K3LuF6:Tb3+,Eu3+ multicolor phosphors with a cryolite structure.

Project description:In recent years, compounds with a cryolite structure have become excellent hosts for luminescent materials. In this paper, Tb3+ doped and Tb3+/Eu3+ co-doped K3LuF6 phosphors were prepared via a high temperature solid phase sintering method. The XRD, SEM, as well as photoluminescence excitation (PLE) and emission (PL) spectra were measured to investigate the structure and luminescence properties of the as-prepared samples. In the Tb3+/Eu3+ co-doped K3LuF6 samples, both characteristic emission spectra of Tb3+ and Eu3+ could be observed and the emission color of the K3LuF6:0.12Tb3+,xEu3+ phosphors could be adjusted from green to yellowish pink and the corresponding CIE values could be regulated from (0.2781, 0.5407) in the green area to (0.4331, 0.3556) in the yellowish pink area by controlling the concentration ratio of Eu3+/Tb3+. In addition, the energy transfer mechanism in Tb3+/Eu3+ co-doped K3LuF6 was calculated to be a quadrupole-quadrupole interaction from Tb3+ to Eu3+ based on the Dexter's equation.

| S-EPMC9060547 | biostudies-literature

Probing Polytopic Membrane Protein-Substrate Interactions by Luminescence Resonance Energy Transfer.

Project description:Integral membrane proteins play essential roles in all living systems; however, major technical hurdles challenge analyses of this class of proteins. Biophysical approaches that provide structural information to complement and leverage experimentally determined and computationally predicted structures are urgently needed. Herein we present the application of luminescence resonance energy transfer (LRET) for investigating the interactions of the polytopic membrane-bound oligosaccharyl transferases (OTases) with partner substrates. Monomeric OTases, such as the PglBs from Campylobacter jejuni and Campylobacter lari, catalyze transfer of glycans from membrane-associated undecaprenol diphosphate-linked substrates to proteins in the bacterial periplasm. LRET-based distance measurements are enabled by the inclusion of an encoded N-terminal lanthanide-binding tag (LBT), and LRET between the luminescent (LBT)-Tb(3+) donor complex and fluorescently labeled peptide and glycan substrates provides discrete distance measurements across the span of the membrane. LRET-based measurements of detergent-solubilized PglB from C. lari allowed direct comparison with the distances based on the previously reported the C. lari PglB crystal structure, thereby validating the approach in a defined system. Distance measurements between peptide and glycan substrates and the C. jejuni PglB offer new experimental information on substrate binding to the related, but structurally uncharacterized, eukaryotic OTase.

| S-EPMC5480290 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data