Crack Mitigation in Concrete: Superabsorbent Polymers as Key to Success?
Ontology highlight
ABSTRACT:
SUBMITTER: Mignon A
PROVIDER: S-EPMC5503349 | biostudies-other | 2017 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The damage in reinforced concrete (RC) structures can be induced either by the dynamic or static load. The inspection technologies available today have difficulty in detecting slowly progressive, locally limited damage, especially in hard-to-reach areas in the superstructure. The four-point bending test on the benchmark RC structure was used as a test of the quality and sensitivity of the embedded sensors. It allowed assessment of whether any cracking and propagation that occurs with the embedded sensors can be detected. Various methods are used for the analysis of the ultrasonic signals. By determining the feature from the ultrasonic signals, the changes in the whole structure are evaluated. The structural degradation of the RC benchmark structure was tested using various non-destructive testing methods to obtain a comprehensive decision about structural condition. It is shown that the ultrasonic sensors can detect a crack with a probability of detection of 100%, also before it is visible by the naked eye and other techniques, even if the damage is not in the direct path of the ultrasonic wave. The obtained results confirmed that early crack detection is possible using the developed methodology based on embedded and external sensors and advanced signal processing.
| S-EPMC6767232 | biostudies-literature
Project description:In this paper, we study the strain transfer mechanism between a host material and an optical fiber. A new analytical model handling imperfect bonding between layers is proposed. A general expression of the crack-induced strain transfer from fractured concrete material to optical fiber is established in the case of a multilayer system. This new strain transfer model is examined through performing wedge splitting tests on concrete specimens instrumented with embedded and surface-mounted fiber optic cables. The experimental results showed the validity of the crack-induced strain expression fitted to the distributed strains measured using an Optical Backscattering Reflectometry (OBR) system. As a result, precise estimations of the crack openings next to the optical cable location were achieved, as well as the monitoring of the optical cable response through following the strain lag parameter.
| S-EPMC7218875 | biostudies-literature
Project description:This paper proposes a customized convolutional neural network for crack detection in concrete structures. The proposed method is compared to four existing deep learning methods based on training data size, data heterogeneity, network complexity, and the number of epochs. The performance of the proposed convolutional neural network (CNN) model is evaluated and compared to pretrained networks, i.e., the VGG-16, VGG-19, ResNet-50, and Inception V3 models, on eight datasets of different sizes, created from two public datasets. For each model, the evaluation considered computational time, crack localization results, and classification measures, e.g., accuracy, precision, recall, and F1-score. Experimental results demonstrated that training data size and heterogeneity among data samples significantly affect model performance. All models demonstrated promising performance on a limited number of diverse training data; however, increasing the training data size and reducing diversity reduced generalization performance, and led to overfitting. The proposed customized CNN and VGG-16 models outperformed the other methods in terms of classification, localization, and computational time on a small amount of data, and the results indicate that these two models demonstrate superior crack detection and localization for concrete structures.
| S-EPMC7957757 | biostudies-literature
Project description:To investigate the durability of reinforced concrete (RC) beams under the combined actions of transverse cracks and corrosion, corrosion tests were conducted on a total of eight RC beams with different water-cement ratios and cracking states. The effects of the transverse crack width, water-cement ratio, and the length of the wetting-drying cycle on the distribution of the free chloride concentration, the cross-sectional loss of the tensile steel bars, and the chloride diffusion coefficient are analyzed. The results show that the widths of the transverse crack and the water-cement ratio of concrete greatly affected the chloride profile and content of the RC beam specimens. Specifically, the chloride contents in all the cracked RC beams at the depth of the steel bar exceeded the threshold value of 0.15%. As the width of the cracks increased, the chloride concentration and penetration of the cracked concrete beam increased. However, the chloride concentration at the reinforcement position did not seem to be obviously affected by increasing the wetting-drying cycles from 182 days to 364 days. Moreover, the decrease of the water-cement ratio effectively inhibited the penetration of chloride ions in the RC beam specimens. In terms of the cross-sectional loss of the steel bars, the average loss of the steel bar increases with increasing crack width for the beams with 182-day cycles, while the effect of crack width on the average loss is not as noticeable for the beams with 364-day cycles. Finally, a model is proposed to predict the relationship between the crack width influence coefficient, ?, and the crack width, w, and this model shows good agreement with the experimental results.
| S-EPMC7503623 | biostudies-literature
Project description:Monitoring the instantaneous and changing concrete surface condition is paramount to cost-effectively managing tunnel assets. In practice, detecting cracks efficiently and accurately is a very challenging task due to concrete blebs, stains, and illumination over the concrete surface. Unclear and tiny cracks cannot be detected effectively. In this paper, we proposed an ultra-efficient crack detection algorithm (CrackHHP) and an improved pre-extraction and second percolation process based on the percolation model to address these issues. Our contributions are shown as follows: 1) apply the overlapping grids and weight-based, redefined pixel value to obtain the candidate dark pixel image while preserving the cracks. 2) introduce the second percolation processing to generate a high-accuracy crack detection algorithm, which can connect the tiny fractures and detect the tiny cracks. 3) construct a high-efficiency and high-accuracy crack detection algorithm combining the improved pre-extraction and the second percolation process. The experimental results demonstrate that CrackHHP can significantly improve the efficiency and accuracy of crack detection.
| S-EPMC6062087 | biostudies-literature
Project description:In order to enhance the mitigation of crack occurrence and propagation within basement concrete structures, this research endeavors to propose an optimization methodology grounded in the Mask Region-based Convolutional Neural Network (Mask-RCNN) and an analysis of temperature effects. Initially, the Mask-RCNN algorithm is employed to perform image segmentation of the basement concrete structure, facilitating the precise identification of crack locations and shapes within the structure. Subsequently, the finite element analysis method is harnessed to simulate the structural stress and deformation in response to temperature variations. An optimization algorithm is introduced to adjust geometric parameters and material properties using insights from the temperature effect analysis. This algorithm aims to minimize stress concentration and deformation within the structure, thus diminishing the incidence and proliferation of cracks. In order to assess the efficacy of the optimization approach, an authentic basement concrete structure is selected for scrutiny, and the structure is monitored in real-time through the installation of strain gauges and monitoring equipment. These instruments track structural stress and deformation under diverse temperature conditions, and the evolution of cracks is meticulously documented. The outcomes demonstrate that by adjusting the structural geometric parameters and material properties, the crack density experiences a notable reduction of 60.22%. Moreover, the average crack length and width witness reductions of 40.24% and 35.43%, respectively, thereby corroborating the efficacy of the optimization method. Furthermore, an assessment of stress concentration and deformation within the structure is conducted. Through the optimization process, the maximum stress concentration in the structure diminishes by 25.22%, while the maximum deformation is curtailed by 30.32%. These results signify a substantial enhancement in structural stability. It is evident that the optimization algorithm exhibits robustness and stability in the context of crack control, consistently delivering favorable outcomes across diverse parameter configurations.
| S-EPMC10553232 | biostudies-literature
Project description:SDNET2018 is an annotated image dataset for training, validation, and benchmarking of artificial intelligence based crack detection algorithms for concrete. SDNET2018 contains over 56,000 images of cracked and non-cracked concrete bridge decks, walls, and pavements. The dataset includes cracks as narrow as 0.06?mm and as wide as 25?mm. The dataset also includes images with a variety of obstructions, including shadows, surface roughness, scaling, edges, holes, and background debris. SDNET2018 will be useful for the continued development of concrete crack detection algorithms based on deep convolutional neural networks (DCNNs), which are a subject of continued research in the field of structural health monitoring. The authors present benchmark results for crack detection using SDNET2018 and a crack detection algorithm based on the AlexNet DCNN architecture. SDNET2018 is freely available at https://doi.org/10.15142/T3TD19.
| S-EPMC6247444 | biostudies-literature
Project description:Millions of birds die in bird-window collisions in the United States each year. In specialized test settings, researchers have developed methods to alter window designs to mitigate collisions. However, few published studies provide pretest and posttest evaluations of mitigation treatment areas and untreated control areas on existing buildings. We initially monitored bird-window collisions at a single building on the University of Utah campus in Salt Lake City, Utah, USA, during winter 1 (November 9, 2017-January 2, 2018). We found 15 bird-window collisions, most under a portion of the building with a mirrored façade. To test a mitigation treatment, we installed Feather Friendly® bird deterrent film on part of the mirrored façade after winter 1. The unmitigated areas of the same building served as a control area. We continued monitoring during the following winter 2 (November 15, 2018-January 12, 2019). The treated area collisions declined from seven before mitigation to two after mitigation, a 71% reduction. The control area had eight collisions at both times. Results of a generalized estimating equation yielded a significant area by season interaction effect (p = 0.03) and fewer collisions in the mitigated area than the control area at winter 2 (p = 0.03), supporting efficacy of the mitigation. In winter 2 we also expanded monitoring to eight total buildings to evaluate the risks of mirrored windows and proximity to fruiting pear trees (Prunus calleryana) and the benefits of bird-friendly glass. Bird-friendly glass, found on two buildings, included windows with permanent fritted dots or embedded ultraviolet patterns. We counted 22 collisions across the eight buildings. Mirrored windows and proximity to fruiting pear trees related to higher odds of bird-window collisions, based on separate generalized estimating equations. The best fit model included mirrored windows and pear trees. The two buildings with bird-friendly glass had only one collision, suggesting that these designs deter collisions, although the difference was not statistically significant. To publicize the study and to receive reports of additional bird collisions or fatalities on campus, we created a citizen science project on iNaturalist and engaged in additional outreach efforts that yielded 22 ad hoc reports. Many previous studies have documented Cedar Waxwing (Bombycilla cedrorum) collisions, but at relatively low numbers. Cedar Waxwings accounted for 31 of 34 identifiable collisions from the monitoring study and 4 of 21 identifiable collisions or fatalities from ad hoc reports.
| S-EPMC6727830 | biostudies-literature
Project description:In this article, a system for the detection of cracks in concrete tunnel surfaces, based on image sensors, is presented. Both data acquisition and processing are covered. Linear cameras and proper lighting are used for data acquisition. The required resolution of the camera sensors and the number of cameras is discussed in terms of the crack size and the tunnel type. Data processing is done by applying a new method called Gabor filter invariant to rotation, allowing the detection of cracks in any direction. The parameter values of this filter are set by using a modified genetic algorithm based on the Differential Evolution optimization method. The detection of the pixels belonging to cracks is obtained to a balanced accuracy of 95.27%, thus improving the results of previous approaches.
| S-EPMC5539543 | biostudies-other