Near Infrared Investigation of Polypropylene-Clay Nanocomposites for Further Quality Control Purposes-Opportunities and Limitations.
Ontology highlight
ABSTRACT:
SUBMITTER: Witschnigg A
PROVIDER: S-EPMC5512652 | biostudies-other | 2015 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Near-infrared (NIR) fluorescence has attracted much attention in biomedical fields because it offers deep tissue penetration and high spatial resolution. Herein, a method is developed for the preparation of NIR fluorescent nanocomposites (NCs) by encapsulating natural chlorophyll (Chl) into the micelles of octylamine-modified poly(acrylic acid) (OPA). Both femtosecond transient absorption spectra and isothermal titration calorimetry thermogram reveal that the micelles of OPA provide a hydrophobic environment for the improved fluorescence efficiency. Hence the resulted Chl NCs possess unique properties such as ultrasmall size, outstanding photostability, good biocompatibility, and superbright NIR fluorescence emission. In vivo imaging of sentinel lymph node is achieved in nude mice, demonstrating the potential of Chl NCs in biomedical applications. This work provides a new strategy for the preparation of highly biocompatible NIR fluorescence labeling nanocomposites.
| S-EPMC7315411 | biostudies-literature
Project description:Quartz is the most abundant mineral on the earth's surface. It is spectrally active in the longwave infrared (LWIR) region with no significant spectral features in the optical domain, i.e., visible-near-infrared-shortwave-infrared (Vis-NIR-SWIR) region. Several space agencies are planning to mount optical image spectrometers in space, with one of their missions being to map raw materials. However, these sensors are active across the optical region, making the spectral identification of quartz mineral problematic. This study demonstrates that indirect relationships between the optical and LWIR regions (where quartz is spectrally dominant) can be used to assess quartz content spectrally using solely the optical region. To achieve this, we made use of the legacy Israeli soil spectral library, which characterizes arid and semiarid soils through comprehensive chemical and mineral analyses along with spectral measurements across the Vis-NIR-SWIR region (reflectance) and LWIR region (emissivity). Recently, a Soil Quartz Clay Mineral Index (SQCMI) was developed using mineral-related emissivity features to determine the content of quartz, relative to clay minerals, in the soil. The SQCMI was highly and significantly correlated with the Vis-NIR-SWIR spectral region (R2 = 0.82, root mean square error (RMSE) = 0.01, ratio of performance to deviation (RPD) = 2.34), whereas direct estimation of the quartz content using a gradient-boosting algorithm against the Vis-NIR-SWIR region provided poor results (R2 = 0.45, RMSE = 15.63, RPD = 1.32). Moreover, estimation of the SQCMI value was even more accurate when only the 2000-2450 nm spectral range (atmospheric window) was used (R2 = 0.9, RMSE = 0.005, RPD = 1.95). These results suggest that reflectance data across the 2000-2450 nm spectral region can be used to estimate quartz content, relative to clay minerals in the soil satisfactorily using hyperspectral remote sensing means.
| S-EPMC8255506 | biostudies-literature
Project description:We describe the preparation of nanocomposites which exhibit dichroism in the near infrared region (NIR). These materials consist of crosslinked poly(dimethylsiloxane) (PDMS) and gold nanoparticles, coated with 1-dodecanethiol or tert-tetradecanethiol. The alkanethiols improve dispersibility of the gold particles, and accordingly composites were manufactured by diffusion of the particles into swollen self-supporting PDMS elastomer films. After drying, the films were exposed to solvents for one minute, stretched in wet state, dried again and annealed. This procedure led to formation of oriented linear gold particle assemblies within stretched polymer. If the aspect ratio of the particle assemblies is high, the absorption of polarized light in the NIR region is expected to depend on the angle between the polarization plane and the orientation direction of the particle assemblies, and this was observed to be the case.
| S-EPMC5453250 | biostudies-other
Project description:The deterioration of the physical-mechanical properties and loss of the chemical safety of plastics after consumption are topics of concern for food packaging applications. Incorporating nanoclays is an alternative to improve the performance of recycled plastics. However, properties and overall migration from polymer/clay nanocomposites to food require to be evaluated case-by-case. This work aimed to investigate the effect of organic modifier types of clays on the structural, thermal and mechanical properties and the overall migration of nanocomposites based on 50/50 virgin and recycled post-consumer polypropylene blend (VPP/RPP) and organoclays for food packaging applications. The clay with the most hydrophobic organic modifier caused higher thermal stability of the nanocomposites and greater intercalation of polypropylene between clay mineral layers but increased the overall migration to a fatty food simulant. This migration value was higher from the 50/50 VPP/RPP film than from VPP. Nonetheless, clays reduced the migration and even more when the clay had greater hydrophilicity because of lower interactions between the nanocomposite and the fatty simulant. Conversely, nanocomposites and VPP/RPP control films exhibited low migration values in the acid and non-acid food simulants. Regarding tensile parameters, elongation at break values of PP film significantly increased with RPP addition, but the incorporation of organoclays reduced its ductility to values closer to the VPP.
| S-EPMC8125780 | biostudies-literature
Project description:Recent developments in compact near infrared (NIR) instruments, including both handheld and process instruments, have enabled easy and affordable deployment of multiple instruments for various field and online or inline applications. However, historically, instrument-to-instrument variations could prohibit success when applying calibration models developed on one instrument to additional instruments. Despite the usefulness of calibration transfer techniques, they are difficult to apply when a large number of instruments and/or a large number of classes are involved. Direct model transferability was investigated in this study using miniature near-infrared (MicroNIR™) spectrometers for both classification and quantification problems. For polymer classification, high cross-unit prediction success rates were achieved with both conventional chemometric algorithms and machine learning algorithms. For active pharmaceutical ingredient quantification, low cross-unit prediction errors were achieved with the most commonly used partial least squares (PLS) regression method. This direct model transferability is enabled by the robust design of the MicroNIR™ hardware and will make deployment of multiple spectrometers for various applications more manageable.
| S-EPMC6571657 | biostudies-literature
Project description:Near-infrared (NIR) persistent phosphor ZnGa2O4:Cr3+ (ZGC) has unique deep-tissue rechargeable afterglow properties. However, the current synthesis leads to agglomerated products with irregular morphologies and wide size distributions. Herein, we report on in vivo rechargeable mesoporous SiO2/ZnGa2O4:Cr3+ (mZGC) afterglow NIR-emitting nanocomposites that are made by a simple, one-step mesoporous template method. At less than 600 °C, pores in mesoporous silica nanoparticles (MSNs) act as nanoreactors to generate in situ ZnGa2O4:Cr3+ NIR-persistent phosphors. The as-synthesized mZGC preserves defined size, morphology, and mesoporous nanostructure of the MSNs. The persistent luminescence of the as-synthesized mZGC is recharged in a simulated deep-tissue environment (e.g., ≈8 mm pork slab) in vitro by using red light (620 nm). Moreover, mZGC can be repeatedly activated in vivo for persistent luminescence imaging in a live mouse model by using white LED as a light source. Our concept of utilizing mesoporous silica as nanoreactor to fabricate ZGC PL nanoparticles with controllable morphology and preserved porous nanostructure paves a new way to the development and the wide application of deep tissue rechargeable ZGC in photonics and biophotonics.
| S-EPMC4941782 | biostudies-literature
Project description:Mild photothermal therapy (PTT), as a new anticancer therapeutic strategy, faces big challenges of limited therapeutic accuracy and side-effects due to uneven heat distribution. Here, near infrared triggered nitric oxide (NO) release nanocomposites based on bismuth sulfide (Bi2S3) nanoparticles and bis-N-nitroso compounds (BNN) are constructed for NO-enhanced mild photothermal therapy. Upon 808 nm irradiation, the high photothermal conversion efficiency and on-demand NO release are realized simultaneously. Due to the unique properties of NO, enhanced antitumor efficacy of mild PTT based on BNN-Bi2S3 nanocomposites is achieved in vitro and in vivo. Mechanism studies reveal that the exogenous NO from BNN-Bi2S3 could not only impair the autophagic self-repairing ability of tumor cells in situ, but also diffuse to the surrounding cells to enhance the therapeutic effect. This work points out a strategy to overcome the difficulties in mild PTT, and has potentials for further exploitation of NO-sensitized synergistic cancer therapy.
| S-EPMC6364593 | biostudies-literature
Project description:Far infrared radiation in the range of 4-20 µm has been showed to have biological and health benefits to the human body. Therefore, incorporating far-infrared emissivity additives into polymers and/or fabrics hold promise for the development of functional textiles. In this study, we incorporated nine types of natural minerals into polypropylene (PP) film and examined their properties to identify potential candidates for functional textiles and apparels. The addition of 2% mineral powders into PP film increased the far-infrared emissivity (5-14 µm) by 7.65%-14.48%. The improvement in far-infrared emissivity within the range of 5-14 µm, which overlaps with the peak range of human skin radiation at 8-14 µm, results in increased absorption efficiency, and have the potential to enhance thermal and biological effects. Moreover, the incorporation of mineral powders in PP films exhibited favorable ultraviolet (UV) protection and near-infrared (NIR) shielding properties. Two films, specifically those containing red ochre and hematite, demonstrated excellent UV protection with a UPF rating of 50+ and blocked 99.92% and 98.73% of UV radiation, respectively. Additionally, they showed 95.2% and 93.2% NIR shielding properties, compared to 54.1% NIR shielding properties of PP blank films. The UV protection and NIR shielding properties offered additional advantages for the utilization of polymer composite with additives in the development of sportswear and other outdoor garments. The incorporation of minerals could absorb near-IR radiation and re-emit them at longer wavelength in the mid-IR region. Furthermore, the incorporation of minerals significantly improved the heat retention of PP films under same heat radiation treatment. Notably, films with red ochre and hematite exhibited a dramatic temperature increase, reaching 2.5 and 3.2 times the temperature increase of PP films under same heat radiation treatment, respectively (46.8 °C and 59.9 °C higher than the temperature increase of 20.9 °C in the PP film). Films with additives also demonstrated lower thermal effusivity than PP blank films, indicating superior heat insulation properties. Therefore, polypropylene films with mineral additives, particularly those containing red ochre and hematite, showed remarkable heat capacity, UV-protection, NIR-shielding properties and enhanced far infrared emissivity, making them promising candidates for the development of functional textiles.
| S-EPMC10724279 | biostudies-literature
Project description:The development of biocompatible nanomaterials that interface with human skin and tissue is critical for advancing prosthetics and other therapeutic medical needs. In this perspective, the development of nanoparticles with cytotoxicity and antibiofilm properties and biocompatibility characteristics are important. Metallic silver (Ag) exhibits good biocompatibility, but it is often challenging to integrate it into a nanocomposite without compromising its antibiofilm properties for optimal applications. In this study, new polymer nanocomposites (PNCs) with ultra-low filling content (0.0023-0.046 wt%) of Ag nanoplates were manufactured and tested. The cytotoxicity and antibiofilm activity of different composites with polypropylene (PP) matrix were examined. At first, PNCs surface were analyzed by means of AFM (atomic force microscopy) with phase contrast evaluation and FTIR (Fourier-transform infrared spectroscopy) to study the Ag nanoplates distribution. Subsequently, the cytotoxicity and growth properties of biofilms were assessed by MTT assay protocol and detection of nitric oxide radicals. Antibacterial and antibiofilm activities were measured against Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (K. pneumoniae). The PNCs with silver exhibited antibiofilm activity although they did not inhibit regular planktonic bacterial growth. Moreover, the PNCs were not cytotoxic to mammalian cells and did not induce significant immune response. These features reveal the potential of the PNCs developed in this study for usage in fabrication of prosthetics and other smart structures for biomedical applications.
| S-EPMC10215392 | biostudies-literature
Project description:The interaction of water with polymers is an intensively studied topic. Vibrational spectroscopy techniques, mid-infrared (MIR) and Raman, were often used to investigate the properties of water-polymer systems. On the other hand, relatively little attention has been given to the potential of using near-infrared (NIR) spectroscopy (12,500-4000 cm-1; 800-2500 nm) for exploring this problem. NIR spectroscopy delivers exclusive opportunities for the investigation of molecular structure and interactions. This technique derives information from overtones and combination bands, which provide unique insights into molecular interactions. It is also very well suited for the investigation of aqueous systems, as both the bands of water and the polymer can be reliably acquired in a range of concentrations in a more straightforward manner than it is possible with MIR spectroscopy. In this study, we applied NIR spectroscopy to investigate interactions of water with polymers of varying hydrophobicity: polytetrafluoroethylene (PTFE), polypropylene (PP), polystyrene (PS), polyvinylchloride (PVC), polyoxymethylene (POM), polyamide 6 (PA), lignin (Lig), chitin (Chi) and cellulose (Cell). Polymer-water mixtures in the concentration range of water between 1-10%(w/w) were investigated. Spectra analysis and interpretation were performed with the use of difference spectroscopy, Principal Component Analysis (PCA), Median Linkage Clustering (MLC), Partial Least Squares Regression (PLSR), Multivariate Curve Resolution Alternating Least Squares (MCR-ALS) and Two-Dimensional Correlation Spectroscopy (2D-COS). Additionally, from the obtained data, aquagrams were constructed and interpreted with aid of the conclusions drawn from the conventional approaches. We deepened insights into the problem of water bands obscuring compound-specific signals in the NIR spectrum, which is often a limiting factor in analytical applications. The study unveiled clearly visible trends in NIR spectra associated with the chemical nature of the polymer and its increasing hydrophilicity. We demonstrated that changes in the NIR spectrum of water are manifested even in the case of interaction with highly hydrophobic polymers (e.g., PTFE). Furthermore, the unveiled spectral patterns of water in the presence of different polymers were found to be dissimilar between the two major water bands in NIR spectrum (νs + νas and νas + δ).
| S-EPMC9504856 | biostudies-literature