Advanced Electrodes for High Power Li-ion Batteries.
Ontology highlight
ABSTRACT:
SUBMITTER: Zaghib K
PROVIDER: S-EPMC5512962 | biostudies-other | 2013 Mar
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Dual-graphite batteries (DGBs), being an all-graphite-electrode variation of dual-ion batteries (DIBs), have attracted great attention in recent years as a possible low-cost technology for stationary energy storage due to the utilization of inexpensive graphite as a positive electrode (cathode) material. However, DGBs suffer from a low specific energy limited by the capacity of both electrode materials. In this work, a composite of black phosphorus with carbon (BP-C) is introduced as negative electrode (anode) material for DIB full-cells for the first time. The electrochemical behavior of the graphite || BP-C DIB cells is then discussed in the context of DGBs and DIBs using alloying anodes. Mechanistic studies confirm the staging behavior for anion storage in the graphite positive electrode and the formation of lithiated phosphorus alloys in the negative electrode. BP-C containing full-cells demonstrate promising electrochemical performance with specific energies of up to 319 Wh kg-1 (related to masses of both electrode active materials) or 155 Wh kg-1 (related to masses of electrode active materials and active salt), and high Coulombic efficiency. This work provides highly relevant insights for the development of advanced high-energy and safe DIBs incorporating BP-C and other high-capacity alloying materials in their anodes.
| S-EPMC9284155 | biostudies-literature
Project description:Tin-based materials are an emerging class of Li-ion anodes with considerable potential for use in high-energy-density Li-ion batteries. However, the long-lasting electrochemical performance of Sn remains a formidable challenge due to the large volume changes occurring upon its lithiation. The prevailing approaches toward stabilization of such electrodes involve embedding Sn in the form of nanoparticles (NPs) in an active/inactive matrix. The matrix helps to buffer the volume changes of Sn, impart better electronic connectivity and prevent particle aggregation upon lithiation/delithiation. Herein, facile synthesis of Sn NPs embedded in a SiOC matrix via the pyrolysis of a preceramic polymer as a single-source precursor is reported. This polymer contains Sn 2-ethyl-hexanoate (Sn(Oct)2) and poly(methylhydrosiloxane) as sources of Sn and Si, respectively. Upon functionalization with apolar divinyl benzene sidechains, the polymer is rendered compatible with Sn(Oct)2. This approach yields a homogeneous dispersion of Sn NPs in a SiOC matrix with sizes on the order of 5-30 nm. Anodes of the SiOC/Sn nanocomposite demonstrate high capacities of 644 and 553 mAh g-1 at current densities of 74.4 and 2232 mA g-1 (C/5 and 6C rates for graphite), respectively, and show superior rate capability with only 14% capacity decay at high currents.
| S-EPMC6774025 | biostudies-literature
Project description: Not available
| S-EPMC10860140 | biostudies-literature
Project description:We report a facile method to prepare a nanoarchitectured lithium manganate/graphene (LMO/G) hybrid as a positive electrode for Li-ion batteries. The Mn(2)O(3)/graphene hybrid is synthesized by exfoliation of graphene sheets and deposition of Mn(2)O(3) in a one-step electrochemical process, which is followed by lithiation in a molten salt reaction. There are several advantages of using the LMO/G as cathodes in Li-ion batteries: (1) the LMO/G electrode shows high specific capacities at high gravimetric current densities with excellent cycling stability, e.g., 84 mAh·g(-1) during the 500th cycle at a discharge current density of 5625 mA·g(-1) (~38.01 C capacity rating) in the voltage window of 3-4.5 V; (2) the LMO/G hybrid can buffer the Jahn-Teller effect, which depicts excellent Li storage properties at high current densities within a wider voltage window of 2-4.5 V, e.g., 93 mAh·g(-1) during the 300th cycle at a discharge current density of 5625 mA·g(-1) (~38.01 C). The wider operation voltage window can lead to increased theoretical capacity, e.g., 148 mAh·g(-1) between 3 and 4.5 V and 296 mAh·g(-1) between 2 and 4.5 V; (3) more importantly, it is found that the attachment of LMO onto graphene can help to reduce the dissolution of Mn(2+) into the electrolyte, as indicated by the inductively coupled plasma (ICP) measurements, and which is mainly attributed to the large specific surface area of the graphene sheets.
| S-EPMC3458596 | biostudies-literature
Project description:Materials with high-power charge-discharge capabilities are of interest to overcome the power limitations of conventional Li-ion batteries. In this study, a unique solvothermal synthesis of Li4Ti5O12 nanoparticles is proposed by using an off-stoichiometric precursor ratio. A Li-deficient off-stoichiometry leads to the coexistence of phase-separated crystalline nanoparticles of Li4Ti5O12 and TiO2 exhibiting reasonable high-rate performances. However, after the solvothermal process, an extended aging of the hydrolyzed solution leads to the formation of a Li4Ti5O12 nanoplate-like structure with a self-assembled disordered surface layer without crystalline TiO2. The Li4Ti5O12 nanoplates with the disordered surface layer deliver ultrahigh-rate performances for both charging and discharging in the range of 50-300C and reversible capacities of 156 and 113 mAh g-1 at these two rates, respectively. Furthermore, the electrode exhibits an ultrahigh-charging-rate capability up to 1200C (60 mAh g-1; discharge limited to 100C). Unlike previously reported high-rate half cells, we demonstrate a high-power Li-ion battery by coupling Li4Ti5O12 with a high-rate LiMn2O4 cathode. The full cell exhibits ultrafast charging/discharging for 140 and 12 s while retaining 97 and 66% of the anode theoretical capacity, respectively. Room- (25 °C), low- (- 10 °C), and high- (55 °C) temperature cycling data show the wide temperature operation range of the cell at a high rate of 100C.
| S-EPMC7770703 | biostudies-literature
Project description:We developed a novel battery system consisting of a hybrid (LiCoO2 + LiV3O8) cathode in a cell with a hybrid (graphite + Li-metal) anode and compared it with currently used systems. The hybrid cathode was synthesized using various ratios of LiCoO2:LiV3O8, where the 80:20 wt% ratio yielded the best electrochemical performance. The graphite and Li-metal hybrid anode, the composition of which was calculated based on the amount of non-lithiated cathode material (LiV3O8), was used to synthesize a full cell. With the addition of LiV3O8, the discharge capacity of the LiCoO2 + LiV3O8 hybrid cathode increased from 142.03 to 182.88 mA h g-1 (a 28.76% improvement). The energy density of this cathode also increased significantly, from 545.96 to 629.24 W h kg-1 (a 15.21% improvement). The LiCoO2 + LiV3O8 hybrid cathode was characterized through X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Its electrochemical performance was analyzed using a battery-testing system and electrochemical impedance spectroscopy. We expect that optimized synthesis conditions will enable the development of a novel battery system with an increase in energy density and discharge capacity.
| S-EPMC6631142 | biostudies-literature
Project description:The printing of three-dimensional (3D) porous electrodes for Li-ion batteries is considered a key driver for the design and realization of advanced energy storage systems. While different 3D printing techniques offer great potential to design and develop 3D architectures, several factors need to be addressed to print 3D electrodes, maintaining an optimal trade-off between electrochemical and mechanical performances. Herein, we report the first demonstration of 3D printed Si-based electrodes fabricated using a simple and cost-effective fused deposition modelling (FDM) method, and implemented as anodes in Li-ion batteries. To fulfil the printability requirement while maximizing the electrochemical performance, the composition of the FDM filament has been engineered using polylactic acid as the host polymeric matrix, a mixture of carbon black-doped polypyrrole and wet-jet milling exfoliated few-layer graphene flakes as conductive additives, and Si nanoparticles as the active material. The creation of a continuous conductive network and the control of the structural properties at the nanoscale enabled the design and realization of flexible 3D printed anodes, reaching a specific capacity up to ∼345 mA h g-1 at the current density of 20 mA g-1, together with a capacity retention of 96% after 350 cycles. The obtained results are promising for the fabrication of flexible polymeric-based 3D energy storage devices to meet the challenges ahead for the design of next-generation electronic devices.
| S-EPMC9042803 | biostudies-literature
Project description:Highly ordered mesoporous Co3O4 materials have been prepared via a nanocasting route with three-dimensional KIT-6 and two-dimensional SBA-15 ordered mesoporous silicas as templates and Co(NO3)2 · 6H2O as precursor. Through changing the hydrothermal treating temperature of the silica template, ordered mesoporous Co3O4 materials with hierarchical structures have been developed. The larger pores around 10 nm provide an efficient transport for Li ions, while the smaller pores between 3-5 nm offer large electrochemically active areas. Electrochemical impedance analysis proves that the hierarchical structure contributes to a lower charge transfer resistance in the mesoporous Co3O4 electrode than the mono-sized structure. High reversible capacities around 1141 mAh g(-1) of the hierarchically mesoporous Co3O4 materials are obtained, implying their potential applications for high performance Li-ion batteries.
| S-EPMC4726024 | biostudies-other
Project description:A strategy for growth of porous Ni?GeO? nanosheets on conductive nickel (Ni) foam with robust adhesion as a high-performance electrode for Li-ion batteries is proposed and realized, through a facile two-step method. It involves the low temperature hydro-thermal synthesis of bimetallic (Ni, Ge) hydroxide nanosheets precursor on Ni foam substrates and subsequent thermal transformation to porous Ni?GeO? nanosheets. The as-prepared Ni?GeO? nanosheets possess many interparticle mesopores with a size range from 5 to 15 nm. The hierarchical structure of porous Ni?GeO? nanosheets supported by Ni foam promises fast electron and ion transport, large electroactive surface area, and excellent structural stability. The efficacy of the specially designed structure is demonstrated by the superior electrochemical performance of the generated Ni?GeO? nanosheets including a high capacity of 1.8 mA·h·cm-2 at a current density of 50 ?A·cm-2, good cycle stability, and high power capability at room temperature. Because of simple conditions, this fabrication strategy may be easily extended to other mixed metal oxides (MxGeOy).
| S-EPMC5245747 | biostudies-literature
Project description:Hybrid nanomaterials where active battery nanoparticles are synthesized directly onto conductive additives such as graphene hold the promise of improving the cyclability and energy density of conversion and alloying type Li-ion battery electrodes. Here we investigate the evolution of hybrid reduced graphene oxide-tin sulfide (rGO-SnS2) electrodes during battery cycling. These hybrid nanoparticles are synthesized by a one-step solvothermal microwave reaction which allows for simultaneous synthesis of the SnS2 nanocrystals and reduction of GO. Despite the hybrid architecture of these electrodes, electrochemical impedance spectroscopy shows that the impedance doubles in about 25 cycles and subsequently gradually increases, which may be caused by an irreversible surface passivation of rGO by sulfur enriched conversion products. This surface passivation is further confirmed by post-mortem Raman spectroscopy of the electrodes, which no longer detects rGO peaks after 100 cycles. Moreover, galvanostatic intermittent titration analysis during the 1st and 100th cycles shows a drop in Li-ion diffusion coefficient of over an order of magnitude. Despite reports of excellent cycling performance of hybrid nanomaterials, our work indicates that in certain electrode systems, it is still critical to further address passivation and charge transport issues between the active phase and the conductive additive in order to retain high energy density and cycling performance.
| S-EPMC5547442 | biostudies-literature