Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Spinnability and Characteristics of Polyvinylidene Fluoride (PVDF)-based Bicomponent Fibers with a Carbon Nanotube (CNT) Modified Polypropylene Core for Piezoelectric Applications.

ABSTRACT: This research explains the melt spinning of bicomponent fibers, consisting of a conductive polypropylene (PP) core and a piezoelectric sheath (polyvinylidene fluoride). Previously analyzed piezoelectric capabilities of polyvinylidene fluoride (PVDF) are to be exploited in sensor filaments. The PP compound contains a 10 wt % carbon nanotubes (CNTs) and 2 wt % sodium stearate (NaSt). The sodium stearate is added to lower the viscosity of the melt. The compound constitutes the fiber core that is conductive due to a percolation CNT network. The PVDF sheath's piezoelectric effect is based on the formation of an all-trans conformation β phase, caused by draw-winding of the fibers. The core and sheath materials, as well as the bicomponent fibers, are characterized through different analytical methods. These include wide-angle X-ray diffraction (WAXD) to analyze crucial parameters for the development of a crystalline β phase. The distribution of CNTs in the polymer matrix, which affects the conductivity of the core, was investigated by transmission electron microscopy (TEM). Thermal characterization is carried out by conventional differential scanning calorimetry (DSC). Optical microscopy is used to determine the fibers' diameter regularity (core and sheath). The materials' viscosity is determined by rheometry. Eventually, an LCR tester is used to determine the core's specific resistance.

SUBMITTER: Glauß B

PROVIDER: S-EPMC5521223 | biostudies-other | 2013 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Core-Shell Nanofibers of Polyvinylidene Fluoride-based Nanocomposites as Piezoelectric Nanogenerators.

Project description:Flexible piezoelectric nanogenerators (PENG) are widely applied to harvest sustainable energy from multiple energy sources. The rational and simple design of PENG have great potential in soft electronics. Here we design a highly flexible PENG using the polyvinylidene fluoride (PVDF) and its copolymer, polyvinylidene hexafluoropropylene (PVDF-HFP) with two nanoarchitectures of semiconducting metal oxides, TiO2 and ZnO. The nanotubes of TiO2 and nanoflowers of ZnO are embedded in these different polymeric media by solvent mixing, and new fiber mats are generated by coaxial electrospinning technique. This process aligns the dipoles of polymers and nanomaterials, which is normally a pre-requisite for higher piezo potential. With excellent mechanical strength and flexibility, the tailored lightweight fiber mats are capable of producing good output voltage (a maximum of 14 V) during different mechanical vibrations at various frequencies and in response to human motions. The hybrid nanocomposite PENG is durable and inexpensive and has possible applications in wearable electronics.

| S-EPMC7601985 | biostudies-literature

Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting.

Project description:Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications.

| S-EPMC7497623 | biostudies-literature

Cesium Lead Halide Perovskite Decorated Polyvinylidene Fluoride Nanofibers for Wearable Piezoelectric Nanogenerator Yarns.

Project description:Piezoelectric nanogenerators (PENGs) provide a viable solution to convert the mechanical energy generated by body movement to electricity. One-dimensional yarns offer a platform for flexible wearable textile PENGs, which can conform to body for comfort and efficient energy harvesting. In this context, we report a flexible piezoelectric yarn, assembled by one-step cocentric deposition of cesium lead halide perovskite decorated polyvinylidene fluoride (PVDF) nanofibers, on a stainless-steel yarn. Perovskite crystals were formed in situ during electrospinning. Our work demonstrates a nanofiber morphology in which perovskite crystals spread over the nanofiber, leading to a rough surface, and complementing piezoelectric nanocomposite formation with PVDF for superior stress excitation. We investigated how the halide anions of perovskite affect the piezoelectric performance of PENG yarns by comparing CsPbBr3 and CsPbI2Br. Effects of the perovskite concentration, annealing temperature, and deposition time on the piezoelectric properties of PENG yarns were investigated. Devices assembled with a single yarn of CsPbI2Br decorated PVDF nanofibers yield the optimal performance with an output voltage of 8.3 V and current of 1.91 μA in response to pressing from an actuator and used to charge capacitors for powering electronics. After aging in the ambient environment for 3 months, the device maintained its performance during 19,200 cycles of mechanical stresses. The excellent and stable electrical performance can be ascribed to the optimized crystallization of CsPbI2Br crystals, their complementing performance with PVDF, and formation of nanofibers with uniformity and strength. The flexibility of piezoelectric yarns enables them to be bent, twisted, braided, and woven for different textile integrations while harvesting energy from body movements, demonstrating the potential for wearable mechanical energy harvesting.

| S-EPMC9878976 | biostudies-literature

Effects of Porosity on Piezoelectric Characteristics of Polyvinylidene Fluoride Films for Biomedical Applications.

Project description:Objective: The objective of this work is to study the effects of porosity on mechanical and piezoelectric properties of polyvinylidene fluoride (PVDF) films for biomedical applications. Impact Statement: By investigating the piezoelectric properties of PVDF and the porosity effect on its electromechanical performance, there is potential for further development of PVDF as a hemodynamic sensor that can lead to further technological advancements in the biomedical field, benefiting patients and physicians alike. Introduction: PVDF thin films have shown potential in the application of hemodynamic flow sensing and monitoring the effects on blood flow caused by prosthetic valve implantation via the transcatheter aortic valve replacement operation. The piezoelectric performance of PVDF films can be influenced by the porosity of the material. Methods: In this study, strain tracking was performed on thin film PVDF specimens with various levels of porosity and pore sizes to determine the mechanical properties of the specimens. The mechanical properties were used to model the PVDF material in COMSOL multiphysics software, in which compression test simulations were performed to determine the piezoelectric coefficient d33 of the PVDF. Results: A decline in the elastic modulus was found to be highly inversely correlated with porosity of the specimens and the simulation results show that elastic modulus had a much greater effect on the piezoelectric properties than Poisson's ratio. Conclusion: A combination of experimental and computational techniques was able to characterize and correlate the mechanical properties of PVDF films of varying porosities to their piezoelectric properties.

| S-EPMC10328389 | biostudies-literature

Fabrication, Polarization of Electrospun Polyvinylidene Fluoride Electret Fibers and Effect on Capturing Nanoscale Solid Aerosols.

Project description:Electrospun polyvinylidene fluoride (PVDF) fiber mats with average fiber diameters (?200 nm, ?2000 nm) were fabricated by controlled electrospinning conditions. These fiber mats were polarized using a custom-made device to enhance the formation of the electret ?-phase ferroelectric property of the fibers by simultaneous uniaxial stretching of the fiber mat and heating the mat to the Curie temperature of the PVDF polymer in a strong electric field of 2.5 kV/cm. Scanning electron microscopy, Fourier transform infrared spectroscopy, thermal gravimetric analysis, differential scanning calorimetry and Brunauer-Emmett-Teller (BET) surface area analyses were performed to characterize both the internal and external morphologies of the fiber mat samples to study polarization-associated changes. MATLAB simulations revealed the changes in the paths of the electric fields and the magnetic flux inside the polarization field with inclusion of the ferroelectric fiber mats. Both polarized and unpolarized fiber mats were challenged as filters against NaCl particles with average particle diameters of about 150 nm using a TSI 8130 to study capture efficiencies and relative pressure drops. Twelve filter experiments were conducted on each sample at one month time intervals between experiments to evaluate the reduction of the polarization enhancement over time. The results showed negligible polarization loss for the 200-nm fiber sample. The polarized mats had the highest filter efficiencies and lowest pressure drops.

| S-EPMC5510728 | biostudies-literature

Carbon Nanotube versus Graphene Nanoribbon: Impact of Nanofiller Geometry on Electromagnetic Interference Shielding of Polyvinylidene Fluoride Nanocomposites.

Project description:The similar molecular structure but different geometries of the carbon nanotube (CNT) and graphene nanoribbon (GNR) create a genuine opportunity to assess the impact of nanofiller geometry (tube vs. ribbon) on the electromagnetic interference (EMI) shielding of polymer nanocomposites. In this regard, GNR and its parent CNT were melt mixed with a polyvinylidene fluoride (PVDF) matrix using a miniature melt mixer at various nanofiller loadings, i.e., 0.3, 0.5, 1.0 and 2.0 wt%, and then compression molded. Molecular simulations showed that CNT would have a better interaction with the PVDF matrix in any configuration. Rheological results validated that CNTs feature a far stronger network (mechanical interlocking) than GNRs. Despite lower powder conductivity and a comparable dispersion state, it was interestingly observed that CNT nanocomposites indicated a highly superior electrical conductivity and EMI shielding at higher nanofiller loadings. For instance, at 2.0 wt%, CNT/PVDF nanocomposites showed an electrical conductivity of 0.77 S·m-1 and an EMI shielding effectiveness of 11.60 dB, which are eight orders of magnitude and twofold higher than their GNR counterparts, respectively. This observation was attributed to their superior conductive network formation and the interlocking ability of the tubular nanostructure to the ribbon-like nanostructure, verified by molecular simulations and rheological assays.

| S-EPMC6632034 | biostudies-literature

Application of a triblock copolymer additive modified polyvinylidene fluoride membrane for effective oil/water separation.

Project description:A hollow fibre membrane was fabricated by blending polyvinylidene fluoride (PVDF) with a triblock copolymer additive polymer that has both hydrophilic and oleophobic surface properties. The novel membrane was characterized and examined for oil/water separation under various system conditions, including different cross-flow rate, feed temperature, trans-membrane pressure, and its rejection and cleaning efficiency, etc. By applying the membrane into the filtration of synthesized oil/water emulsion, the membrane constantly achieved an oil rejection rate of above 99%, with a relatively constant permeate flux varied in the range of 68.9-59.0?l?m-2?h-1. More importantly, the fouling of the used membrane can be easily removed by simple water flushing. The membrane also demonstrated a wide adaptability for different types of real oily wastewater, even at very high feed oil concentration (approx. 115?000?mg?l-1 in terms of chemical oxygen demand (COM)). Hence, the novel triblock copolymer additive-modified PVDF membrane can have a great prospect in the continuing effort to expand the engineering application of polymeric membranes for oily wastewater treatment.

| S-EPMC5990766 | biostudies-literature

Boosted Mechanical Piezoelectric Energy Harvesting of Polyvinylidene Fluoride/Barium Titanate Composite Porous Foam Based on Three-Dimensional Printing and Foaming Technology.

Project description:The popularity of intelligent and green electronic devices means that the use of renewable mechanical energy has gradually become an inevitable choice for social development. However, it is difficult for the existing energy harvesters to meet the requirement for efficient collection of discrete mechanical energy due to the limitation of traditional two-dimensional (2D) film deformation. In this research, a green and convenient supercritical carbon dioxide foaming (Sc-CO2)-assisted selective laser sintering method was developed, and piezoelectric energy harvesters with a 3D porous structure of polyvinylidene fluoride (PVDF)/barium titanate (BaTiO3) were successfully constructed. The 3D structure combined with the porous structure made full use of the normal space, amplified the stress-strain effect, and improved the piezoelectric output capability. Under the synergistic effect of BaTiO3, the foams exhibited high output with an output voltage of 20.9 V and a current density of 0.371 nA/mm2, which exceeded most of the known PVDF/BaTiO3 energy harvesters, and the prepared piezoelectric energy harvester could directly light up 11 green light-emitting diodes and charge a 1 μF commercial capacitor to 4.98 V within 180 s. This work emphasizes the key role of 3D printing and Sc-CO2 foaming in fabricating 3D piezoelectric energy harvesters.

| S-EPMC8600620 | biostudies-literature

Polypropylene and polyvinylidene fluoride transobturator slings for the treatment of female stress urinary incontinence: 1-Year outcomes from a multicentre randomized trial.

Project description:AimsTo compare the effectiveness and safety of polypropylene (PP) and polyvinylidene fluoride (PVDF) transobturator tapes (TOT) for the treatment of female stress urinary incontinence (SUI).MethodsThis is a multicentre randomized trial. Women with SUI or stress-predominant mixed urinary incontinence and scheduled for a TOT procedure were randomized to PP or PVDF slings. The primary outcome was 1-year cure or improvement rate using composite criteria. Complications were also compared. Relationships with outcomes were analyzed using multivariable logistic regressions models.ResultsFrom April 2016 to January 2018 285 participants were randomized. PP and PVDF slings showed similar high cure or improvement rate (91.0% vs. 95.6%, p?=?.138). Improvement in validated questionnaires was also similar. PVDF slings were associated with a lower rate of de novo urgency incontinence (adjusted odds ratio?=?0.35; 95% confidence interval?=?0.15-0.80). We found no statistical differences in complications rates, although a higher incidence of long-term pain events were observed in the PP group. The study is underpowered to find differences in specific complications owing to the low number of events.ConclusionPP and PVDF TOTs are equally effective, although PVDF is associated with fewer cases of de novo urgency incontinence. Further studies are needed to give robust conclusions on safety profiles.

| S-EPMC7839450 | biostudies-literature

Temperature Responsive PBT Bicomponent Fibers for Dynamic Thermal Insulation.

Project description:Thermoresponsive self-crimping polybutylene terephtlate (PBT)-based bicomponent fibers were fabricated by melt-spinning to serve as primary constituents for textiles, such as nonwoven battings, for an adaptive single insulting layer. Due to the intrinsically mismatching modulus and coefficient of thermal expansion (CTE), the fibers curl or straighten with temperature, similar to the concept of Timoshenko's bimetallic strip. Maximizing the curvature is driven by an optimum of fiber diameter, overall CTE, and fiber moduli, which are all affected by drawing ratio and, consequently, fiber's microstructure. A draw ratio of 2.33 yielded the best combination of mechanical and thermal properties; it was observed that increasing the draw ratio does not necessarily increase the self-crimping behavior. Tests performed on non-woven battings of these fibers exhibited comparable thermoreponsive behaviors to polypropylene-based thermoresponsive fibers from previous studies in the -20 °C to 20 °C temperature range, which has potential for wearable insulations for both commercial and defense sectors alike.

| S-EPMC9323749 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data