A SIMPLE COLD STAINING METHOD FOR ACID FAST BACILLI.
Ontology highlight
ABSTRACT:
SUBMITTER: Lahiri KK
PROVIDER: S-EPMC5529720 | biostudies-other | 1994 Oct
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Histopathology is the study of how disease alters human and animal tissue and is based on the microscopic examination of stained tissue sections. To maintain tissue integrity, preserving it from degradation, it is initially fixed, primarily with formalin, before being treated with alcohol and organic solvents, allowing the infiltration of paraffin wax. The tissue can then be embedded in a mold and sectioned, usually at a thickness between 3 and 5 μm, before staining with dyes or antibodies to demonstrate specific components. As the paraffin wax is insoluble in water, it is necessary to remove it from the tissue section before applying any aqueous or water-based dye solution, to allow the tissue to successfully interact with the stain. This deparaffinization/hydration step is normally carried out using xylene, an organic solvent, followed by hydration using graded alcohols. However, this use of xylene has been shown to have detrimental effects on acid-fast stains (AFS), such as those employed to demonstrate Mycobacterium, including the causative agent of tuberculosis (TB), as the integrity of the lipid-rich wall present in these bacteria may be compromised using xylene. A simple, novel method, Projected Hot Air Deparaffinization (PHAD) removes the solid paraffin from the tissue section without the use of any solvents, which produces significantly improved staining results using AFS. PHAD relies on the projection of hot air onto the histological section to melt and remove paraffin from the tissue, which can be achieved using a common hairdryer. •PHAD relies on the projection of hot air onto the histological section which can be achieved using a common hairdryer.•The blowing force is such that melted paraffin is removed from the tissue in 20 min.•Subsequent hydration allows for using aqueous histological stains with success, such as the fluorescent auramine O acid-fast-stain.
| S-EPMC9971263 | biostudies-literature
Project description: Not available
| S-EPMC6423104 | biostudies-literature
Project description:Tumor spheroids are becoming an important tool for the investigation of cancer stem cell (CSC) function in tumors; thus, low-cost and high-throughput methods for drug screening of tumor spheroids are needed. Using neurospheres as non-adherent three-dimensional (3-D) cultures, we developed a simple, low-cost acridine orange (AO)-based method that allows for rapid analysis of live neurospheres by fluorescence microscopy in a 96-well format. This assay measures the cross-section area of a spheroid, which corresponds to cell viability. Our novel method allows rapid screening of a panel of anti-proliferative drugs to assess inhibitory effects on the growth of cancer stem cells in 3-D cultures.
| S-EPMC4772731 | biostudies-literature
Project description:The explosive growth of genomic data provides an opportunity to make increased use of protein markers for phylogenetic inference. We have developed an automated pipeline for phylogenomic analysis (AMPHORA) that overcomes the existing bottlenecks limiting large-scale protein phylogenetic inference. We demonstrated its high throughput capabilities and high quality results by constructing a genome tree of 578 bacterial species and by assigning phylotypes to 18,607 protein markers identified in metagenomic data collected from the Sargasso Sea.
| S-EPMC2760878 | biostudies-other
Project description:Observing the process of growth and differentiation of tissues and organs is of crucial importance for the understanding of the evolution of organs in animals. Unfortunately, it is notoriously difficult to continuously monitor developmental processes due to the extended time they take. Long-term labeling of the tissues of interest represents a promising alternative to raise these pivotal data. In the case of the prototroch, a band of ciliated cells typical of marine, planktotrophic trochophora larvae, we were able to apply a long-term fluorescent vital-staining to the prototroch cells that remains detectable throughout further larval life. We were able to stain ciliated cells of planktonic larvae from different spiralian clades by using long-chain dialkylcarbocyanine dyes that are detectable in different fluorescent emission spectra in combination with a non-ionic surfactant. The larvae survived and developed normally, their ciliated cells retaining the originally applied fluorescent labels. Combined with additional fluorescent staining of the larvae after fixation, we provide an easy, versatile, and broadly applicable method to investigate the processes of the differentiation of epidermal organs in various aquatic larvae.
| S-EPMC7300427 | biostudies-literature
Project description:X-ray microtomography (microCT) enables histological-scale 3D imaging of many types of biological samples, but it has yet to rival traditional histology for differentiation of tissue types and cell components. This report presents prima facie results indicating that a simple lead(II) acetate staining solution can impart preferential X-ray contrast to cell nuclei. While not strictly selective for nuclei, the staining reflects local cell-density differences. It can be applied in a single overnight treatment and does not require hematoxylin staining or drying of the sample. The stain is removable with EDTA, and it may enhance early calcifications. A basic protocol is given as a guide for further testing and optimization.
| S-EPMC7930760 | biostudies-literature
Project description:This communication describes a simple way to improve the sensitivity of spectroscopic ellipsometry, when applied to monitor the adsorption of proteins to solid surfaces. The method described herein is based on the reaction of a commercially available dye (Coomassie brilliant blue G) with the adsorbed proteins and the subsequent analysis by spectroscopic ellipsometry. In order to demonstrate the potential advantages of this method, the adsorption of bovine serum albumin to an antifouling coating was also investigated. According to our results, the modification with the dye significantly affects the optical properties of the adsorbed protein layer, which can be represented using a simple optical model (Lorentz). In general, the proposed modification increases the sensitivity of the detection by 2.5 ± 0.4-fold and enables the analysis of thin layers of adsorbed protein not obtainable by conventional methods. These results particularly reveal the importance of the proposed modification for the evaluation of low adsorbing substrates and antifouling coatings.
| S-EPMC2952718 | biostudies-literature
Project description:An unbiased sample preparation free of interferents (i.e., competing analytes, detergents, plastics) is critical to any lipid MS workflow. Here we present a novel three-phase lipid extraction (3PLE) technique using a single-step liquid-liquid extraction (LLE) that allows both extraction and fractionation of lipids by polarity. 3PLE is composed of one aqueous and two organic phases. The upper organic phase is enriched in neutral lipids (triacylglycerols and cholesteryl esters), while the middle organic phase contains the major glycerophospholipids. Thin-layer chromatography, radioactive labeling, and MS were used to confirm lipid partitioning. 3PLE efficiency was demonstrated for bovine liver, human pooled plasma, mouse liver, mouse brain, and mouse white adipose tissue. Compared with the gold-standard Bligh/Dyer LLE, 3PLE showed significant advantages. For direct-infusion workflows, there was a decrease in ion suppression with a corresponding increased number of lipid species identified. For LC/MS workflows, increased signal intensities were observed for lower-abundance lipid species such as phosphatidic acid and phosphatidylserine. 3PLE also proved to be a valuable tool for fatty acid profiling by GC/MS, allowing for the separate identification of neutral and polar fatty acids.
| S-EPMC6399505 | biostudies-literature
Project description:Simple staining of cells is a widely used method in basic medical diagnostics, education, and research laboratories. The stains are low-cost, but the extensive consumption results in excessive toxic waste generation. Thus, to decrease the amount of toxic waste resulting from the cell staining procedure is a need. In this study, we developed a magnetically driven and compartmentalized passive microfluidic chip to perform simple staining of human eukaryotic cells, K562 cells, and lymphocyte cells derived from patients. We demonstrated simple staining on cells with trypan blue, methylene blue, crystal violet, and safranin for high, medium, and low cell densities. The stained cells were imaged using a bright field optical microscope and a cell phone to count cells on the focal plane. The staining improved the color signal of the cell by 25-135-pixel intensity changes for the microscopic images. The validity of the protocol was determined using Jurkat and MDA-MB-231 cell lines as negative controls. In order to demonstrate the practicality of the system, lymphocyte cells derived from human blood samples were stained with trypan blue. The color intensity changes in the first and last compartments were analyzed to evaluate the performance of the chip. The developed method is ultra-low cost, significantly reduces the waste generated, and can be integrated with mobile imaging devices in terms of portability. By combining microfabrication technology with cell staining, this study reported a novel contribution to the field of microfluidic biosensors. In the future, we expect to demonstrate the detection of pathogens using this method.
| S-EPMC9688635 | biostudies-literature
Project description:BackgroundDrug susceptibility testing for Mycobacterium tuberculosis (MTB) is difficult to perform in resource-limited settings where Acid Fast Bacilli (AFB) smears are commonly used for disease diagnosis and monitoring. We developed a simple method for extraction of MTB DNA from AFB smears for sequencing-based detection of mutations associated with resistance to all first and several second-line anti-tuberculosis drugs.MethodsWe isolated MTB DNA by boiling smear content in a Chelex solution, followed by column purification. We sequenced PCR-amplified segments of the rpoB, katG, embB, gyrA, gyrB, rpsL, and rrs genes, the inhA, eis, and pncA promoters and the entire pncA gene.ResultsWe tested our assay on 1,208 clinically obtained AFB smears from Ghana (n = 379), Kenya (n = 517), Uganda (n = 262), and Zambia (n = 50). Coverage depth varied by target and slide smear grade, ranging from 300X to 12000X on average. Coverage of ≥20X was obtained for all targets in 870 (72%) slides overall. Mono-resistance (5.9%), multi-drug resistance (1.8%), and poly-resistance (2.4%) mutation profiles were detected in 10% of slides overall, and in over 32% of retreatment and follow-up cases.ConclusionThis rapid AFB smear DNA-based method for determining drug resistance may be useful for the diagnosis and surveillance of drug-resistant tuberculosis.
| S-EPMC7209238 | biostudies-literature