Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mechanochemical synthesis of graphene oxide-supported transition metal catalysts for the oxidation of isoeugenol to vanillin.

ABSTRACT: Vanillin is one of the most commonly used natural products, which can also be produced from lignin-derived feedstocks. The chemical synthesis of vanillin is well-established in large-scale production from petrochemical-based starting materials. To overcome this problem, lignin-derived monomers (such as eugenol, isoeugenol, ferulic acid etc.) have been effectively used in the past few years. However, selective and efficient production of vanillin from these feedstocks still remains an issue to replace the existing process. In this work, new transition metal-based catalysts were proposed to investigate their efficiency in vanillin production. Reduced graphene oxide supported Fe and Co catalysts showed high conversion of isoeugenol under mild reaction conditions using H2O2 as oxidizing agent. Fe catalysts were more selective as compared to Co catalysts, providing a 63% vanillin selectivity at 61% conversion in 2 h. The mechanochemical process was demonstrated as an effective approach to prepare supported metal catalysts that exhibited high activity for the production of vanillin from isoeugenol.

SUBMITTER: Franco A

PROVIDER: S-EPMC5530631 | biostudies-other | 2017

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Stable iridium dinuclear heterogeneous catalysts supported on metal-oxide substrate for solar water oxidation.

Project description:Atomically dispersed catalysts refer to substrate-supported heterogeneous catalysts featuring one or a few active metal atoms that are separated from one another. They represent an important class of materials ranging from single-atom catalysts (SACs) and nanoparticles (NPs). While SACs and NPs have been extensively reported, catalysts featuring a few atoms with well-defined structures are poorly studied. The difficulty in synthesizing such structures has been a critical challenge. Here we report a facile photochemical method that produces catalytic centers consisting of two Ir metal cations, bridged by O and stably bound to a support. Direct evidence unambiguously supporting the dinuclear nature of the catalysts anchored on ?-Fe2O3 is obtained by aberration-corrected scanning transmission electron microscopy (AC-STEM). Experimental and computational results further reveal that the threefold hollow binding sites on the OH-terminated surface of ?-Fe2O3 anchor the catalysts to provide outstanding stability against detachment or aggregation. The resulting catalysts exhibit high activities toward H2O photooxidation.

| S-EPMC5866603 | biostudies-literature

Metal Phosphate-Supported Pt Catalysts for CO Oxidation.

Project description:Oxides (such as SiO₂, TiO₂, ZrO₂, Al₂O₃, Fe₂O₃, CeO₂) have often been used to prepare supported Pt catalysts for CO oxidation and other reactions, whereas metal phosphate-supported Pt catalysts for CO oxidation were rarely reported. Metal phosphates are a family of metal salts with high thermal stability and acid-base properties. Hydroxyapatite (Ca10(PO₄)₆(OH)₂, denoted as Ca-P-O here) also has rich hydroxyls. Here we report a series of metal phosphate-supported Pt (Pt/M-P-O, M = Mg, Al, Ca, Fe, Co, Zn, La) catalysts for CO oxidation. Pt/Ca-P-O shows the highest activity. Relevant characterization was conducted using N₂ adsorption-desorption, inductively coupled plasma (ICP) atomic emission spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), CO₂ temperature-programmed desorption (CO₂-TPD), X-ray photoelectron spectroscopy (XPS), and H₂ temperature-programmed reduction (H₂-TPR). This work furnishes a new catalyst system for CO oxidation and other possible reactions.

| S-EPMC5456429 | biostudies-literature

Sol-Gel Synthesis of Ruthenium Oxide Nanowires To Enhance Methanol Oxidation in Supported Platinum Nanoparticle Catalysts.

Project description:A template-directed, sol-gel synthesis is utilized to produce crystalline RuO2 nanowires. Crystalline nanowires with a diameter of 128 ± 15 nm were synthesized after treating the nanowires at 600 °C in air. Analysis of these nanowires by X-ray powder diffraction revealed the major crystalline phase to be tetragonal RuO2 with a small quantity of metallic ruthenium present. Further analysis of the nanowire structures by high-resolution transmission electron microscopy reveals that they are polycrystalline and are composed of interconnected, highly crystalline, nanoparticles having an average size of ∼25 nm. Uniform 3 nm Pt nanoparticles were dispersed on the surface of RuO2 nanowires using an ambient, solution-based technique yielding a hybrid catalyst for methanol oxidation. Linear sweep voltammograms (LSVs) and chronoamperometry performed in the presence of methanol in an acidic electrolyte revealed a significant enhancement in the onset potential, mass activity, and long-term stability compared with analogous Pt nanoparticles supported on commercially available Vulcan XC-72R carbon nanoparticles. Formic acid oxidation LSVs and CO stripping voltammetry revealed that the RuO2-supported Pt nanoparticles exhibit significantly higher CO tolerance, which leads to higher catalytic stability over a period of several hours. X-ray photoelectron spectroscopy results suggest that crystalline RuO2 leads to less-significant oxidation of the Pt surface relative to more widely studied hydrous RuO2 supports, thereby increasing catalytic performance.

| S-EPMC6733171 | biostudies-literature

Selenium-transition metal supported on a mixture of reduced graphene oxide and silica template for water splitting.

Project description:Exploration of economical, highly efficient, and environment friendly non-noble-metal-based electrocatalysts is necessary for hydrogen and oxygen evolution reactions (HER and OER) but challenging for cost-effective water splitting. Herein, metal selenium nanoparticles (M = Ni, Co & Fe) are anchored on the surface of reduced graphene oxide and a silica template (rGO-ST) through a simple one-pot solvothermal method. The resulting electrocatalyst composite can enhance mass/charge transfer and promote interaction between water molecules and electrocatalyst reactive sites. NiSe2/rGO-ST shows a remarkable overpotential (52.5 mV) at 10 mA cm-2 for the HER compared to the benchmark Pt/C E-TEK (29 mV), while the overpotential values of CoSeO3/rGO-ST and FeSe2/rGO-ST are 246 and 347 mV, respectively. The FeSe2/rGO-ST/NF shows a low overpotential (297 mV) at 50 mA cm-2 for the OER compared to RuO2/NF (325 mV), while the overpotentials of CoSeO3-rGO-ST/NF and NiSe2-rGO-ST/NF are 400 and 475 mV, respectively. Furthermore, all catalysts indicate negligible deterioration, indicating better stability during the process of HER and OER after a stability test of 60 h. The water splitting system composed of NiSe2-rGO-ST/NF||FeSe2-rGO-ST/NF electrodes requires only ∼1.75 V at 10 mA cm-2. Its performance is nearly close to that of a noble metal-based Pt/C/NF||RuO2/NF water splitting system.

| S-EPMC10209667 | biostudies-literature

Metal Oxide Oxidation Catalysts as Scaffolds for Perovskite Solar Cells.

Project description:Whilst the highest power conversion efficiency (PCE) perovskite solar cell (PSC) devices that have reported to date have been fabricated by high temperature sintering (>500 °C) of mesoporous metal oxide scaffolds, lower temperature processing is desirable for increasing the range of substrates available and also decrease the energy requirements during device manufacture. In this work, titanium dioxide (TiO2) mesoporous scaffolds have been compared with metal oxide oxidation catalysts: cerium dioxide (CeO2) and manganese dioxide (MnO2). For MnO2, to the best of our knowledge, this is the first time a low energy band gap metal oxide has been used as a scaffold in the PSC devices. Thermal gravimetric analysis (TGA) shows that organic binder removal is completed at temperatures of 350 °C and 275 °C for CeO2 and MnO2, respectively. By comparison, the binder removal from TiO2 pastes requires temperatures >500 °C. CH3NH3PbBr3 PSC devices that were fabricated while using MnO2 pastes sintered at 550 °C show slightly improved PCE (η = 3.9%) versus mesoporous TiO2 devices (η = 3.8%) as a result of increased open circuit voltage (Voc). However, the resultant PSC devices showed no efficiency despite apparently complete binder removal during lower temperature (325 °C) sintering using CeO2 or MnO2 pastes.

| S-EPMC7079644 | biostudies-literature

Graphene-oxide-supported ultrathin Au nanowires: efficient electrocatalysts for borohydride oxidation.

Project description:We report stable ultrathin Au nanowires supported on reduced graphene oxide with outstanding electrocatalytic activity for borohydride oxidation. Electrochemical impedance spectroscopy measurements showed abnormal inductive behavior, indicative of surface reactivation. DFT calculations indicate that the origin of the high activity stems from the position of the Au d-band center.

| S-EPMC4757964 | biostudies-literature

Selective Oxidation of HMF via Catalytic and Photocatalytic Processes Using Metal-Supported Catalysts.

Project description:In this study, 5-hydroxymethylfurfural (HMF) oxidation was carried out via both the catalytic and the photocatalytic approach. Special attention was devoted to the preparation of the TiO₂-based catalysts, since this oxide has been widely used for catalytic and photocatalytic application in alcohol oxidation reactions. Thus, in the catalytic process, the colloidal heterocoagulation of very stable sols, followed by the spray-freeze-drying (SFD) approach, was successfully applied for the preparation of nanostructured porous TiO₂-SiO₂ mixed-oxides with high surface areas. The versatility of the process made it possible to encapsulate Pt particles and use this material in the liquid-phase oxidation of HMF. The photocatalytic activity of a commercial titania and a homemade oxide prepared with the microemulsion technique was then compared. The influence of gold, base addition, and oxygen content on product distribution in the photocatalytic process was evaluated.

| S-EPMC6278393 | biostudies-literature

Towards a general growth model for graphene CVD on transition metal catalysts.

Project description:The chemical vapour deposition (CVD) of graphene on three polycrystalline transition metal catalysts, Co, Ni and Cu, is systematically compared and a first-order growth model is proposed which can serve as a reference to optimize graphene growth on any elemental or alloy catalyst system. Simple thermodynamic considerations of carbon solubility are insufficient to capture even basic growth behaviour on these most commonly used catalyst materials, and it is shown that kinetic aspects such as carbon permeation have to be taken into account. Key CVD process parameters are discussed in this context and the results are anticipated to be highly useful for the design of future strategies for integrated graphene manufacture.

| S-EPMC4755235 | biostudies-literature

The highest oxidation state observed in graphene-supported sub-nanometer iron oxide clusters.

Project description:Size-selected iron oxide nanoclusters are outstanding candidates for technological-oriented applications due to their high efficiency-to-cost ratio. However, despite many theoretical studies, experimental works on their oxidation mechanism are still limited to gas-phase clusters. Herein we investigate the oxidation of graphene-supported size-selected Fen clusters by means of high-resolution X-ray Photoelectron Spectroscopy. We show a dependency of the core electron Fe 2p3/2 binding energy of metallic and oxidized clusters on the cluster size. Binding energies are also linked to chemical reactivity through the asymmetry parameter which is related to electron density of states at the Fermi energy. Upon oxidation, iron atoms in clusters reach the oxidation state Fe(II) and the absence of other oxidation states indicates a Fe-to-O ratio close to 1:1, in agreement with previous theoretical calculations and gas-phase experiments. Such knowledge can provide a basis for a better understanding of the behavior of iron oxide nanoclusters as supported catalysts.

| S-EPMC10070315 | biostudies-literature

Size Effect of Graphene Oxide on Graphene-Aerogel-Supported Au Catalysts for Electrochemical CO<sub>2</sub> Reduction.

Project description:The lateral size of graphene nanosheets plays a critical role in the properties and microstructure of 3D graphene as well as their application as supports of electrocatalysts for CO2 reduction reactions (CRRs). Here, graphene oxide (GO) nanosheets with different lateral sizes (1.5, 5, and 14 µm) were utilized as building blocks for 3D graphene aerogel (GA) to research the size effects of GO on the CRR performances of 3D Au/GA catalysts. It was found that GO-L (14 µm) led to the formation of GA with large pores and a low surface area and that GO-S (1.5 µm) induced the formation of GA with a thicker wall and isolated pores, which were not conducive to the mass transfer of CO2 or its interaction with catalysts. Au/GA constructed with a suitable-sized GO (5 µm) exhibited a hierarchical porous network and the highest surface area and conductivity. As a result, Au/GA-M exhibited the highest Faradaic efficiency (FE) of CO (FECO = 81%) and CO/H2 ratio at -0.82 V (vs. a Reversible Hydrogen Electrode (RHE)). This study indicates that for 3D GA-supported catalysts, there is a balance between the improvement of conductivity, the adsorption capacity of CO2, and the inhibition of the hydrogen evolution reaction (HER) during the CRR, which is related to the lateral size of GO.

| S-EPMC10650518 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data