Improvement in Char Strength with an Open Cage Silsesquioxane Flame Retardant.
Ontology highlight
ABSTRACT:
SUBMITTER: Bautista Y
PROVIDER: S-EPMC5541295 | biostudies-other | 2017 May
REPOSITORIES: biostudies-other
Similar Datasets
Project description:There have been many attempts to compile comprehensive lists of flame retardants. However, this goal has proven challenging due to the heterogeneity of compounds that can be used as flame retardants coupled with changes in formulation chemistry over time. Flame retardants have been the focus of many recent existing hazard, exposure, and risk assessments. These assessments have been class-based or for individual chemical substances. Here, diverse sets of publicly available data sources from governmental organizations and the open literature were compiled to develop an inventory of chemicals used as flame retardants and organohalogen flame retardants. The chemical substances from these data sources were mapped to appropriate chemical identifiers via manual curation and deduplicated. Despite different data sources containing a large number of overlapping chemical substances, compiling information from multiple data sources was found to increase the breadth of potential flame retardant chemistries. The flame retardant and organohalogen flame retardant inventories were developed as a resource for scientists interested in better understanding properties of flame retardant and organohalogen flame retardant classes. Measurement(s)chemical use informationTechnology Type(s)manual and automated literature collection
| S-EPMC9192637 | biostudies-literature
Project description:In this study, to develop an organic/inorganic synergistic flame retardant and to reduce the dosage and cost of flame retardants, organic/inorganic synergistic flame retardants, hexakis(4-boronic acid-phenoxy)-cyclophosphazene (CP-6B), and magnesium hydroxide (MH) were chosen. The flame retardant properties of CP-6B/MH in epoxy resin (EP) were discussed. EP/CP-6B/MH had better flame retardancy and heat resistance compared with EP/CP-6B and EP/MH. A limiting oxygen index of EP/3.0%CP-6B/0.5%MH of 31.9% was achieved, and vertical burning V-0 rating was achieved. Compared with EP, the cone calorimeter dates of EP/CP-6B/MH decreased. CP-6B/MH inhibited combustion and did little to damage mechanical properties. Besides, the flame retardant mechanism was studied by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and pyrolysis-gas chromatography-mass spectrometry. CP-6B/MH exerted good synergistic effects.
| S-EPMC6648587 | biostudies-literature
Project description:Calcium alginate (Ca-Alg) fibers are renewable fibers obtained from the ocean with essential flame retardancy, which have recently been applied as components of flame-retardant paper. However, the application of Ca-Alg fibers is limited because of their tendency to smolder. Therefore, composites papers were fabricated by blending using flame-retardant polyamide-66 (FR-PA), with a 5 wt% content of phosphorous flame retardant, which will form molten carbon during combustion. When the FR-PA content is 30% of the composite paper, FR-PA forms a compact carbon layer on the surface of the Ca-Alg fibers during combustion, which isolates the mass/heat transfer and effectively suppresses the smoldering of Ca-Alg. This consists of a condensed flame retardant mechanism. Furthermore, the combustion and thermal degradation behavior of paper were analyzed by cone calorimetry (CONE), TG and TG-IR. Ca-Alg in the composite paper decomposed and released CO2 before ignition, which delayed the ignition time. Simultaneously, the FR-PA contained in the composite paper effectively inhibited the combustion of volatile combustibles in the gas phase. Overall, FR-PA and Ca-Alg improve the thermal stability of the composite paper in different temperature regions under air atmosphere. Ca-Alg reduces the formation of aromatic products and NH3 in the composite paper under N2 atmosphere. Ca-Alg-based paper with excellent flame retardancy was successfully prepared.
| S-EPMC7866267 | biostudies-literature
Project description:In this study, a novel flame retardant (PMrG) was developed by self-assembling melamine and phytic acid (PA) onto rGO, and then applying it to the improvement of the flame resistance of PLA. PMrG simultaneously decreases the peak heat release rate (pHRR) and the total heat release (THR) of the composite during combustion, and enhances the LOI value and the time to ignition (TTI), thus significantly improving the flame retardancy of the composite. The flame retardant mechanism of the PMrG is also investigated. On one hand, the dehydration of PA and the decomposition of melamine in PMrG generate non-flammable volatiles, such as H2O and NH3, which dilute the oxygen concentration around the combustion front of the composite. On the other hand, the rGO, melamine, and PA components in PMrG create a synergistic effect in promoting the formation of a compact char layer during the combustion, which plays a barrier role and effectively suppresses the release of heat and smoke. In addition, the PMrGs in PLA exert a positive effect on the crystallization of the PLA matrix, thus playing the role of nucleation agent.
| S-EPMC8659536 | biostudies-literature
Project description:A novel intumescent flame retardant (IFR) agent designated as Dohor-6000A has been used to prepare halogen-free flame retardant polypropylene (PP) fibers via melting spinning. Before being blended with PP resin, a surface modification of Dohor-6000A was carried out to improve its compatibility with the PP matrix. The rheological behavior of flame retardant Dohor-6000A/PP resin, the structure, morphology, mechanical properties, flammability of the Dohor-6000A/PP fibers were studied in detail, as well as the action mode of flame retardant. X-ray diffraction (XRD) showed that the addition of Dohor-6000A did not damage the crystal as well as the orientation structure of PP matrix, which was helpful to the maintenance of mechanical properties. The presence of the IFR significantly improved the flame retardant performance and thermal stability of PP fibers. When the content of Dohor-6000A reached 25%, the fibers displayed a limiting oxygen index (LOI) value of 29.1% and good melt-drop resistance. Moreover, the peak heat release rate (PHRR) and total heat release (THR) from microscale combustion colorimetry (MCC) tests were decreased by 26.0% and 16.0% in comparison with the same conditions for pure PP fibers. In the condensed phase, the IFR promoted a carbonization process and promoted the formation of a glassy or stable foam protective layer on the surface of the polymer matrix. In addition, the IFR decomposed endothermically to release of non-combustible gases such as NH3 and CO2 which dilutes the combustible gases in the combustion zone.
| S-EPMC8347993 | biostudies-literature
Project description:In this study, a nitrogen-phosphorus intumescent flame-retardant 3-(N-diphenyl phosphate) amino propyl triethoxy silane (DPES), the ionic liquid (IL) of 1-butyl-3-methyl-imidazole phosphate, and a phosphorous-containing ionic liquid-modified expandable graphite (IL-EG), were synthesized, and their molecular structures were characterized. The flame-retardant rigid polyurethane foams (RPUFs) were compounded with synergistic flame-retardant IL-EG/DPES to study the effects of the combination IL-EG and DPES on the pore structure, mechanical properties, thermal decomposition behavior and thermal decomposition mechanism of RPUF. The results showed that IL-EG/DPES had good thermal stability, and an excellent expansibility and char yield. The flame-retardant RPUF, modified with IL-EG and DPES at the ratio of 1:1, had a relatively uniform pore size, the highest compressive strength, and an excellent flame-retardant performance due to the form interwoven hydrogen bonds between IL-EG and DPES, as well as the new synergistic flame-retardant coating on the RPUF surface to restrict the transfer of gas or heat into the PU matrix.
| S-EPMC7411720 | biostudies-literature
Project description:This work explores the strategy of incorporating a highly substituted reactive flame retardant into a benzoxazine moiety. For this purpose, a DOPO-based flame retardant received a chain extension via reaction with ethylene carbonate. It was then reacted with phloretic acid to obtain a diphenol end-capped molecule, and further reacted with furfurylamine and paraformaldehyde to obtain a benzoxazine monomer via a Mannich-like ring closure reaction. This four-step synthesis yielded a partly bio-based halogen-free flame retardant benzoxazine monomer (DOPO-PA-fa). The successful synthesis was proven via NMR, IR and MS analysis. The polymerization behavior was monitored by DSC and rheological analysis both showing the polymerization starts at 200 °C to yield pDOPO-PA-fa. pDOPO-PA-fa has a significant thermal stability with a residual mass of 30% at 800 °C under ambient atmosphere. Furthermore, it reached a V-0 rating against small flames and an OI of 35%. Blended with other benzoxazines, it significantly improves their thermal stability and fire resistance. It emphasizes its potential as flame retardant agent.
| S-EPMC8707438 | biostudies-literature
Project description:Gymnastics training facilities contain large volumes of polyurethane foam, a material that often contains additive flame retardants such as PentaBDE. While investigations of human exposure to flame retardants have focused on the general population, potentially higher than background exposures may occur in gymnasts and certain occupational groups. Our objectives were to compare PentaBDE body burden among gymnasts to the general United States population and characterize flame retardants levels in gym equipment, air, and dust. We recruited 11 collegiate female gymnasts (ages 18-22) from one gym in the eastern United States. The geometric mean (GM) concentration of BDE-153 in gymnast sera (32.5 ng/g lipid) was 4-6.5 times higher than in the general United States population groups. Median concentrations of PentaBDE, TBB, and TBPH in paired handwipe samples were 2-3 times higher after practice compared to before, indicating the gymnasts contacted these flame retardants during practice. GM concentrations of PentaBDE, TBB, and TBPH were 1-3 orders of magnitude higher in gym air and dust than in residences. Our findings suggest that these collegiate gymnasts experienced higher exposures to PentaBDE flame retardants compared to the general United States population and that gymnasts may also have increased exposure to other additive flame retardants used in polyurethane foam such as TBB and TBPH.
| S-EPMC3885979 | biostudies-literature
Project description:Tannic acid (TA) is a natural phenolic compound abundant in plants. Its characteristics of low combustion and good absorption make it useful in the flame retardant field. On this basis, a new expansive flame retardant system (ACT) composed of ammonium polyphosphate (APP)/TA functional clay (CT) was used to study the synergistic flame retardancy and smoke suppression of natural rubber (NR). Because of their unique flame retardancy and better mechanical properties compared with the traditional expansive flame retardant system (IFR), new flame retardants have attracted much attention in various fields. The results of the cone calorimeter showed that the ACT system can significantly influence the decomposition behavior of NR and form a highly graphitized and phosphorous carbon layer to protect the composite material, thus a synergistic effect is produced on the flame retardancy and smoke suppression performance of the composite material. In addition, within the effective additive quality range of the ACT system, TC can give the NR composite excellent mechanical properties.
| S-EPMC9580520 | biostudies-literature
Project description:Biological molecules can be obtained from natural sources or from commercial waste streams and can serve as effective feedstocks for a wide range of polymer products. From foams to epoxies and composites to bulk plastics, biomolecules show processability, thermal stability, and mechanical adaptations to fulfill current material requirements. This paper summarizes the known bio-sourced (or bio-derived), environmentally safe, thermo-oxidative, and flame retardant (BEST-FR) additives from animal tissues, plant fibers, food waste, and other natural resources. The flammability, flame retardance, and-where available-effects on polymer matrix's mechanical properties of these materials will be presented. Their method of incorporation into the matrix, and the matrices for which the BEST-FR should be applicable will also be made known if reported. Lastly, a review on terminology and testing methodology is provided with comments on future developments in the field.
| S-EPMC7240707 | biostudies-literature