Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental Investigations on the Pull-Out Behavior of Tire Strips Reinforced Sands.

ABSTRACT: Waste tires have excellent mechanical performance and have been used as reinforcing material in geotechnical engineering; however, their interface properties are poorly understood. To further our knowledge, this paper examines the pull-out characteristics of waste tire strips in a compacted sand, together with uniaxial and biaxial geogrids also tested under the same conditions. The analysis of the results shows that the interlocking effect and pull-out resistance between the tire strip and the sand is very strong and significantly higher than that of the geogrids. In the early stages of the pull-out test, the resistance is mainly provided by the front portion of the embedded tire strips, as the pull-out test continues, more and more of the areas towards the end of the tire strips are mobilized, showing a progressive failure mechanism. The deformations are proportional to the frictional resistance between the tire-sand interface, and increase as the normal stresses increase. Tire strips of different wear intensities were tested and presented different pull-out resistances; however, the pull-out resistance mobilization patterns were generally similar. The pull-out resistance values obtained show that rubber reinforcement can provide much higher pull-out forces than the geogrid reinforcements tested here, showing that waste tires are an excellent alternative as a reinforcing system, regardless of the environmental advantages.

SUBMITTER: Li LH

PROVIDER: S-EPMC5551750 | biostudies-other | 2017 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Leaching of Carbon Reinforced Concrete-Part 1: Experimental Investigations.

Project description:The composite material 'carbon concrete composite (C3)' is currently capturing the building sector as an 'innovative' and 'sustainable' alternative to steel reinforced concrete. In this work, its environmental compatibility was investigated. The focus of this research was the leaching behavior of C3, especially for the application as irrigated façade elements. Laboratory and outdoor exposure tests were run to determine and assess the heavy metal and trace element emissions. In the wake of this work, the validity of laboratory experiments and the transferability to outdoor behavior were investigated. The experimental results show very low releases of environmental harmful substances from carbon concrete composite. Most heavy metal concentrations were in the range of <0.1-8 µg/L, and higher concentrations (up to 32 µg/L) were found for barium, chromium, and copper. Vanadium and zinc concentrations were in the range of 0.1-60 µg/L, boron and nickel concentrations were clearly exceeding 100 µg/L. Most of the high concentrations were found to be a result of the rainfall background concentrations. The material C3 is therefore considered to be environmentally friendly. There is no general correlation between laboratory leaching data and outdoor emissions. The results depend on the examined substance and used method. The prediction and evaluation of the leaching of building elements submitted to rain is therefore challenging. This topic is debated in the second part of this publication.

| S-EPMC7579653 | biostudies-literature

Experimental Study of Flexural Behavior of Reinforced Concrete Beam Strengthened with Prestressed Textile-Reinforced Mortar.

Project description:In this study, nine specimens were experimentally tested to analyze the strengthening efficiency of textile-reinforced mortar (TRM) and the difference in flexural behavior between prestressed and non-prestressed TRM-strengthened reinforced concrete beam. The test results show that TRM strengthening improves the flexural strength of TRM-strengthened reinforced concrete beams with alkali-resistant-(AR-) glass textile as well as that with carbon textile. However, in the case of textile prestressing, the strengthening efficiency for flexural strength of the AR-glass textile was higher than that of the carbon textile. The flexural stiffness of AR-glass textiles increased when prestressing was introduced and the use of carbon textiles can be advantageous to reduce the decreasing ratio of flexural stiffness as the load increased. In the failure mode, textile prestressing prevents the damage of textiles effectively owing to the crack and induces the debonding of the TRM.

| S-EPMC7084956 | biostudies-literature

Pull-Out Strength and Bond Behavior of Prestressing Strands in Prestressed Self-Consolidating Concrete.

Project description:With the extensive use of self-consolidating concrete (SCC) worldwide, it is important to ensure that such concrete can secure uniform in-situ mechanical properties that are similar to those obtained with properly consolidated concrete of conventional fluidity. Ensuring proper stability of SCC is essential to enhance the uniformity of in-situ mechanical properties, including bond to embedded reinforcement, which is critical for structural engineers considering the specification of SCC for prestressed applications. In this investigation, Six wall elements measuring 1540 mm × 2150 mm × 200 mm were cast using five SCC mixtures and one reference high-performance concrete (HPC) of normal consistency to evaluate the uniformity of bond strength between prestressing strands and concrete as well as the distribution of compressive strength obtained from cores along wall elements. The evaluated SCC mixtures used for casting wall elements were proportioned to achieve a slump flow consistency of 680 ± 15 mm and minimum caisson filling capacity of 80%, and visual stability index of 0.5 to 1. Given the spreads in viscosity and static stability of the SCC mixtures, the five wall elements exhibited different levels of homogeneity in in-situ compressive strength and pull-out bond strength. Test results also indicate that despite the high fluidity of SCC, stable concrete can lead to more homogenous in-situ properties than HPC of normal consistency subjected to mechanical vibration.

| S-EPMC5456012 | biostudies-other

Dataset on the cyclic experimental behavior of Steel frames with Reinforced Concrete infill Walls.

Project description:This paper presents the experimental data on the cyclic behavior of Steel frames with Reinforced Concrete infill Walls (SRCW). Two specimens, characterized by a different shear studs distribution, have been tested: the first one is provided with shear studs positioned only in the four corners of the steel frame; the second one presents shear studs all distributed along the perimeter of the steel frame except for the zone of the dissipative fuses. The overall setup, loading protocol, collapse mechanisms, force-displacement curves for both the whole system and the main single components are described for the two tested prototypes.

| S-EPMC6141444 | biostudies-literature

Behavior out of control: Experimental evolution of resistance to host manipulation.

Project description:Many parasites alter their host's phenotype in a manner that enhances their own fitness beyond the benefits they would gain from normal exploitation. Such host manipulation is rarely consistent with the host's best interests resulting in suboptimal and often fatal behavior from the host's perspective. In this case, hosts should evolve resistance to host manipulation. The cestode Schistocephalus solidus manipulates the behavior of its first intermediate copepod host to reduce its predation susceptibility and avoid fatal premature predation before the parasite is ready for transmission to its subsequent host. Thereafter, S. solidus increases host activity to facilitate transmission. If successful, this host manipulation is necessarily fatal for the host. I selected the copepod Macrocyclops albidus, a first intermediate host of S. solidus, for resistance or susceptibility to host manipulation to investigate their evolvability. Selection on the host indeed increased host manipulation in susceptible and reduced host manipulation in resistant selection lines. Interestingly, this seemed to be at least partly due to changes in the baseline levels of the modified trait (activity) rather than actual changes in resistance or susceptibility to host manipulation. Hence, hosts seem restricted in how rapidly and efficiently they can evolve resistance to host manipulation.

| S-EPMC6662552 | biostudies-literature

Experimental field evidence that out-group threats influence within-group behavior.

Project description:In social species, conspecific outsiders present various threats to groups and their members. These out-group threats are predicted to affect subsequent within-group interactions (e.g., affiliation and aggression) and individual behavior (e.g., foraging and vigilance decisions). However, experimental investigations of such consequences are rare, especially in natural conditions. We used field-based call playbacks and fecal presentations on habituated wild dwarf mongooses (Helogale parvula)-a cooperatively breeding, territorial species-to examine postinteraction responses to the simulated threat of a rival group. Dwarf mongooses invested more in grooming of groupmates, foraged closer together, and more regularly acted as sentinels (a raised guard) after encountering indicators of rival-group presence compared to control conditions. These behavioral changes likely arise from greater anxiety and, in the case of increased vigilance, the need to seek additional information about the threat. The influence of an out-group threat lasted at least 1 h but individuals of different dominance status and sex responded similarly, potentially because all group members suffer costs if a contest with rivals is lost. Our results provide field-based experimental evidence from wild animals that out-group threats can influence within-group behavior and decision making, and suggest the need for greater consideration of the lasting impacts of social conflict.

| S-EPMC6765380 | biostudies-literature

Experimental data of the static behavior of reinforced concrete beams at room and low temperature.

Project description:This article provides data on the static behavior of reinforced concrete at room and low temperature including, strength, ductility, and crack widths of the reinforced concrete. The experimental data on the application of digital image correlation (DIC) or particle image velocimetry (PIV) in measuring crack widths and the accuracy and precision of DIC/PIV method with temperature variations when is used for measuring strains is provided as well.

| S-EPMC4845156 | biostudies-literature

When VSEPR fails: experimental and theoretical investigations of the behavior of alkaline-earth-metal acetylides.

Project description:The synthesis, structural, and spectral characterization as well as a theoretical study of a family of alkaline-earth-metal acetylides provides insights into synthetic access and the structural and bonding characteristics of this group of highly reactive compounds. Based on our earlier communication that reported unusual geometry for a family of triphenylsilyl-substituted alkaline-earth-metal acetylides, we herein present our studies on an expanded family of target derivatives, providing experimental and theoretical data to offer new insights into the intensively debated theme of structural chemistry in heavy alkaline-earth-metal chemistry.

| S-EPMC4019021 | biostudies-literature

Experimental and Numerical Investigation of Flow and Alignment Behavior of Waste Tire-Derived Graphene Nanoplatelets in PA66 Matrix during Melt-Mixing and Injection.

Project description:Homogeneous dispersion of graphene into thermoplastic polymer matrices during melt-mixing is still challenging due to its agglomeration and weak interfacial interactions with the selected polymer matrix. In this study, an ideal dispersion of graphene within the PA66 matrix was achieved under high shear rates by thermokinetic mixing. The flow direction of graphene was monitored by the developed numerical methodology with a combination of its rheological behaviors. Graphene nanoplatelets (GNP) produced from waste-tire by upcycling and recycling techniques having high oxygen surface functional groups were used to increase the compatibility with PA66 chains. This study revealed that GNP addition increased the crystallization temperature of nanocomposites since it acted as both a nucleating and reinforcing agent. Tensile strength and modulus of PA66 nanocomposites were improved at 30% and 42%, respectively, by the addition of 0.3 wt% GNP. Flexural strength and modulus were reached at 20% and 43%, respectively. In addition, the flow model, which simulates the injection molding process of PA66 resin with different GNP loadings considering the rheological behavior and alignment characteristics of GNP, served as a tool to describe the mechanical performance of these developed GNP based nanocomposites.

| S-EPMC8003376 | biostudies-literature

Additive manufactured push-fit implant fixation with screw-strength pull out.

Project description:Additive manufacturing offers exciting new possibilities for improving long-term metallic implant fixation in bone through enabling open porous structures for bony ingrowth. The aim of this research was to investigate how the technology could also improve initial fixation, a precursor to successful long-term fixation. A new barbed fixation mechanism, relying on flexible struts was proposed and manufactured as a push-fit peg. The technology was optimized using a synthetic bone model and compared with conventional press-fit peg controls tested over a range of interference fits. Optimum designs, achieving maximum pull-out force, were subsequently tested in a cadaveric femoral condyle model. The barbed fixation surface provided more than double the pull-out force for less than a third of the insertion force compared to the best performing conventional press-fit peg (p?<?0.001). Indeed, it provided screw-strength pull out from a push-fit device (1,124?±?146?N). This step change in implant fixation potential offers new capabilities for low profile, minimally invasive implant design, while providing new options to simplify surgery, allowing for one-piece push-fit components with high levels of initial stability. © 2017 The Authors. Journal of Orthopaedic Research® Published by Wiley Periodicals, Inc. on behalf of the Orthopaedic Research Society. J Orthop Res 36:1508-1518, 2018.

| S-EPMC6175131 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data