Dataset Information

Investigation of Molecular Structure and Thermal Properties of Thermo-Oxidative Aged SBS in Blends and Their Relations.

ABSTRACT: Tri-block copolymer styrene-butadiene (SBS) is extensively applied in bituminous highway construction due to its high elasticity and excellent weather resistance. With the extension of time, tri-block structural SBS automatically degrades into bi-block structural SB- with some terminal oxygen-containing groups under the comprehensive effects of light, heat, oxygen, etc. In this paper, the effects of aging temperature, aging time and oxygen concentration on the molecular structure of thermo-oxidative aged SBS were mainly investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), and the correlation between oxygen-containing groups and thermal properties (TG-DTG) was further discussed. The FTIR and XPS results show that rapid decomposition of SBS will occur with increments of aging temperature, aging time and oxygen concentration, and a large number of oxygen-containing groups such as -OH, C=O, -COOH, etc. will be formed during thermo-oxidative aging. In short-term aging, changes in aging temperature and oxygen concentration have a significant impact on the structural damage of SBS. However, in long-term aging, it has no further effect on the molecular structure of SBS or on increasing oxygen concentration. The TG and DTG results indicate that the concentration of substances with low molecular weight gradually increases with the improvement of the degree of aging of the SBS, while the initial decomposition rate increases at the beginning of thermal weightlessness and the decomposition rate slows down in comparison with neat SBS. From the relation between the XPS and TG results, it can be seen that the initial thermal stability of SBS rapidly reduces as the relative concentration of the oxygen-containing groups accumulates around 3%, while the maximum decomposition temperature slowly decreases when the relative concentration of the oxygen-containing groups is more than 3%, due to the difficult damage to strong bonds on the molecular structure of aged SBS.

SUBMITTER: Xu X

PROVIDER: S-EPMC5551811 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:The aim of the current study was to evaluate the effect of different thermal manipulation (TM) protocols during embryogenesis on thermotolerance acquisition parameters during subsequent thermal challenge (TC) at posthatch day 28. A total of 1500 fertile chicken eggs were divided randomly into five treatments (300 eggs each): control was maintained at 37.8 °C and 56 % relative humidity (RH) whereas, TM1, TM2, TM3 and TM4 were subjected to 38.5, 39, 39.5 and 40 °C for 18 h and 65 % RH daily during embryonic days ED 12-18. Hatched chicks from each treatment group allocated randomly into two sub-treatment groups (thermo-neutral, naïve (TN) and thermal challenge (TC). At day 28 of age, chicks subjected to TC by adjusting room temperature to 42 °C for 6 h while naïve chicks kept under regular conditions (22 ± 1 °C and 50-60 % RH). Chick's response to TC evaluated by determination of plasma T3, T4, corticosterone, total proteins, albumin, selected enzymes and some electrolytes at the beginning (0 h) and after 1, 3 and 5 h of TC in TM and TN chicks. Furthermore, pectoral and thigh muscles mRNA expression of Atrogin-1, CK, avUCP, DIO3, DIO2 were evaluated in TC and TN sub-treatment groups.TM induced a significant reduction in free T3 and elevation in total proteins and albumin in plasma with significant down-regulation of Atrogin-1 and DIO2 and significant up-regulation of DIO3 mRNA expression in muscle of TM chicks compare to control. During TC at day 28, decrease in the concentrations of plasma free T3, total proteins and albumin with increase in T4 have been detected in control and TM chicks. TC induced up-regulation of Atrogin-1 and DIO3 with down-regulation of DIO2 gene expression in muscles of all TC chicks.The present study indicated that, TM improved thermotolerance acquisition by decreasing basal metabolic rate and muscle injury during thermal stress. Basal metabolic rate decreased via reduction of plasma T3 concentration with up and down regulation of expression of DIO3 and DIO2, respectively in muscles. Muscle injury protected by stimulation of protein biosynthesis and down-regulation of Atrogin-1 expression.

Project description:A recently developed cellulose hybrid chemical treatment consists of two steps: solvent exchange (with ethanol or hexane) and chemical grafting of maleic anhydride (MA) on the surface of fibers. It induces a significant decrease in cellulose moisture content and causes some changes in the thermal resistance of analyzed blend samples, as well as surface properties. The thermal characteristics of ethylene-norbornene copolymer (TOPAS) blends filled with hybrid chemically modified cellulose fibers (UFC100) have been widely described on the basis of differential scanning calorimetry and thermogravimetric analysis. Higher thermal stability is observed for the materials filled with the fibers which were dried before any of the treatments carried out. Dried cellulose filled samples start to degrade at approximately 330 °C while undried UFC100 specimens begin to degrade around 320 °C. Interestingly, the most elevated thermal resistance was detected for samples filled with cellulose altered only with solvents (both ethanol and hexane). In order to support the supposed thermal resistance trends of prepared blend materials, apparent activation energies assigned to cellulose degradation (EA1) and polymer matrix decomposition (EA2) have been calculated and presented in the article. It may be evidenced that apparent activation energies assigned to the first decomposition step are higher in case of the systems filled with UFC100 dried prior to the modification process. Moreover, the results have been enriched using surface free energy analysis of the polymer blends. The surface free energy polar part (Ep) raises considering samples filled with not dried UFC100. On the other hand, when cellulose fibers are dried prior to the modification process, then the blend sample's dispersive part of surface free energy is increased with respect to that containing unmodified fiber. As polymer blend Ep exhibits higher values reflecting enhanced material degradation potential, the cellulose fibers employment leads to more eco-friendly production and responsible waste management. This is in accordance with the rules of sustainable development.

Dataset Information

Investigation of Molecular Structure and Thermal Properties of Thermo-Oxidative Aged SBS in Blends and Their Relations.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets