Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Theoretical Investigations of Si-Ge Alloys in P4₂/ncm Phase: First-Principles Calculations.

ABSTRACT: The structural, mechanical, anisotropic, electronic and thermal properties of Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase are investigated in this work. The calculations have been performed with an ultra-soft pseudopotential by using the generalized gradient approximation and local density approximation in the framework of density functional theory. The achieved results for the lattice constants and band gaps of P4₂/ncm-Si and P4₂/ncm-Ge in this research have good accordance with other results. The calculated elastic constants and elastic moduli of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase are better than that of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/mnm phase. The Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase exhibit varying degrees of mechanical anisotropic properties in Poisson's ratio, shear modulus, Young's modulus, and universal anisotropic index. The band structures of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase show that they are all indirect band gap semiconductors with band gap of 1.46 eV, 1.25 eV, 1.36 eV and 1.00 eV, respectively. In addition, we also found that the minimum thermal conductivity κmin of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase exhibit different degrees of anisotropic properties in (001), (010), (100) and (01¯0) planes.

SUBMITTER: Ma Z

PROVIDER: S-EPMC5553416 | biostudies-other | 2017 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

First-principles calculations of the epsilon phase of solid oxygen.

Project description:The crystal, electronic and magnetic structures of solid oxygen in the epsilon phase have been investigated using the strongly constrained appropriately normed (SCAN) + rVV10 method and the generalized gradient approximation (GGA) + vdW-D + U method. The spin-polarized SCAN + rVV10 method with an 8-atom primitive unit cell provides lattice parameters consistent with the experimental results over the entire pressure range, including the epsilon-zeta structural phase transition at high pressure, but does not provide accurate values of the intermolecular distances d1 and d2 at low pressure. The agreement between the intermolecular distances and the experimental values is greatly improved when a 16-atom conventional unit cell is used. Therefore, the SCAN + rVV10 method with a 16-atom unit cell can be considered the most suitable model for the epsilon phase of solid oxygen. The spin-polarized SCAN + rVV10 model predicts a magnetic phase at low pressure. Since the lattice parameters of the predicted magnetic structure are consistent with the experimental lattice parameters measured at room temperature, our results may suggest that the epsilon phase is magnetic even at room temperature. The GGA + vdW-D + U (with an ad hoc value of Ueff = 2 eV at low pressure instead of the first-principles value of Ulreff ~ 9 eV) and hybrid functional methods provide similar results to the SCAN + rVV10 method; however, they do not provide reasonable values for the intermolecular distances.

| S-EPMC6584638 | biostudies-literature

Electronegativity and doping in Si1-xGex alloys.

Project description:Silicon germanium alloys are technologically important in microelectronics but also they are an important paradigm and model system to study the intricacies of the defect processes on random alloys. The key in semiconductors is that dopants and defects can tune their electronic properties and although their impact is well established in elemental semiconductors such as silicon they are not well characterized in random semiconductor alloys such as silicon germanium. In particular the impact of electronegativity of the local environment on the electronic properties of the dopant atom needs to be clarified. Here we employ density functional theory in conjunction with special quasirandom structures model to show that the Bader charge of the dopant atoms is strongly dependent upon the nearest neighbor environment. This in turn implies that the dopants will behave differently is silicon-rich and germanium-rich regions of the silicon germanium alloy.

| S-EPMC7198609 | biostudies-literature

A New Superhard Phase and Physical Properties of ZrB₃ from First-Principles Calculations.

Project description:Using the first-principles particle swarm optimization algorithm for crystal structural prediction, we have predicted a novel monoclinic C2/m structure for ZrB₃, which is more energetically favorable than the previously proposed FeB₃-, TcP₃-, MoB₃-, WB₃-, and OsB₃-type structures in the considered pressure range. The new phase is mechanically and dynamically stable, as confirmed by the calculations of its elastic constants and phonon dispersion curve. The calculated large shear modulus (227 GPa) and high hardness (42.2 GPa) show that ZrB₃ within the monoclinic phase is a potentially superhard material. The analyses of the electronic density of states and chemical bonding reveal that the strong B-B and B-Zr covalent bonds are attributed to its high hardness. By the quasi-harmonic Debye model, the heat capacity, thermal expansion coefficient and Grüneisen parameter of ZrB₃ are also systemically investigated.

| S-EPMC5512525 | biostudies-other

Semiconducting Chalcogenide Alloys Based on the (Ge, Sn, Pb) (S, Se, Te) Formula with Outstanding Properties: A First-Principles Calculation Study.

Project description:Very recently, a new class of the multicationic and -anionic entropy-stabilized chalcogenide alloys based on the (Ge, Sn, Pb) (S, Se, Te) formula has been successfully fabricated and characterized experimentally [Zihao Deng et al., Chem. Mater. 32, 6070 (2020)]. Motivated by the recent experiment, herein, we perform density functional theory-based first-principles calculations in order to investigate the structural, mechanical, electronic, optical, and thermoelectric properties. The calculations of the cohesive energy and elasticity parameters indicate that the alloy is stable. Also, the mechanical study shows that the alloy has a brittle nature. The GeSnPbSSeTe alloy is a semiconductor with a direct band gap of 0.4 eV (0.3 eV using spin-orbit coupling effect). The optical analysis illustrates that the first peak of Im(ε) for the GeSnPbSSeTe alloy along all polarization directions is located in the visible range of the spectrum which renders it a promising material for applications in optical and electronic devices. Interestingly, we find an optically anisotropic character of this system which is highly desirable for the design of polarization-sensitive photodetectors. We have accurately predicted the thermoelectric coefficients and have calculated a large power factor value of 3.7 × 1011 W m-1 K-2 s-1 for p-type. The high p-type power factor is originated from the multiple valleys near the valence band maxima. The anisotropic results of the optical and transport properties are related to the specific tetragonal alloy unit cell.

| S-EPMC8047724 | biostudies-literature

First-principles calculations of inorganic metallocene nanowires.

Project description:Inspired by the recently synthesized inorganic metallocene derivatives Fe(P4)22-, we have identified four stable inorganic metallocene nanowires, MP4 (M = Sc, Ti, Cr and Fe) in configurations of either regular quadrangular prism (Q-type) or anticube (A-type), and further investigated their magnetic and electronic characteristics utilizing the first-principles calculation. It shows that CrP4 is a ferromagnetic metal, while other nanowires are semiconducting antiferromagnets with bandgaps of 0.44, 1.88, and 2.29 eV within the HSE06 level. It also shows that both ScP4 and TiP4 can be stabilized in the Q-type and A-type, corresponding to the antiferromagnetic and ferromagnetic ground states, respectively, indicating a configuration-dependent magnetism. The thermodynamic and lattice stabilities are confirmed by the ab initio molecular dynamics and phonon spectra. This study has unmasked the structural and physical properties of novel inorganic metallocene nanowires, and revealed their potential application in spintronics.

| S-EPMC10825901 | biostudies-literature

First-principles calculations on dislocations in MgO.

Project description:While ceramic materials are widely used in our society, their understanding of the plasticity is not fully understood. MgO is one of the prototypical ceramics, extensively investigated experimentally and theoretically. However, there is still controversy over whether edge or screw dislocations glide more easily. In this study, we directly model the atomic structures of the dislocation cores in MgO based on the first-principles calculations and estimate the Peierls stresses. Our results reveal that the screw dislocation on the primary slip system exhibits a smaller Peierls stress than the edge dislocation. The tendency is not consistent with metals, but rather with TiN, suggesting a characteristic inherent to rock-salt type materials.

| S-EPMC11370692 | biostudies-literature

New Zirconium Diboride Polymorphs-First-Principles Calculations.

Project description:Two new hypothetical zirconium diboride (ZrB 2 ) polymorphs: (hP6-P6 3 /mmc-space group, no. 194) and (oP6-Pmmn-space group, no. 59), were thoroughly studied under the first-principles density functional theory calculations from the structural, mechanical and thermodynamic properties point of view. The proposed phases are thermodynamically stable (negative formation enthalpy). Studies of mechanical properties indicate that new polymorphs are less hard than the known phase (hP3-P6/mmm-space group, no. 191) and are not brittle. Analysis of phonon band structure and density of states (DOS) also show that the phonon modes have positive frequencies everywhere and the new ZrB 2 phases are not only mechanically but also dynamically stable. The estimated acoustic Debye temperature, Θ D , for the two new proposed ZrB 2 phases is about 760 K. The thermodynamic properties such as internal energy, free energy, entropy and constant-volume specific heat are also presented.

| S-EPMC7372453 | biostudies-literature

Phase stability of the nanolaminates V2Ga2C and (Mo1-xVx)2Ga2C from first-principles calculations.

Project description:We here use first-principles calculations to investigate the phase stability of the hypothetical laminated material V2Ga2C and the related alloy (Mo1-xVx)2Ga2C, the latter for a potential parent material for synthesis of (Mo1-xVx)2C, a new two-dimensional material in the family of so called MXenes. We predict that V2Ga2C is thermodynamically stable with respect to all identified competing phases in the ternary V-Ga-C phase diagram. We further calculate the stability of ordered and disordered configurations of Mo and V in (Mo1-xVx)2Ga2C and predict that ordered (Mo1-xVx)2Ga2C for x? 0.25 is stable, with an order-disorder transition temperature of ?1000 K. Furthermore, (Mo1-xVx)2Ga2C for x = 0.5 and x? 0.75 is suggested to be stable, but only for disordered Mo-V configurations, and only at elevated temperatures. We have also investigated the electronic and elastic properties of V2Ga2C; the calculated bulk, shear, and Young's modulus are 141, 94, and 230 GPa, respectively.

| S-EPMC5066482 | biostudies-literature

First principles-based design of lightweight high entropy alloys.

Project description:Recently, the design of lightweight high entropy alloys (HEAs) with a mass density lower than 5 g/cm3 has attracted much research interest in structural materials. We applied a first principles-based high-throughput method to design lightweight HEAs in single solid-solution phase. Three lightweight quinary HEA families were studied: AlBeMgTiLi, AlBeMgTiSi and AlBeMgTiCu. By comprehensively exploring their entire compositional spaces, we identified the most promising compositions according to the following design criteria: the highest stability, lowest mass density, largest elastic modulus and specific stiffness, along with highest Pugh's ratio. We found that HEAs with the topmost compositions exhibit a negative formation energy, a low density and high specific Young's modulus, but a low Pugh's ratio. Importantly, we show that the most stable composition, Al0.31Be0.15Mg0.14Ti0.05Si0.35 is energetically more stable than its metallic compounds and it significantly outperforms the current lightweight engineering alloys such as the 7075 Al alloy. These results suggest that the designed lightweight HEAs can be energetically more stable, lighter, and stiffer but slightly less ductile compared to existing Al alloys. Similar conclusions can be also drawn for the AlBeMgTiLi and AlBeMgTiCu. Our design methodology and findings serve as a valuable tool and guidance for the experimental development of lightweight HEAs.

| S-EPMC10728166 | biostudies-literature

Unraveling the Phase Stability and Physical Property of Modulated Martensite in Ni2Mn1.5In0.5 Alloys by First-Principles Calculations.

Project description:Large magnetic field-induced strains can be achieved in modulated martensite for Ni-Mn-In alloys; however, the metastability of the modulated martensite imposes serious constraints on the ability of these alloys to serve as promising sensor and actuator materials. The phase stability, magnetic properties, and electronic structure of the modulated martensite in the Ni2Mn1.5In0.5 alloy are systematically investigated. Results show that the 6M and 5M martensites are metastable and will eventually transform to the NM martensite with the lowest total energy in the Ni2Mn1.5In0.5 alloy. The physical properties of the incommensurate 7M modulated martensite (7M-IC) and nanotwinned 7M martensite (7M-(52¯)2) are also calculated. The austenite (A) and 7M-(52¯)2 phases are ferromagnetic (FM), whereas the 5M, 6M, and NM martensites are ferrimagnetic (FIM), and the FM coexists with the FIM state in the 7M-IC martensite. The calculated electronic structure demonstrates that the splitting of Jahn-Teller effect and the strong Ni-Mn bonding interaction lead to the enhancement of structural stability.

| S-EPMC9182368 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data