Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electronegativity and doping in Si1-xGex alloys.

ABSTRACT: Silicon germanium alloys are technologically important in microelectronics but also they are an important paradigm and model system to study the intricacies of the defect processes on random alloys. The key in semiconductors is that dopants and defects can tune their electronic properties and although their impact is well established in elemental semiconductors such as silicon they are not well characterized in random semiconductor alloys such as silicon germanium. In particular the impact of electronegativity of the local environment on the electronic properties of the dopant atom needs to be clarified. Here we employ density functional theory in conjunction with special quasirandom structures model to show that the Bader charge of the dopant atoms is strongly dependent upon the nearest neighbor environment. This in turn implies that the dopants will behave differently is silicon-rich and germanium-rich regions of the silicon germanium alloy.

SUBMITTER: Christopoulos SG

PROVIDER: S-EPMC7198609 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Electronegativity and doping in Si1-xGex alloys.

Christopoulos Stavros-Richard G SG Kuganathan Navaratnarajah N Chroneos Alexander A

Scientific reports 20200504 1

Silicon germanium alloys are technologically important in microelectronics but also they are an important paradigm and model system to study the intricacies of the defect processes on random alloys. The key in semiconductors is that dopants and defects can tune their electronic properties and although their impact is well established in elemental semiconductors such as silicon they are not well characterized in random semiconductor alloys such as silicon germanium. In particular the impact of el ...[more]

PMID: 32366971

Similar Datasets

Composition and temperature dependence of self-diffusion in Si1-x Ge x alloys.

Project description:The knowledge of diffusion processes in semiconducting alloys is very important both technologically and from a theoretical point of view. Here we show that, self-diffusion in Si1-x Ge x alloys as a function of temperature and Ge concentration can be described by the cBΩ thermodynamic model. This model connects the activation Gibbs free energy of point defects formation and migration with the elastic and expansion properties of the bulk material. The approach allows the systematic investigation of point defect thermodynamic parameters such as activation enthalpy, activation entropy and activation volume, based on the thermo-elastic properties (bulk modulus and its derivatives, mean atomic volume and thermal expansion coefficient) of the two end-members of the Si1-x Ge x alloy. Considerable deviations from Vegard's law are observed, due to the diversification of the bulk properties of Si and Ge, in complete agreement with the available experimental data.

| S-EPMC5430970 | biostudies-literature

Reaction Mechanism and Performance of Innovative 2D Germanane-Silicane Alloys: SixGe1- xH Electrodes in Lithium-Ion Batteries.

Project description:The adjustable structures and remarkable physicochemical properties of 2D monoelemental materials, such as silicene and germanene, have attracted significant attention in recent years. They can be transformed into silicane (SiH) and germanane (GeH) through covalent functionalization via hydrogen atom termination. However, synthesizing these materials with a scalable and low-cost fabrication process to achieve high-quality 2D SiH and GeH poses challenges. Herein, groundbreaking 2D SiH and GeH materials with varying compositions, specifically Si0.25Ge0.75H, Si0.50Ge0.50H, and Si0.75Ge0.25H, are prepared through a simple and efficient chemical exfoliation of their Zintl phases. These 2D materials offer significant advantages, including their large surface area, high mechanical flexibility, rapid electron mobility, and defect-rich loose-layered structures. Among these compositions, the Si0.50Ge0.50H electrode demonstrates the highest discharge capacity, reaching up to 1059 mAh g-1 after 60 cycles at a current density of 75 mA g-1. A comprehensive ex-situ electrochemical analysis is conducted to investigate the reaction mechanisms of lithiation/delithiation in Si0.50Ge0.50H. Subsequently, an initial assessment of the c-Li15(SixGe1- x)4 phase after lithiation and the a-Si0.50Ge0.50 phase after delithiation is presented. Hence, this study contributes crucial insights into the (de)lithiation reaction mechanisms within germanane-silicane alloys. Such understanding is pivotal for mastering promising materials that amalgamate the finest properties of silicon and germanium.

| S-EPMC11199986 | biostudies-literature

Growth of Epitaxial ZnSnxGe1-xN2 Alloys by MBE.

Project description:ZnSnxGe1-xN2 alloys are chemically miscible semiconductor compounds with potential application as earth-abundant alternatives to InxGa1-xN. Preparation of ZnSnxGe1-xN2 thin-films by reactive RF sputter deposition yield low-mobility, nanocrystalline films. In contrast, the growth of ZnSnxGe1-xN2 films by molecular-beam epitaxy (MBE) on c-plane sapphire and GaN templates is described herein. Epitaxial films exhibited 3D growth on sapphire and 2D single-crystal quality on GaN, exhibiting substantial improvements in epitaxy and crystallinity relative to nanocrystalline sputtered films. Films on sapphire were n-type with electronic mobilities as high as 18?cm2?V-1 s-1, an order of magnitude greater than the 2?cm2?V-1 s-1 average mobility observed in this work for sputtered films. Mobility differences potentially arise from strain or surface effects originating from growth techniques, or from differences in film thicknesses. In general, MBE growth has provided desired improvements in electronic mobility, epitaxy, and crystal quality that provide encouragement for the continued study of ZnSnxGe1-xN2 alloys.

| S-EPMC5607306 | biostudies-literature

Si0.97Ge0.03 microelectronic thermoelectric generators with high power and voltage densities.

Project description:Microelectronic thermoelectric generators are one potential solution to energizing energy autonomous electronics, such as internet-of-things sensors, that must carry their own power source. However, thermoelectric generators with the mm2 footprint area necessary for on-chip integration made from high thermoelectric figure-of-merit materials have been unable to produce the voltage and power levels required to run Si electronics using common temperature differences. We present microelectronic thermoelectric generators using Si0.97Ge0.03, made by standard Si processing, with high voltage and power generation densities that are comparable to or better than generators using high figure-of-merit materials. These Si-based thermoelectric generators have <1 mm2 areas and can energize off-the-shelf sensor integrated circuits using temperature differences ≤25 K near room temperature. These generators can be directly integrated with Si circuits and scaled up in area to generate voltages and powers competitive with existing thermoelectric technologies, but in what should be a far more cost-effective manner.

| S-EPMC7458905 | biostudies-literature

Theoretical Investigations of Si-Ge Alloys in P4₂/ncm Phase: First-Principles Calculations.

Project description:The structural, mechanical, anisotropic, electronic and thermal properties of Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase are investigated in this work. The calculations have been performed with an ultra-soft pseudopotential by using the generalized gradient approximation and local density approximation in the framework of density functional theory. The achieved results for the lattice constants and band gaps of P4₂/ncm-Si and P4₂/ncm-Ge in this research have good accordance with other results. The calculated elastic constants and elastic moduli of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase are better than that of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/mnm phase. The Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase exhibit varying degrees of mechanical anisotropic properties in Poisson's ratio, shear modulus, Young's modulus, and universal anisotropic index. The band structures of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase show that they are all indirect band gap semiconductors with band gap of 1.46 eV, 1.25 eV, 1.36 eV and 1.00 eV, respectively. In addition, we also found that the minimum thermal conductivity κmin of the Si, Si0.667Ge0.333, Si0.333Ge0.667 and Ge in P4₂/ncm phase exhibit different degrees of anisotropic properties in (001), (010), (100) and (01¯0) planes.

| S-EPMC5553416 | biostudies-other

Thermophysical properties of a Si50Ge50 melt measured on board the International Space Station.

Project description:Thermophysical properties of highly doped Si50Ge50 melt were measured contactlessly in the electromagnetic levitation facility ISS-EML on board the International Space Station. The sample could be melted, overheated by about 375?K, and cooled down in 350?mbar Argon atmosphere. A large undercooling of about 240?K was observed and a quasi-homogeneous nucleation on the droplet surface occurred. During the cooling phase, high-resolution videos were taken from the side and the top. The density and thermal expansion were evaluated with digital image processing; the viscosity and the surface tension were measured by means of the oscillating drop technique. Inductive measurements of the electrical resistivity were conducted by a dedicated electronics. All data were taken as a function of temperature T from the overheated melt down to the undercooled range. We found a nonlinear thermal expansion, suggesting a many body effect in the liquid beyond the regular pair interaction, an enhanced damping of surface oscillations likely related to an internal turbulent flow, and an increment of the electrical resistivity with decreased T in the undercooled range regarding a demixing of the components.

| S-EPMC7096487 | biostudies-literature

Investigation of Boron Distribution at the SiO2/Si Interface of Monolayer Doping.

Project description:Monolayer doping is a possible method for achieving complex-geometry structures with different semiconductors. Understanding the dopant diffusion behavior of monolayer doping, especially under different heating sources, is essential for further improvement. We examine and compare the doping profile and dopant activation with two different heating sources (rapid thermal annealing and microwave annealing), especially focused on SiO2/Si interface. These heating sources are used for junction diode fabrication, to realize current switching behavior. Direct observations of monolayer doping profiles, especially inside the capping oxide, are discussed to provide quantitative information for dopant concentration. This can provide significant information for better tuning of surface chemistries and process protocols applied in monolayer doping methodologies.

| S-EPMC7807803 | biostudies-literature

Tetrel-Bond Interactions Involving Metallylenes TH2 (T = Si, Ge, Sn, Pb): Dual Binding Behavior.

Project description:The dual binding behavior of the metallylenes TH2 (T = Si, Ge, Sn, Pb) with some selected Lewis acids (T'H3F, T' = Si, Ge, Sn, Pb) and bases (N2, HCN, CO, and C6H6) has been investigated by using the high-level quantum chemical method. Two types (type-A and type-B) of tetrel-bonded complexes can be formed for TH2 due to their ambiphilic character. TH2 act as Lewis bases in type-A complexes, and they act as Lewis acids in type-B ones. CO exhibits two binding modes in the type-B complexes, one of which is TH2···CO and the other is TH2···OC. The TH2···OC complexes possess a weaker binding strength than the other type-B complexes. The TH2···OC complexes are referred to as the type-B2 complexes, and the other type-B complexes are referred to as the type-B1 complexes. The type-A complexes exhibit a relatively weak binding strength with Eint (interaction energy) values ranging from -7.11 to -15.55 kJ/mol, and the type-B complexes have a broad range of Eint values ranging from -9.45 to -98.44 kJ/mol. The Eint values of the type-A and type-B1 complexes go in the order SiH2 > GeH2 > SnH2 > PbH2. The AIM (atoms in molecules) analysis suggests that the tetrel bonds in type-A complexes are purely closed-shell interactions, and those in most type-B1 complexes have a partially covalent character. The EDA (Energy decomposition analysis) results indicate that the contribution values of the three energy terms go in the order electrostatic > dispersion > induction for the type-A and type-B2 complexes, and this order is electrostatic > induction > dispersion for the type-B1 complexes.

| S-EPMC10051284 | biostudies-literature

High mobility Si0.15Ge0.85 growth by using the molten target sputtering (MTS) within heteroepitaxy framework.

Project description:High-speed SiGe film is promising use in photonics and electronics technologies continue to replace Si-based devices. High mobility Si0.15 Ge0.85 film on sapphire was grown at 890 °C substrate temperature by using a conventional magnetron sputtering system within the heteroepitaxy framework. 890 °C substrate temperate is impractical for commercial device manufacturing due to long thermal soak, loading time, and costly process. To leverage the practical SiGe device applications, the Molten Target Sputtering (MTS) techniques is developed. The MTS is an economic and robust process from high flux density and liquid-state of molecules benefits. At 500 °C, the lowest substrate temperature, high mobility Si0.15Ge0.85 film with continues morphology and 99.7% majority-orientation were grown by using the MTS. The hall electron mobilities of the Si0.15Ge0.85 grown at 500 °C are 456 cm2V-1s-1 and 123.9 cm2V-1s-1 at 5.59 × 1018 cm3 and 3.5 × 1020 cm3 carrier concentration at 22.38 °C, respectively. The values are 550% higher hall electron mobilities than that of Si at equivalent carrier concentration and temperatures. We envision that the MTS is beneficial for the heteroepitaxy framework film growth that requires high substrate temperature to overcome the large lattice parameter mismatch between film and substrate.

| S-EPMC6689090 | biostudies-literature

Tunable graphene doping by modulating the nanopore geometry on a SiO2/Si substrate.

Project description:A tunable graphene doping method utilizing a SiO2/Si substrate with nanopores (NP) was introduced. Laser interference lithography (LIL) using a He-Cd laser (λ = 325 nm) was used to prepare pore size- and pitch-controllable NP SiO2/Si substrates. Then, bottom-contact graphene field effect transistors (G-FETs) were fabricated on the NP SiO2/Si substrate to measure the transfer curves. The graphene transferred onto the NP SiO2/Si substrate showed relatively n-doped behavior compared to the graphene transferred onto a flat SiO2/Si substrate, as evidenced by the blue-shift of the 2D peak position (∼2700 cm-1) in the Raman spectra due to contact doping. As the porosity increased within the substrate, the Dirac voltage shifted to a more positive or negative value, depending on the initial doping type (p- or n-type, respectively) of the contact doping. The Dirac voltage shifts with porosity were ascribed mainly to the compensation for the reduced capacitance owing to the SiO2-air hetero-structured dielectric layer within the periodically aligned nanopores capped by the suspended graphene (electrostatic doping). The hysteresis (Dirac voltage difference during the forward and backward scans) was reduced when utilizing an NP SiO2/Si substrate with smaller pores and/or a low porosity because fewer H2O or O2 molecules could be trapped inside the smaller pores.

| S-EPMC9078577 | biostudies-literature