Spatial Regression and Prediction of Water Quality in a Watershed with Complex Pollution Sources.
Ontology highlight
ABSTRACT:
SUBMITTER: Yang X
PROVIDER: S-EPMC5559613 | biostudies-other | 2017 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:It's vital to explore critical indicators when identifying potential pollution sources of urban rivers. However, the variations of urban river water qualities following temporal and spatial disturbances were highly local-dependent, further complicating the understanding of pollution emission laws. In order to understand the successional trajectory of water qualities of urban rivers and the underlying mechanisms controlling these dynamics at local scale, we collected daily monitoring data for 17 physical and chemical parameters from seven on-line monitoring stations in Nanfeihe River, Anhui, China, during the year 2018. The water quality at tributaries were similar, while that at main river was much different. A seasonal ''turning-back" pattern was observed in the water quality, which changed significantly from spring to summer but finally changed back in winter. This result was possibly regulated by seasonally-changed dissolved oxygen and water temperature. Linear mixed models showed that the site 2, with the highest loads of pollution, contributed the highest (β = 0.316, P < 0.001) to the main river City Water Quality Index (CWQI) index, but site 5, the geographically nearest site to main river monitoring station, did not show significant effect. In contrast, site 5 but not site 2 contributed the highest (β = 0.379, P < 0.001) to the main river water quality. Therefore, CWQI index was a better index than water quality to identify potential pollution sources with heavy loads of pollutants, despite temporal and spatial disturbances at local scales. These results highlight the role of aeration in water quality controlling of urban rivers, and emphasized the necessity to select proper index to accurately trace the latent pollution sources.
| S-EPMC8062557 | biostudies-literature
Project description:Understanding drivers of water quality in local watersheds is the first step for implementing targeted restoration practices. Nutrient inventories can inform water quality management decisions by identifying shifts in nitrogen (N) and phosphorus (P) balances over space and time while also keeping track of the likely urban and agricultural point and nonpoint sources of pollution. The Chesapeake Bay Program's Chesapeake Assessment Scenario Tool (CAST) provides N and P balance data for counties throughout the Chesapeake Bay watershed, and these data were leveraged to create a detailed nutrient inventory for all the counties in the watershed from 1985-2019. This study focuses on three primary watershed nutrient balance components-agricultural surplus, atmospheric deposition, and point source loads-which are thought to be the leading anthropogenic drivers of nutrient loading trends across the watershed. All inputs, outputs, and derived metrics (n=53) like agricultural surplus and nutrient use efficiency, were subjected to short- and long-term trend analyses to discern how sources of pollution to surface water have changed over time. Across the watershed from 1985-2019, downward trends in atmospheric deposition were ubiquitous. Though there are varying effects, long-term declines in agricultural surplus were observed, likely because nutrients are being managed more efficiently. Multiple counties' point source loads declined, primarily associated with upgrades at major cities that discharge treated wastewater directly to tidal waters. Despite all of these positive developments, recent increases in agricultural surpluses from 2009-2019 highlight that water quality gains may soon be reversed in many agricultural areas of the basin. Besides tracking progress and jurisdictional influence on pollution sources, the nutrient inventory can be used for retrospective water quality analysis to highlight drivers of past improvement/degradation of water quality trends and for decision makers to develop and track their near- and long-term watershed restoration strategies.
| S-EPMC10116850 | biostudies-literature
Project description:Accurate streamflow prediction plays a pivotal role in hydraulic project design, nonpoint source pollution estimation, and water resources planning and management. However, the highly non-linear relationship between rainfall and runoff makes prediction difficult with desirable accuracy. To improve the accuracy of monthly streamflow prediction, a seasonal Support Vector Regression (SVR) model coupled to the Soil and Water Assessment Tool (SWAT) model was developed for 13 subwatersheds in the Illinois River watershed (IRW), U.S. Terrain, precipitation, soil, land use and land cover, and monthly streamflow data were used to build the SWAT model. SWAT Streamflow output and the upstream drainage area were used as two input variables into SVR to build the hybrid SWAT-SVR model. The Calibration Uncertainty Procedure (SWAT-CUP) and Sequential Uncertainty Fitting-2 (SUFI-2) algorithms were applied to compare the model performance against SWAT-SVR. The spatial calibration and leave-one-out sampling methods were used to calibrate and validate the hybrid SWAT-SVR model. The results showed that the SWAT-SVR model had less deviation and better performance than SWAT-CUP simulations. SWAT-SVR predicted streamflow more accurately during the wet season than the dry season. The model worked well when it was applied to simulate medium flows with discharge between 5 m3 s-1 and 30 m3 s-1, and its applicable spatial scale fell between 500 to 3000 km2. The overall performance of the model on yearly time series is "Satisfactory". This new SWAT-SVR model has not only the ability to capture intrinsic non-linear behaviors between rainfall and runoff while considering the mechanism of runoff generation but also can serve as a reliable regional tool for an ungauged or limited data watershed that has similar hydrologic characteristics with the IRW.
| S-EPMC8041176 | biostudies-literature
Project description:A study was conducted to determine the primary sources of fecal pollution in a subtropical watershed using host-specific assays developed in temperate regions. Water samples (n = 534) from 10 different sites along the Rio Grande de Arecibo (RGA) watershed were collected mostly on a weekly basis (54 sampling events) during 13 months. DNA extracts from water samples were used in PCR assays to determine the occurrence of fecal bacteria (Bacteroidales, Clostridium coccoides, and enterococci) and human-, cattle-, swine-, and chicken-specific fecal sources. Feces from 12 different animals (n = 340) and wastewater treatment samples (n = 16) were analyzed to determine the specificity and distribution of host-specific assays. The human-specific assay (HF183) was found to be highly specific, as it did not cross-react with nontarget samples. The cattle marker (CF128) cross-reacted to some extent with swine, chicken, and turkeys and was present in 64% of the cattle samples tested. The swine assays showed poor host specificity, while the three chicken assays showed poor host distribution. Differences in the detection of host-specific markers were noted per site. While human and cattle assays showed moderate average detection rates throughout the watershed, areas impacted by wastewater treatment plants and cattle exhibited the highest prevalence of these markers. When conditional probability for positive signals was determined for each of the markers, the results indicated higher confidence levels for the human assay and lower levels for all the other assays. Overall, the results from this study suggest that additional assays are needed, particularly to track cattle, chicken, and swine fecal pollution sources in the RGA watershed. The results also suggest that the geographic stability of genetic markers needs to be determined prior to conducting applied source tracking studies in tropical settings.
| S-EPMC3591936 | biostudies-literature
Project description:This study assessed spatial and temporal variations of water quality to identify and quantify possible pollution sources affecting the Yeongsan River using multivariate statistical techniques (MSTs) and water quality index (WQI) values. A 15 year dataset of 11 water quality variables was used, covering 16 monitoring sites. The nutrient regime, organic matter, suspended solids, ionic contents, algal growth, and total coliform bacteria (TCB) were affected by the summer monsoon and the construction of weirs. Regression analysis showed that the algal growth was more highly regulated by total phosphorus (TP; R2 = 0.37) than total nitrogen (TN, R2 = 0.25) and TN/TP (R2 = 0.01) ratios in the river after weir construction and indicated that the river is a P-limited system. After constructing the weirs, the mean TN/TP ratio in the river was about 40, meaning it is a P-limited system. Cluster analysis was used to classify the sampling sites into highly, moderately, and less polluted sites based on water quality features. Stepwise discriminant analysis showed that pH, dissolved oxygen (DO), TN, biological oxygen demand (BOD), chemical oxygen demand (COD), chlorophyll-a (CHL-a), and TCB are the spatially discriminating parameters, while pH, water temperature, DO, electrical conductivity, total suspended solids, and COD are the most significant for discriminating among the three seasons. The Pearson network analysis showed that nutrients flow with organic matter in the river, while CHL-a showed the highest correlation with COD (r = 0.85), followed by TP (r = 0.49) and TN (r = 0.49). Average WQI values ranged from 55 to 141, indicating poor to unsuitable water quality in the river. The Mann-Kendall test showed increasing trends in COD and CHL-a but decreasing trends for TP, TN, and BOD due to impoundment effects. The principal component analysis combined with factor analysis and positive matrix factorization (PMF) showed that two sewage treatment plants, agricultural activities, and livestock farming adversely impacted river water quality. The PMF model returned greater R2 values for BOD (0.92), COD (0.87), TP (0.93), TN (0.91), CHL-a (0.93), and TCB (0.83), indicating reliable apportionment results. Our results suggest that MSTs and WQI can be effectively used for the simple interpretation of large-scale datasets to determine pollution sources and their spatiotemporal variations. The outcomes of our study may aid policymakers in managing the Yeongsan River.
| S-EPMC8392859 | biostudies-literature
Project description:The water quality index (WQI) has been used to identify threats to water quality and to support better water resource management. This study combines a machine learning algorithm, WQI, and remote sensing spectral indices (difference index, DI; ratio index, RI; and normalized difference index, NDI) through fractional derivatives methods and in turn establishes a model for estimating and assessing the WQI. The results show that the calculated WQI values range between 56.61 and 2,886.51. We also explore the relationship between reflectance data and the WQI. The number of bands with correlation coefficients passing a significance test at 0.01 first increases and then decreases with a peak appearing after 1.6 orders. WQI and DI as well as RI and NDI correlation coefficients between optimal band combinations of the peak also appear after 1.6 orders with R2 values of 0.92, 0.58 and 0.92. Finally, 22 WQI estimation models were established by POS-SVR to compare the predictive effects of these models. The models based on a spectral index of 1.6 were found to perform much better than the others, with an R2 of 0.92, an RMSE of 58.4, and an RPD of 2.81 and a slope of curve fitting of 0.97.
| S-EPMC5634425 | biostudies-literature
Project description:To improve water quality and reduce the negative impacts of sudden inputs of water pollution in the Lixia River watershed, China, a series of experimental water transfers from the Yangtze River to the Lixia River were conducted from 2 December 2006 to 7 January 2007. Water samples were collected every six days at 55 monitoring sites during this period. Eight water parameters (water temperature, pH, dissolved oxygen (DO), chemical oxygen demand (COD), potassium permanganate index (CODMn), ammonia nitrogen (NH4+-N), electrical conductivity (EC), and water transparency (WT)) were analyzed to determine changes in nutrient concentrations during water transfers. The comprehensive pollution index (Pi) and single-factor (Si) evaluation methods were applied to evaluate spatio-temporal patterns of water quality during water transfers. Water quality parameters displayed different spatial and temporal distribution patterns within the watershed. Water quality was improved significantly by the water transfers, especially for sites closer to water intake points. The degree of improvement is positively related to rates of transfer inflow and drainage outflow. The effects differed for different water quality parameters at each site and at different water transfer times. There were notable decreases in NH4+-N, DO, COD, and CODMn across the entire watershed. However, positive effects on EC and pH were not observed. It is concluded that freshwater transfers from the Yangtze River can be used as an emergency measure to flush pollutants from the Lixia River watershed. Improved understanding of the effects of water transfers on water quality can help the development and implementation of effective strategies to improve water quality within this watershed.
| S-EPMC4383563 | biostudies-literature
Project description:Rapid industrialization, urbanization, global warming, and climate change are compromising surface water quality across the globe. Consequently, water conservation is essential for both environmental sustainability and human survival. This study assesses the water quality of the Jamuna River in Bangladesh at five distinct sites during wet and dry seasons. It employs six global water quality indices (WQIs) and contrasts the results with Bangladesh's Environmental Quality Standard (EQS) and the Department of Environment (DoE) criteria. The WQI models used are the Weighted Arithmetic WQI (WAWQI), British Columbia WQI (BCWQI), Canadian Council of Ministers of the Environment WQI (CWQI), Assigned WQI (AWQI), Malaysian WQI (MWQI), and Oregon WQI (OWQI). Fifteen physicochemical parameters were analyzed according to each WQI model's guidelines. The findings reveal that most parameters surpass the standard permissible values. The WQI model results indicate that the average water quality across the five sites falls into the lowest category. A comparison of the WQI models suggests potential correlations between WAWQI and AWQI, as well as between MWQI and OWQI. The straightforward presentation of the WQI models indicates that while the river water requires treatment for household and drinking use, it remains suitable for irrigation. The decline in water quality is likely attributable to human activities, urbanization, municipal waste disposal, and industrial effluents. Authorities must prioritize regular monitoring and assessment of water quality to address the identified challenges. Restoring the water to an acceptable standard will become increasingly difficult without proactive measures.
| S-EPMC10665448 | biostudies-literature
Project description:Water resource management must strive to link catchment information with water quality monitoring. The present study attempted this for the field of microbial fecal source tracking (MST). A fecal pollution source profile based on catchment data (e.g., prevalence of fecal sources) was used to formulate a hypothesis about the dominant sources of pollution in an Austrian mountainous karst spring catchment. This allowed a statistical definition of methodical requirements necessary for an informed choice of MST methods. The hypothesis was tested in a 17-month investigation of spring water quality. The study followed a nested sampling design in order to cover the hydrological and pollution dynamics of the spring and to assess effects such as differential persistence between parameters. Genetic markers for the potential fecal sources as well as microbiological, hydrological, and chemo-physical parameters were measured. The hypothesis that ruminant animals were the dominant sources of fecal pollution in the catchment was clearly confirmed. It was also shown that the concentration of ruminant markers in feces was equally distributed in different ruminant source groups. The developed approach provides a tool for careful decision-making in MST study design and might be applied on various types of catchments and pollution situations.
| S-EPMC3084580 | biostudies-literature
Project description:Chromium is a potentially toxic metal occurring in water and groundwater as a result of natural and anthropogenic sources. Microbial interaction with mafic and ultramafic rocks together with geogenic processes release Cr (VI) in natural environment by chromite oxidation. Moreover, Cr (VI) pollution is largely related to several Cr (VI) industrial applications in the field of energy production, manufacturing of metals and chemicals, and subsequent waste and wastewater management. Chromium discharge in European Union (EU) waters is subjected to nationwide recommendations, which vary depending on the type of industry and receiving water body. Once in water, chromium mainly occurs in two oxidation states Cr (III) and Cr (VI) and related ion forms depending on pH values, redox potential, and presence of natural reducing agents. Public concerns with chromium are primarily related to hexavalent compounds owing to their toxic effects on humans, animals, plants, and microorganisms. Risks for human health range from skin irritation to DNA damages and cancer development, depending on dose, exposure level, and duration. Remediation strategies commonly used for Cr (VI) removal include physico-chemical and biological methods. This work critically presents their advantages and disadvantages, suggesting a site-specific and accurate evaluation for choosing the best available recovering technology.
| S-EPMC7432837 | biostudies-literature