Filomicelles from aromatic diblock copolymers increase paclitaxel-induced tumor cell death and aneuploidy compared with aliphatic copolymers.
Ontology highlight
ABSTRACT:
SUBMITTER: Nair PR
PROVIDER: S-EPMC5561966 | biostudies-other | 2016 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:We report the formation of a double-gyroid network morphology in normal-tapered poly(isoprene-b-isoprene/styrene-b-styrene) [P(I-IS-S)] and inverse-tapered poly(isoprene-b- styrene/isoprene-b-styrene) [P(I-SI-S)] diblock copolymers. Our tapered diblock copolymers with overall poly(styrene) volume fractions of 0.65 (normal-tapered) and 0.67 (inverse-tapered), and tapered regions comprising 30 volume percent of the total polymer, were shown to self-assemble into the double-gyroid network morphology through a combination of small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The block copolymers were synthesized by anionic polymerization, where the tapered region between the pure poly(isoprene) and poly(styrene) blocks was generated using a semi-batch feed with programmed syringe pumps. The overall composition of these tapered copolymers lies within the expected network-forming region for conventional poly(isoprene-b-styrene) [P(I-S)] diblock copolymers. Dynamic mechanical analysis (DMA) clearly demonstrated that the order-disorder transition temperatures (T(ODT)'s) of the network-forming tapered block copolymers were depressed when compared to the T(ODT) of their non-tapered counterpart, with the P(I-SI-S) showing the greater drop in T(ODT). These results indicate that it is possible to manipulate the copolymer composition profile between blocks in a diblock copolymer, allowing significant control over the T(ODT), while maintaining the ability to form complex network structures.
| S-EPMC3119550 | biostudies-literature
Project description:Supramolecular block copolymers (PS-DAT-sb-PI-Thy) were synthesized via noncovalent hydrogen bonding between well-defined thymine end-functionalized polyisoprene (PI-Thy) and diaminotriazine (DAT) end-functionalized polystyrene (PS-DAT). Three covalently linked block copolymers were also synthesized for comparison with the noncovalent supramolecular block copolymers. The complementary DAT/Thy interaction resulted in the microphase separation of the supramolecular block copolymer system. Detailed characterization of all functionalized homopolymers and block copolymers was carried out via proton nuclear magnetic resonance (1H NMR) spectroscopy, gel permeation chromatography, matrix-assisted laser desorption/ionization-time of flight mass spectrometry, and differential scanning calorimetry. The self-assembly process of supramolecular block copolymers was evidenced by transmission electron microscopy. Small-angle X-ray scattering was also performed to study the microphase separation of supramolecular and covalently linked block copolymers. Comparison of microphase separation images of supramolecular block copolymers and the corresponding covalently linked analogues reveals differences in d-spacing and microdomain shape.
| S-EPMC7460553 | biostudies-literature
Project description:The formation of unusual multilayered parallel lamellae-in-lamellae in symmetric supramolecular double-comb diblock copolymers is presented. While keeping the concentration of surfactant fixed, the number of internal layers was found to increase with molecular weight M up to 34 for the largest block copolymer. The number of internal structures n was established to scale as M0.67 and therefore enables easy design of such structures with great precision.
| S-EPMC5113798 | biostudies-literature
Project description:A series of diblock copolymers containing an endosomal-releasing segment composed of diethylaminoethyl methacrylate (DEAEMA) and butyl methacrylate (BMA) were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The materials were designed to condense plasmid DNA (pDNA) through electrostatic interactions with a cationic poly(N,N-dimethylaminoethyl methacrylate) (DMAEMA) first block. The pDMAEMA was employed as a macro chain transfer agent (macroCTA) for the synthesis of a series in which the relative feed ratios of DEAEMA and BMA were systematically varied from 20% to 70% BMA. The resultant diblock copolymers exhibited low polydispersity (PDI ≤ 1.06) with similar molecular weights (M(n) = 19.3-23.1 kDa). Dynamic light scattering (DLS) measurements in combination with (1)H NMR D(2)O studies demonstrated that the free copolymers assemble into core-shell micelles at physiological pH. Reduction of the solution pH to values representative of endosomal/lysosomal compartments induced an increase in the net cationic charge of the core through protonation of the DEAEMA residues. This protonation promotes micelle destabilization and exposure of the hydrophobic BMA residues that destabilize biological membranes. The pH value at which this micelle-to-unimer transition occurred was dependent on the hydrophobic content of the copolymer, with higher BMA-containing copolymer compositions exhibiting pH-induced transitions to the membrane-destabilizing state at successively lower pH values. The ability of the diblock copolymers to deliver pDNA was subsequently investigated using a GFP expression vector in two monocyte cell lines. High levels of DNA transfection were observed for the copolymer compositions exhibiting the sharpest pH transitions and membrane destabilizing activities, demonstrating the importance of tuning the endosomal-releasing segment composition.
| S-EPMC3266685 | biostudies-literature
Project description:Polymer vesicles, or polymersomes, are promising candidates for applications in drug delivery and tissue imaging. While a vast variety of polymers have been explored for their ability to assemble into polymersomes, relatively little research on the functionalization of these polymers has been reported. We present here a novel route for the synthesis of poly(caprolactone)-b-poly(ethylene glycol) (PCL-b-PEG) diblock copolymers that allows for the insertion of functional groups at the block junctions and the assembly of functional membranes. This modular synthesis has been developed on the basis of solid-phase peptide synthesis techniques and is accomplished through the formation of two peptide bonds, one between an amine-terminated PEG and the carboxyl moiety of the functional group and the other between the functional group amine and a carboxy-terminated PCL. As a demonstration of the potential utility of the resulting vesicles, we incorporated two different amino acid functional groups at the junction. 2-Nitrophenylalanine was utilized to create UV-responsive membranes in which the vesicles were destabilized and released encapsulated contents upon irradiation. A fluorescein-conjugated lysine was also utilized to create stable fluorescent membranes in which the fluorescence was built into the polymer. This method should contribute to our ability to further develop smart, functional membranes.
| S-EPMC2856336 | biostudies-literature
Project description:The self-assembly of synthetic diblock copolymers has been extensively studied experimentally and theoretically. In contrast, self-assembly of polypeptide diblock copolymers has so far been mostly studied experimentally. We discovered that the theory developed for synthetic diblock copolymer does not fully explain the self-assembly of elastin-like polypeptide diblock copolymers, leading us to generalize the theory to make it applicable for these polypeptides. We demonstrated that elastin-like polypeptide diblocks self-assemble into weak micelles with dense cores and almost unstretched coronas, a state not previously observed for synthetic diblock copolymers. Weak micelles form if the surface tension at the core-corona interface is low compared to that expected of a micelle with a dense core. The predictions of the theory of weak micelles for the critical micelle temperature, hydrodynamic radius, and aggregation number of elastin-like polypeptide diblocks are in reasonable agreement with the experimentally measured values. The unique and unprecedented control of amphiphilicity in these recombinant peptide polymers reveals a new micellar state that has not been previously observed in synthetic diblock copolymer systems.
| S-EPMC4822422 | biostudies-literature
Project description:In this study, we synthesized amphiphilic poly(2,7⁻(9,9⁻dioctylfluorene))⁻block⁻N,N⁻(diisopropylamino)ethyl methacrylate (POF⁻b⁻PDPMAEMA) rod-coil diblock copolymers by atom transfer radical polymerization (ATRP). The structure and multifunctional sensing properties of these copolymers were also investigated. The POF rod segment length of 10 was fixed and the PDPAEMA coil segment lengths of 90 and 197 were changed, respectively. The micellar aggregates of POF10⁻b⁻PDPAEMA90 rod-coil diblock copolymer in water showed a reversible shape transition from cylinder bundles to spheres when the temperature was changed from 20 to 80 °C or the pH was changed from 11 to 2. The atomic force microscopy (AFM) and transmission electron microscopy (TEM) measurements indicated that the temperature had also an obvious influence on the micelle size. In addition, since POF10⁻b⁻PDPAEMA90 had a lower critical solution temperature, its photoluminescence (PL) intensity in water is thermoreversible. The PL spectra showed that the POF⁻b⁻PDPAEMA copolymer had a reversible on/off profile at elevated temperatures, and thus could be used as an on/off fluorescent indicator for temperature or pH. The fluorescence intensity distribution of pH switched from "off⁻on" to "on⁻off" as the temperature increased. These results showed that the POF⁻b⁻PDPAEMA copolymer has a potential application for temperature and pH sensing materials.
| S-EPMC6418999 | biostudies-literature
Project description:Organic solvents, such as cyclohexane, cyclohexene, methylcyclohexane, benzene and toluene, are widely used as both reagents and solvents in industrial processes. Despite the ubiquity of these liquids, the local structures that govern the chemical properties have not been studied extensively. Herein, we report neutron diffraction measurements on liquid cyclohexane, cyclohexene, methylcyclohexane, benzene and toluene at 298?K to obtain a detailed description of the local structure in these compounds. The radial distribution functions of the centres of the molecules, as well as the partial distribution functions for the double bond for cyclohexene and methyl group for methylcyclohexane and toluene have been calculated. Additionally, probability density functions and angular radial distribution functions were extracted to provide a full description of the local structure within the chosen liquids. Structural motifs are discussed and compared for all liquids, referring specifically to the functional group and aromaticity present in the different liquids.
| S-EPMC4999024 | biostudies-literature
Project description:Polymerization-induced self-assembly (PISA) is used for the highly convenient and efficient preparation of ampholytic diblock copolymer nanoparticles directly in acidic aqueous solution. Cationic nanoparticles comprising a protonated polyamine stabilizer block and a hydrophobic polyacid core-forming block are formed at pH 2. Micelle inversion occurs at pH 10 to produce anionic nanoparticles with an ionized polyacid stabilizer block and a hydrophobic polyamine core-forming block. Macroscopic precipitation occurs at around pH 6-7, which lies close to the isoelectric point of this ampholytic diblock copolymer. Incorporation of fluorescein and rhodamine dye labels into the acid and amine blocks, respectively, leads to dual-color bifluorescent self-reporting pH-responsive nanoparticles.
| S-EPMC5577634 | biostudies-literature
Project description:Mechanically robust battery electrodes are desired for applications in wearable devices, flexible displays, and structural energy and power. In this regard, the challenge is to balance mechanical and electrochemical properties in materials that are inherently brittle. Here, we demonstrate a unique water-based self-assembly approach that incorporates a diblock copolymer bearing electron- and ion-conducting blocks, poly(3-hexylthiophene)-block-poly(ethyleneoxide) (P3HT-b-PEO), with V2O5 to form a flexible, tough, carbon-free hybrid battery cathode. V2O5 is a promising lithium intercalation material, but it remains limited by its poor conductivity and mechanical properties. Our approach leads to a unique electrode structure consisting of interlocking V2O5 layers glued together with micellar aggregates of P3HT-b-PEO, which results in robust mechanical properties, far exceeding the those obtained from conventional fluoropolymer binders. Only 5 wt % polymer is required to triple the flexibility of V2O5, and electrodes comprised of 10 wt % polymer have unusually high toughness (293 kJ/m(3)) and specific energy (530 Wh/kg), both higher than reduced graphene oxide paper electrodes. Furthermore, addition of P3HT-b-PEO enhances lithium-ion diffusion, eliminates cracking during cycling, and boosts cyclability relative to V2O5 alone. These results highlight the importance of tradeoffs between mechanical and electrochemical performance, where polymer content can be used to tune both aspects.
| S-EPMC4585753 | biostudies-literature