Dataset Information

Impact of light intensity on the polymerization kinetics and network structure of model hydrophobic and hydrophilic methacrylate based dental adhesive resin.

ABSTRACT: The impact of light intensity on the degree of conversion (DC), rate of polymerization and network structure was investigated for hydrophobic and hydrophilic dental adhesive resins. Two and three component photoinitiating (PI) systems were used in this study. Low light intensities had a negative impact on the polymerization efficiency for the hydrophilic resin with 2 component PI system. Incorporation of iodonium salt in the hydrophilic resin significantly improved the polymerization efficiency of the HEMA/BisGMA system and led to a substantial DC, even at low light intensities. The results suggested that shorter polymer chains were formed in the presence of iodonium salt. It appears that there is little or no impact of light intensity on the polymer structure of the 2 component PI system. Light intensity has subtle impact on the polymer structure of the 3 component PI system. In the case of the hydrophobic resin, the polymer is so highly cross-linked that the presence of shorter chains for the 3 component PI system does not cause a decrease in the glass transition temperature (Tg ) when compared to the 2 component PI system. For the hydrophilic resin, the presence of shorter polymer chains in the 3 component PI system reduces the Tg when compared with the corresponding 2 component PI system. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1666-1678, 2016.

SUBMITTER: Abedin F

PROVIDER: S-EPMC5568776 | biostudies-other | 2016 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:A self-strengthening methacrylate-based dental adhesive system was developed by introducing an epoxy cyclohexyl trimethoxysilane (TS) which contains both epoxy and methoxysilyl functional groups. The experimental formulation, HEMA/BisGMA/TS (22.5/27.5/50, wt%), was polymerized by visible-light. Real-time Fourier transform infrared spectroscopy (FTIR) was used to investigate in situ the free radical polymerization of methacrylate, ring-opening cationic polymerization of epoxy, and photoacid-induced sol-gel reactions. Among the three simultaneous reactions, the reaction rate of the free radical polymerization was the highest and the hydrolysis/condensation rate was the lowest. With 40s-irradiation, the degrees of conversion of the double bond and epoxy groups at 600 s were 73.2±1.2%, 87.9±2.4%, respectively. Hydrolysis of the methoxysilyl group was initially <5%, and increased gradually to about 50% after 48 h dark storage. Photoacids generated through the visible-light-induced reaction were effective in catalyzing both epoxy ring-opening polymerization and methoxysilyl sol-gel reaction. The mechanical properties of copolymers made with TS concentrations from 5 to 35 wt% were obtained using dynamic mechanical analysis (DMA). In wet conditions, the storage moduli at 70 °C and glass transition temperature were significantly higher than that of the control (p<0.05); these properties increased with TS concentration and storage time. The post reaction of hydrolysis/condensation of alkoxysilane could provide persistent strengthening whether in a neutral or acidic environment and these characteristics could lead to enhanced mechanical properties in the oral environment. The cumulative amount of leached species decreased significantly in the TS-containing copolymers. These results provide valuable information for the development of dental adhesives with reduced leaching of methacrylate monomers and enhanced mechanical properties under the wet, oral environment.

Project description:Polymerization shrinkage of resin composite can compromise the longevity of restorations. To minimize this problem, the monomeric composition of composites have been modified. The objective of this study was to conduct a meta-analysis to assess the clinical behavior of restorations performed with low polymerization shrinkage resin composite in comparison with traditional methacrylates-based resin composite. This systematic review was registered at Prospero data system (CRD42015023940). Studies were searched in the electronic databases PubMed, Web of Science, Scopus, Lilacs and EMBASE according to a predefined search strategy. The inclusion criteria were as follow: (1) randomized controlled clinical trials with at least six months of follow-up; (2) studies investigating composites with monomers designed to reduce polymerization shrinkage; (3) studies conducted with class I or II restorations in the permanent dentition; and (4) studies that assessed at least one of the following criteria: marginal integrity/adaptation, marginal discoloration, recurent caries, retention of composite restorations, and postoperative sensitivity. Two independent reviewers analyzed the articles to determine inclusion and risk of bias. The search conducted in the databases resulted in a total of 14,217 studies. After reviewing the references and citations, 21 articles remained. The longest clinical follow-up time was 60 months. The meta-analysis of the data in the included studies demonstrated that only one variable (marginal adaptation after 12 months) showed statistically significant outcomes, in which methacrylates-based composites presented significantly better results than resin composites containing modified monomers. The good level of the scientific evidence as well as the overall low risk of bias of the included studies indicate that composites with silorane, ormocer or bulk-fill type modified monomers have a clinical performance similar to conventional resin composites.

Dataset Information

Impact of light intensity on the polymerization kinetics and network structure of model hydrophobic and hydrophilic methacrylate based dental adhesive resin.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets