Dataset Information

A Monte Carlo approach for scattering correction towards quantitative neutron imaging of polycrystals.

ABSTRACT: The development of neutron imaging from a qualitative inspection tool towards a quantitative technique in materials science has increased the requirements for accuracy significantly. Quantifying the thickness or the density of polycrystalline samples with high accuracy using neutron imaging has two main problems: (i) the scattering from the sample creates artefacts on the image and (ii) there is a lack of specific reference attenuation coefficients. This work presents experimental and simulation results to explain and approach these problems. Firstly, a series of neutron radiography and tomography experiments of iron, copper and vanadium are performed and serve as a reference. These materials were selected because they attenuate neutrons mainly through coherent (Fe and Cu) and incoherent (V) scattering. Secondly, an ad hoc Monte Carlo model was developed, based on beamline, sample and detector parameters, in order to simulate experiments, understand the physics involved and interpret the experimental data. The model, developed in the McStas framework, uses a priori information about the sample geometry and crystalline structure, as well as beamline settings, such as spectrum, geometry and detector type. The validity of the simulations is then verified with experimental results for the two problems that motivated this work: (i) the scattering distribution in transmission imaging and (ii) the calculated attenuation coefficients.

SUBMITTER: Raventos M

PROVIDER: S-EPMC5884388 | biostudies-other | 2018 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

A Monte Carlo approach for scattering correction towards quantitative neutron imaging of polycrystals.

Raventós M M Lehmann E H EH Boin M M Morgano M M Hovind J J Harti R R Valsecchi J J Kaestner A A Carminati C C Boillat P P Trtik P P Schmid F F Siegwart M M Mannes D D Strobl M M Grünzweig C C

Journal of applied crystallography 20180301 Pt 2

The development of neutron imaging from a qualitative inspection tool towards a quantitative technique in materials science has increased the requirements for accuracy significantly. Quantifying the thickness or the density of polycrystalline samples with high accuracy using neutron imaging has two main problems: (i) the scattering from the sample creates artefacts on the image and (ii) there is a lack of specific reference attenuation coefficients. This work presents experimental and simulation ...[more]

PMID: 29657567

Similar Datasets

Project description:The advancement of imaging systems has significantly ameliorated various technologies, including Intelligence Surveillance Reconnaissance Systems and Guidance Systems, by enhancing target detection, recognition, identification, positioning, and tracking capabilities. These systems can be countered by deploying obscurants like smoke, dust, or fog to hinder visibility and communication. However, these counter-systems affect the visibility of both sides of the cloud. In this sense, this manuscript introduces a new concept of a smoke cloud composed of engineered Janus particles to conceal the target image on one side while providing clear vision from the other. The proposed method exploits the unique scattering properties of Janus particles, which selectively interact with photons from different directions to open up the possibility of asymmetric imaging. This approach employs a model that combines a genetic algorithm with Discrete Dipole Approximation to optimize the Janus particles' geometrical parameters for the desired scattering properties. Moreover, we propose a Monte Carlo-based approach to calculate the image formed as photons pass through the cloud, considering highly asymmetric particles, such as Janus particles. The effectiveness of the cloud in disguising a target is evaluated by calculating the Probability of Detection (PD) and the Probability of Identification (PID) based on the constructed image. The optimized Janus particles can produce a cloud where it is possible to identify a target more than 50% of the time from one side (PID > 50%) while the target is not detected more than 50% of the time from the other side (PD < 50%). The results demonstrate that the Janus particle-engineered smoke enables asymmetric imaging with simultaneous concealment from one side and clear visualization from the other. This research opens intriguing possibilities for modern obscurant design and imaging systems through highly asymmetric and inhomogeneous particles besides target detection and identification capabilities in challenging environments.

Project description:High-throughput gene expression data are often obtained from pure or complex (heterogeneous) biological samples. In the latter case, data obtained are a mixture of different cell types and the heterogeneity imposes some difficulties in the analysis of such data. In order to make conclusions on gene expresssion data obtained from heterogeneous samples, methods such as microdissection and flow cytometry have been employed to physically separate the constituting cell types. However, these manual approaches are time consuming when measuring the responses of multiple cell types simultaneously. In addition, exposed samples, on many occasions, end up being contaminated with external perturbations and this may result in an altered yield of molecular content. In this paper, we model the heterogeneous gene expression data using a Bayesian framework, treating the cell type proportions and the cell-type specific expressions as the parameters of the model. Specifically, we present a novel sequential Monte Carlo (SMC) sampler for estimating the model parameters by approximating their posterior distributions with a set of weighted samples. The SMC framework is a robust and efficient approach where we construct a sequence of artificial target (posterior) distributions on spaces of increasing dimensions which admit the distributions of interest as marginals. The proposed algorithm is evaluated on simulated datasets and publicly available real datasets, including Affymetrix oligonucleotide arrays and national center for biotechnology information (NCBI) gene expression omnibus (GEO), with varying number of cell types. The results obtained on all datasets show a superior performance with an improved accuracy in the estimation of cell type proportions and the cell-type specific expressions, and in addition, more accurate identification of differentially expressed genes when compared to other widely known methods for blind decomposition of heterogeneous gene expression data such as Dsection and the nonnegative matrix factorization (NMF) algorithms. MATLAB implementation of the proposed SMC algorithm is available to download at https://github.com/moyanre/smcgenedeconv.git.

Project description:Förster Resonance Energy Transfer (FRET) experiments probe molecular distances via distance dependent energy transfer from an excited donor dye to an acceptor dye. Single molecule experiments not only probe average distances, but also distance distributions or even fluctuations, and thus provide a powerful tool to study biomolecular structure and dynamics. However, the measured energy transfer efficiency depends not only on the distance between the dyes, but also on their mutual orientation, which is typically inaccessible to experiments. Thus, assumptions on the orientation distributions and averages are usually made, limiting the accuracy of the distance distributions extracted from FRET experiments. Here, we demonstrate that by combining single molecule FRET experiments with the mutual dye orientation statistics obtained from Molecular Dynamics (MD) simulations, improved estimates of distances and distributions are obtained. From the simulated time-dependent mutual orientations, FRET efficiencies are calculated and the full statistics of individual photon absorption, energy transfer, and photon emission events is obtained from subsequent Monte Carlo (MC) simulations of the FRET kinetics. All recorded emission events are collected to bursts from which efficiency distributions are calculated in close resemblance to the actual FRET experiment, taking shot noise fully into account. Using polyproline chains with attached Alexa 488 and Alexa 594 dyes as a test system, we demonstrate the feasibility of this approach by direct comparison to experimental data. We identified cis-isomers and different static local environments as sources of the experimentally observed heterogeneity. Reconstructions of distance distributions from experimental data at different levels of theory demonstrate how the respective underlying assumptions and approximations affect the obtained accuracy. Our results show that dye fluctuations obtained from MD simulations, combined with MC single photon kinetics, provide a versatile tool to improve the accuracy of distance distributions that can be extracted from measured single molecule FRET efficiencies.

Dataset Information

A Monte Carlo approach for scattering correction towards quantitative neutron imaging of polycrystals.

Publications

A Monte Carlo approach for scattering correction towards quantitative neutron imaging of polycrystals.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets