Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tolerance of Perovskite Solar Cell to High-Energy Particle Irradiations in Space Environment.

ABSTRACT: Materials to be used in the space environment have to withstand extreme conditions, particularly with respect to cosmic particle irradiation. We report robust stability and high tolerance of organolead trihalide perovskite solar cells against high-fluence electron and proton beams. We found that methylammonium and formamidinium-based lead iodide perovskite solar cells composed of TiO2 and a conductive polymer, as electron and hole transport materials, can survive against accumulated dose levels up to 1016 and 1015particles/cm2 of electrons (1 MeV) and protons (50 KeV), respectively, which are known to completely destroy crystalline Si-, GaAS-, and InGaP/GaAs-based solar cells in spacecraft. These results justify the superior tolerance of perovskite photovoltaic materials to severe space radiations and their usefulness in satellite missions.

SUBMITTER: Miyazawa Y

PROVIDER: S-EPMC6136902 | biostudies-other | 2018 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Tolerance of Perovskite Solar Cell to High-Energy Particle Irradiations in Space Environment.

Miyazawa Yu Y Ikegami Masashi M Chen Hsin-Wei HW Ohshima Takeshi T Imaizumi Mitsuru M Hirose Kazuyuki K Miyasaka Tsutomu T

iScience 20180327

Materials to be used in the space environment have to withstand extreme conditions, particularly with respect to cosmic particle irradiation. We report robust stability and high tolerance of organolead trihalide perovskite solar cells against high-fluence electron and proton beams. We found that methylammonium and formamidinium-based lead iodide perovskite solar cells composed of TiO<sub>2</sub> and a conductive polymer, as electron and hole transport materials, can survive against accumulated d ...[more]

PMID: 30428371

Similar Datasets

A perovskite solar cell-photothermal-thermoelectric tandem system for enhanced solar energy utilization.

Project description:Photovoltaic-thermoelectric (PV-TE) tandem system has been considered as an effective way to fully utilize the solar spectrum, and has been demonstrated in a perovskite solar cell (PSC)-thermoelectric (TE) configuration. However, the conventional PSC-TE tandem architecture cannot convert infrared light transmitted through the upper PSC into heat effectively, impeding the heat-electricity conversion of TE devices. Herein, a semi-transparent PSC-photothermal-TE tandem system is designed for improved photothermal utilization. Through optimizing the buffer layer of the back transparent electrode, semi-transparent PSC with a power conversion efficiency (PCE) of 13% and an average transmittance of 53% in the range of 800-1500 nm was obtained. On this basis, a photothermal thin film was introduced between the semi-transparent PSC and the TE device, which increased the efficiency contribution ratio of the TE device from 14% to 19%, showing enhanced utilization of AM 1.5 G solar spectrum and improved photo-thermal-electric conversion efficiency.

| S-EPMC11020555 | biostudies-literature

Printing High-Efficiency Perovskite Solar Cells in High-Humidity Ambient Environment-An In Situ Guided Investigation.

Project description:Extensive studies are conducted on perovskite solar cells (PSCs) with significant performance advances (mainly spin coating techniques), which have encouraged recent efforts on scalable coating techniques for the manufacture of PSCs. However, devices fabricated by blade coating techniques are inferior to state-of-the-art spin-coated devices because the power conversion efficiency (PCE) is highly dependent on the morphology and crystallization kinetics in the controlled environment and the delicate solvent system engineering. In this study, based on the widely studied perovskite solution system dimethylformamide-dimethyl sulfoxide, air-knife-assisted ambient fabrication of PSCs at a high relative humidity of 55 ± 5% is reported. In-depth time-resolved UV-vis spectrometry is carried out to investigate the impact of solvent removal and crystallization rate, which are critical factors influencing the crystallization kinetics and morphology because of adventitious moisture. UV-vis spectrometry enables accurate determination of the thickness of the wet precursor film. Anti-solvent-free, high-humidity ambient coatings of hysteresis-free PSCs with PCEs of 21.1% and 18.0% are demonstrated for 0.06 and 1 cm2 devices, respectively. These PSCs exhibit comparable stability to those fabricated in a glovebox, thus demonstrating their high potential.

| S-EPMC7967091 | biostudies-literature

Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells.

Project description:Charged defects at the surface of the organic-inorganic perovskite active layer are detrimental to solar cells due to exacerbated charge carrier recombination. Here we show that charged surface defects can be benign after passivation and further exploited for reconfiguration of interfacial energy band structure. Based on the electrostatic interaction between oppositely charged ions, Lewis-acid-featured fullerene skeleton after iodide ionization (PCBB-3N-3I) not only efficiently passivates positively charged surface defects but also assembles on top of the perovskite active layer with preferred orientation. Consequently, PCBB-3N-3I with a strong molecular electric dipole forms a dipole interlayer to reconfigure interfacial energy band structure, leading to enhanced built-in potential and charge collection. As a result, inverted structure planar heterojunction perovskite solar cells exhibit the promising power conversion efficiency of 21.1% and robust ambient stability. This work opens up a new window to boost perovskite solar cells via rational exploitation of charged defects beyond passivation.

| S-EPMC6785549 | biostudies-literature

Life cycle energy use and environmental implications of high-performance perovskite tandem solar cells.

Project description:A promising route to widespread deployment of photovoltaics is to harness inexpensive, highly-efficient tandems. We perform holistic life cycle assessments on the energy payback time, carbon footprint, and environmental impact scores for perovskite-silicon and perovskite-perovskite tandems benchmarked against state-of-the-art commercial silicon cells. The scalability of processing steps and materials in the manufacture and operation of tandems is considered. The resulting energy payback time and greenhouse gas emission factor of the all-perovskite tandem configuration are 0.35 years and 10.7 g CO2-eq/kWh, respectively, compared to 1.52 years and 24.6 g CO2-eq/kWh for the silicon benchmark. Prolonging the lifetime provides a strong technological lever for reducing the carbon footprint such that the perovskite-silicon tandem can outcompete the current benchmark on energy and environmental performance. Perovskite-perovskite tandems with flexible and lightweight form factors further improve the energy and environmental performance by around 6% and thus enhance the potential for large-scale, sustainable deployment.

| S-EPMC7399695 | biostudies-literature

Close-Space Sublimation as a Scalable Method for Perovskite Solar Cells.

Project description:Vacuum techniques for perovskite photovoltaics (PV) are promising for their scalability but are rarely studied with techniques readily adaptable for industry. In this work, we study the use of close-space sublimation (CSS) for making perovskite solar cells, a technique that has seen widespread use in industry, including in PV, and benefits from high material-transfer and low working pressures. A pressed pellet of formamidinium iodide (FAI) can be used multiple times as an organic source, without needing replacement. Using CSS at a rough vacuum (10 mbar), efficient cesium formamidinium lead iodide perovskite based solar cells are obtained reaching a maximum photoconversion efficiency (PCE) of 18.7%. They maintain their performance for >650 h when thermally stressed at 85 °C in a nitrogen environment. To explain the initial rise in PCE upon heating, we used drift-diffusion simulations and identified a reduction in bulk trap density as the primary factor.

| S-EPMC10928705 | biostudies-literature

Nanoscale Perovskite-Sensitized Solar Cell Revisited: Dye-Cell or Perovskite-Cell?

Project description:A general and straightforward way of preparing few-nanometer-sized well-separated MAPbIx Br3-x (MA=methylammonium) perovskite photosensitizers on the surface of an approximately 1 μm thick mesoporous TiO2 photoanode was suggested through a two-step sequential deposition of low-concentrated lead halides (0.10-0.30 m PbI2 or PbBr2 ) and methylammonium iodide/bromide (MAI/MABr). When those nanoscale MAPbIx Br3-x perovskites were incorporated as a photosensitizer in typical solid-state dye-sensitized solar cells (ss-DSSCs), it could be verified clearly by the capacitance analysis that nano-particulate MAPbI3 perovskites play the same role as that of a typical dye sensitizer (MK-2 molecule) although their size, composition, and structure are different.

| S-EPMC7496478 | biostudies-literature

Superior Textured Film and Process Tolerance Enabled by Intermediate-State Engineering for High-Efficiency Perovskite Solar Cells.

Project description:As the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is increased to as high over 25%, it becomes pre-eminent to study a scalable process with wide processing window to fabricate large-area uniform perovskite films with good light-trapping performance. A stable and uniform intermediate-state complex film is obtained by using tetramethylene sulfoxide (TMSO), which extends the annealing window to as long as 20 min, promotes the formation of a high-quality perovskite film with larger grains (over 400 nm) and spontaneously forms the surface texture to result in an improved fill factor and open-circuit voltage (V oc). Moreover, the superior surface texture significantly increases the long-wavelength response, leading to an improved short-circuit current density (J sc). As a result, the maximum PCE of 21.14% is achieved based on a simple planar cell structure without any interface passivation. Moreover, a large area module with active area of 6.75 cm2 is assembled using the optimized TMSO process, showing efficiency as high as 16.57%. The study paves the way to the rational design of highly efficient PSCs for potential scaled-up production.

| S-EPMC7055579 | biostudies-literature

Synergistic Interface Energy Band Alignment Optimization and Defect Passivation toward Efficient and Simple-Structured Perovskite Solar Cell.

Project description:Efficient electron transport layer-free perovskite solar cells (ETL-free PSCs) with cost-effective and simplified design can greatly promote the large area flexible application of PSCs. However, the absence of ETL usually leads to the mismatched indium tin oxide (ITO)/perovskite interface energy levels, which limits charge transfer and collection, and results in severe energy loss and poor device performance. To address this, a polar nonconjugated small-molecule modifier is introduced to lower the work function of ITO and optimize interface energy level alignment by virtue of an inherent dipole, as verified by photoemission spectroscopy and Kelvin probe force microscopy measurements. The resultant barrier-free ITO/perovskite contact favors efficient charge transfer and suppresses nonradiative recombination, endowing the device with enhanced open circuit voltage, short circuit current density, and fill factor, simultaneously. Accordingly, power conversion efficiency increases greatly from 12.81% to a record breaking 20.55%, comparable to state-of-the-art PSCs with a sophisticated ETL. Also, the stability is enhanced with decreased hysteresis effect due to interface defect passivation and inhibited interface charge accumulation. This work facilitates the further development of highly efficient, flexible, and recyclable ETL-free PSCs with simplified design and low cost by interface electronic structure engineering through facile electrode modification.

| S-EPMC7080507 | biostudies-literature

Reactive Inorganic Vapor Deposition of Perovskite Oxynitride Films for Solar Energy Conversion.

Project description:The synthesis of perovskite oxynitrides, which are promising photoanode candidates for solar energy conversion, is normally accomplished by high-temperature ammonolysis of oxides and carbonate precursors, thus making the deposition of their planar films onto conductive substrates challenging. Here, we proposed a facile strategy to prepare a series of perovskite oxynitride films. Taking SrTaO2N as a prototype, we prepared SrTaO2N films on Ta foils under NH3 flow by utilizing the vaporized SrCl2/SrCO3 eutectic salt. The SrTaO2N films exhibit solar water-splitting photocurrents of 3.0 mA cm-2 at 1.23 V vs. RHE (reversible hydrogen electrode), which increases by 270% compared to the highest photocurrent (1.1 mA cm-2 at 1.23 V vs. RHE) of SrTaO2N reported in the literature. This strategy may also be applied to directly prepare a series of perovskite oxynitride films on conductive substrates such as ATaO2N (A = Ca, Ba) and ANbO2N (A = Sr, Ba).

| S-EPMC6946269 | biostudies-literature

Interfacial Energy Level Tuning for Efficient and Thermostable CsPbI2Br Perovskite Solar Cells.

Project description:Inorganic mixed-halide CsPbX3-based perovskite solar cells (PeSCs) are emerging as one of the most promising types of PeSCs on account of their thermostability compared to organic-inorganic hybrid counterparts. However, dissatisfactory device performance and high processing temperature impede their development for viable applications. Herein, a facile route is presented for tuning the energy levels and electrical properties of sol-gel-derived ZnO electron transport material (ETM) via the doping of a classical alkali metal carbonate Cs2CO3. Compared to bare ZnO, Cs2CO3-doped ZnO possesses more favorable interface energetics in contact with the CsPbI2Br perovskite layer, which can reduce the ohmic loss to a negligible level. The optimized PeSCs achieve an improved open-circuit voltage of 1.28 V, together with an increase in fill factor and short-circuit current. The optimized power conversion efficiencies of 16.42% and 14.82% are realized on rigid glass substrate and flexible plastic substrate, respectively. A high thermostability can be simultaneously obtained via defect passivation at the Cs2CO3-doped ZnO/CsPbI2Br interface, and 81% of the initial efficiency is retained after aging for 200 h at 85 °C.

| S-EPMC6947708 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data