Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data on the porphyrin effect and influence of dopant ions on Thaumatococcus daniellii dye as sensitizer in dye-sensitized solar cells.

ABSTRACT: In this work, data on the effect of porphyrin characteristic of UV/VIS absorption of Thaumatococcus daniellii (T. daniellii) dye-sensitized solar cells sensitized with different electrolytes were presented. The influence of dopants from 1?g/100?ml electrolyte: distilled water and applied time difference of 3?min is observed on the photovoltaic characteristics and performance of the deposited thin film. The output efficiency and incident photon to conversion efficiency of T. daniellii dye-sensitized solar cells was acquired and could be further used as a model for designing dye-sensitized solar models as substitute for silicon solar cells.

SUBMITTER: Abodunrin TJ

PROVIDER: S-EPMC6172415 | biostudies-other | 2018 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Data on the porphyrin effect and influence of dopant ions on Thaumatococcus daniellii dye as sensitizer in dye-sensitized solar cells.

Abodunrin Temitope Jolaolu TJ Boyo Adenike Omotunde AO Usikalu Mojisola Rachael MR

Data in brief 20180912

In this work, data on the effect of porphyrin characteristic of UV/VIS absorption of Thaumatococcus daniellii (T. daniellii) dye-sensitized solar cells sensitized with different electrolytes were presented. The influence of dopants from 1 g/100 ml electrolyte: distilled water and applied time difference of 3 min is observed on the photovoltaic characteristics and performance of the deposited thin film. The output efficiency and incident photon to conversion efficiency of T. dani ...[more]

PMID: 30306108

Similar Datasets

Natural sensitizer extracted from Mussaenda erythrophylla for dye-sensitized solar cell.

Project description:In this study, a natural dye from the flowers of Mussaenda erythrophylla extracted separately in ethanol and de-ionized water was employed as a photosensitizer in DSSCs. The quantitative phytochemical analyses were performed on both extracts. The existence of flavonoids (anthocyanin) and chlorophyll a pigments in the ethanol extract of the dye was confirmed by the UV-Visible spectroscopy. The stability study performed on the said ethanol extract confirmed that the dye extracted in ethanol was stable in the dark and did not degrade for nearly 50 days. The presence of the dye molecules and uniform adsorption of them on the P25-TiO2 surface were confirmed by fourier transform infrared spectroscopy and atomic force microscopy, respectively. Moreover, the influence of dye concentration and pH on the optical properties of the dye was also studied. The natural dye extracted in ethanol was employed in DSSCs, fabricated by utilizing the said dye sensitized P25-TiO2 photoanodes, [Formula: see text]/[Formula: see text] electrolyte, and Pt counter electrode. Photovoltaic performances of the fabricated devices were determined under simulated irradiation with the intensity of 100 mWcm-2 using AM 1.5 filter. The device fabricated with the P25-TiO2 photoanode sensitized by the dye extracted in ethanol at pH = 5 exhibited the best power conversion efficiency (PCE) of 0.41% with the JSC of 0.98 mAcm-2 which could be attributed to the optimum light absorption in the visible region of solar spectrum by the chlorophyll a and anthocyanin molecules in the extracted natural dye.

| S-EPMC10449896 | biostudies-literature

Porphyrin Dye-Sensitized Zinc Oxide Aggregated Anodes for Use in Solar Cells.

Project description:Porphyrin YD2-o-C8-based dyes were employed to sensitize room-temperature (RT) chemical-assembled ZnO aggregated anodes for use in dye-sensitized solar cells (DSSCs). To reduce the acidity of the YD2-o-C8 dye solution, the proton in the carboxyl group of a porphyrin dye was replaced with tetrabuthyl ammonium (TBA?) in this work. The short-circuit current density (Jsc) of the YD2-o-C8-TBA-sensitized ZnO DSSCs is higher than that of the YD2-o-C8-sensitized cells, resulting in the improvement of the efficiency of the YD2-o-C8-based ZnO DSSCs. With an appropriate incorporation of chenodeoxycholic acid (CDCA) as coadsorbate, the Jsc and efficiency of the YD2-o-C8-TBA-sensitized ZnO DSSC are enhanced due to the improvement of the incident-photon-to-current efficiency (IPCE) values in the wavelength range of 400-450 nm. Moreover, a considerable increase in Jsc is achieved by the addition of a light scattering layer in the YD2-o-C8-TBA-sensitized ZnO photoanodes. Significant IPCE enhancement in the range 475-600 nm is not attainable by tuning the YD2-o-C8-TBA sensitization processes for the anodes without light scattering layers. Using the RT chemical-assembled ZnO aggregated anode with a light scattering layer, an efficiency of 3.43% was achieved in the YD2-o-C8-TBA-sensitized ZnO DSSC.

| S-EPMC6273904 | biostudies-other

Significant Influence of a Single Atom Change in Auxiliary Acceptor on Photovoltaic Properties of Porphyrin-Based Dye-Sensitized Solar Cells.

Project description:The rational design of porphyrin sensitizers is always crucial for dye-sensitized solar cells (DSSCs), since the change of only a single atom can have a significant influence on the photovoltaic performance. We incorporated the pyridothiadiazole group, as a stronger electron-withdrawing group, into the commonly well-established skeleton of D-porphyrin-triple bond-acceptor sensitizers by a single atom change for a well-known strong electron-withdrawing benzothiadiazole (BTD) unit as an auxiliary acceptor. The impact of the pyridothiadiazole group on the optical; electrochemical; and photovoltaic properties of D???A porphyrin sensitizers was investigated with comparison for a benzothiadiazole-substituted SGT-020 porphyrin. The pyridothiadiazole-substituted SGT-024 porphyrin dye was red-shifted so that the absorption range might be expected to achieve higher light harvest efficiency (LHE) than the SGT-020 porphyrin. However, all the devices were fabricated by utilizing SGT-020 and SGT-024, evaluated and found to achieve a cell efficiency of 10.3% for SGT-020-based DSSC but 4.2% for SGT-024-based DSSC under standard global AM 1.5G solar light conditions. The main reason is the lower charge collection efficiency of SGT-024-based DSSC than SGT-020-based DSSC, which can be attributed to the tilted dye adsorption mode on the TiO? photoanode. This may allow for faster charge recombination, which eventually leads to lower Jsc, Voc and power conversion efficiency (PCE).

| S-EPMC6316492 | biostudies-literature

Influence of Tin Doped TiO2 Nanorods on Dye Sensitized Solar Cells.

Project description:The one-step hydrothermal method was used to synthesize Sn-doped TiO2 (Sn-TiO2) thin films, in which the variation in Sn content ranged from 0 to 7-wt % and, further, its influence on the performance of a dye-sensitized solar cell (DSSC) photoanode was studied. The deposited samples were analyzed by X-ray diffraction (XRD) and Raman spectroscopy, which confirmed the existence of the rutile phase of the synthesized samples with crystallite size ranges in between 20.1 to 22.3 nm. In addition, the bare and Sn-TiO2 thin films showed nanorod morphology. A reduction in the optical band gap from 2.78 to 2.62 eV was observed with increasing Sn content. The X-ray photoelectron spectroscopy (XPS) analysis confirmed Sn4+ was successfully replaced at the Ti4+ site. The 3-wt % Sn-TiO2 based DSSC showed the optimum efficiency of 4.01%, which was superior to 0.87% of bare and other doping concentrations of Sn-TiO2 based DSSCs. The present work reflects Sn-TiO2 as an advancing material with excellent capabilities, which can be used in photovoltaic energy conversion devices.

| S-EPMC8585088 | biostudies-literature

3D hierarchical rutile TiO2 and metal-free organic sensitizer producing dye-sensitized solar cells 8.6% conversion efficiency.

Project description:Three-dimensional (3D) hierarchical nanoscale architectures comprised of building blocks, with specifically engineered morphologies, are expected to play important roles in the fabrication of 'next generation' microelectronic and optoelectronic devices due to their high surface-to-volume ratio as well as opto-electronic properties. Herein, a series of well-defined 3D hierarchical rutile TiO2 architectures (HRT) were successfully prepared using a facile hydrothermal method without any surfactant or template, simply by changing the concentration of hydrochloric acid used in the synthesis. The production of these materials provides, to the best of our knowledge, the first identified example of a ledgewise growth mechanism in a rutile TiO2 structure. Also for the first time, a Dye-sensitized Solar Cell (DSC) combining a HRT is reported in conjunction with a high-extinction-coefficient metal-free organic sensitizer (D149), achieving a conversion efficiency of 5.5%, which is superior to ones employing P25 (4.5%), comparable to state-of-the-art commercial transparent titania anatase paste (5.8%). Further to this, an overall conversion efficiency 8.6% was achieved when HRT was used as the light scattering layer, a considerable improvement over the commercial transparent/reflector titania anatase paste (7.6%), a significantly smaller gap in performance than has been seen previously.

| S-EPMC5385835 | biostudies-literature

Theoretical design of porphyrin sensitizers with different acceptors for application in dye-sensitized solar cells.

Project description:Using density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods, three porphyrin dyes with different acceptors, such as carboxylic acid, cyanoacrylic acid, and 2-cyano-N-hydroxyacrylamide, have been designed. Compared to the best sensitizer (YD2-o-C8) so far, these designed dyes have small highest occupied orbital to lowest unoccupied orbital (HOMO-LUMO) band gaps, and wide absorptions with large oscillator strength at porphyrin Q bands. And the designed Dye1 is similar to YD2-o-C8 in electronic coupling with TiO2, while improved Dye2 and Dye3 are better than YD2-o-C8, thus, Dye2 and Dye3 will be much faster for electron injection in dye-sensitized solar cell systems based on their long-term stable and efficient anchor groups. All these features show that our designed dyes, especially Dye2 and Dye3, have better absorption performance and faster electron injection. In addition, our results point out that 2-cyano-N-hydroxyacrylamide is a new promising acceptor. This study is expected to assist the molecular design of new efficient dyes for the advancement of dye-sensitized solar cells.

| S-EPMC9080764 | biostudies-literature

The dye-sensitized solar cell database.

Project description:BackgroundDye-sensitized solar cells (DSSCs) have garnered a lot of attention in recent years. The solar energy to power conversion efficiency of a DSSC is influenced by various components of the cell such as the dye, electrolyte, electrodes and additives among others leading to varying experimental configurations. A large number of metal-based and metal-free dye sensitizers have now been reported and tools using such data to indicate new directions for design and development are on the rise.DescriptionDSSCDB, the first of its kind dye-sensitized solar cell database, aims to provide users with up-to-date information from publications on the molecular structures of the dyes, experimental details and reported measurements (efficiencies and spectral properties) and thereby facilitate a comprehensive and critical evaluation of the data. Currently, the DSSCDB contains over 4000 experimental observations spanning multiple dye classes such as triphenylamines, carbazoles, coumarins, phenothiazines, ruthenium and porphyrins.ConclusionThe DSSCDB offers a web-based, comprehensive source of property data for dye sensitized solar cells. Access to the database is available through the following URL: www.dyedb.com .

| S-EPMC5882482 | biostudies-literature

Influence of electrolyte co-additives on the performance of dye-sensitized solar cells.

Project description:The presence of specific chemical additives in the redox electrolyte results in an efficient increase of the photovoltaic performance of dye-sensitized solar cells (DSCs). The most effective additives are 4-tert-butylpyridine (TBP), N-methylbenzimidazole (NMBI) and guanidinium thiocyanate (GuNCS) that are adsorbed onto the photoelectrode/electrolyte interface, thus shifting the semiconductor's conduction band edge and preventing recombination with triiodides. In a comparative work, we investigated in detail the action of TBP and NMBI additives in ionic liquid-based redox electrolytes with varying iodine concentrations, in order to extract the optimum additive/I2 ratio for each system. Different optimum additive/I2 ratios were determined for TBP and NMBI, despite the fact that both generally work in a similar way. Further addition of GuNCS in the optimized electrolytic media causes significant synergistic effects, the action of GuNCS being strongly influenced by the nature of the corresponding co-additive. Under the best operation conditions, power conversion efficiencies as high as 8% were obtained.

| S-EPMC3211393 | biostudies-literature

How Reproducible are Electrochemical Impedance Spectroscopic Data for Dye-Sensitized Solar Cells?

Project description:Dye-sensitized solar cell (DSC) technology has been broadly investigated over the past few decades. The sandwich-type structure of the DSC makes the manufacturing undemanding under laboratory conditions but results in the need for reproducible measurements for acceptable DSC characterization. Electrochemical impedance spectroscopy (EIS) offers the possibility to study complex electronic systems and is commonly used for solar cells. There is a tendency in the literature to present impedance data only for one representative device. At the same time, as current density-voltage plots illustrate, measurements can vary within one set of DSCs with identical components. We present multiple DSC impedance measurements on "identical" devices prepared using two different dyes and present a statistical analysis regarding the reproducibility.

| S-EPMC7178167 | biostudies-literature

Assembly, charge-transfer and solar cell performance with porphyrin-C60 on NiO for p-type dye-sensitized solar cells.

Project description:A series of zinc tetraphenylporphyrin photosensitizers furnished with three different anchoring groups, benzoic acid, phenylphosphonate and coumarin-3-carboxylic acid, were prepared using 'click' methodology. All three gave modest performances in liquid junction devices with I3-/I- as the electrolyte. The distinct spectroscopic properties of the porphyrins allowed a detailed investigation of the adsorption behaviour and kinetics for charge transfer at the NiO|porphyrin interface. The adsorption behaviour was modelled using the Langmuir isotherm model and the phosphonate anchoring group was found to have the highest affinity for NiO (6.65 × 104 M-1) and the fastest rate of adsorption (2.46 × 107 cm2 mol-1 min-1). The photocurrent of the p-type dye-sensitized solar cells increased with increasing dye loading and corresponding light harvesting efficiency of the electrodes. Coordinating the zinc to a pyridyl-functionalized fullerene (C60PPy) extended the charge-separated state lifetime from ca 200 ps to 4 ns and a positive improvement in the absorbed photon to current conversion efficiency was observed. Finally, we confirmed the viability of electron transfer from the appended C60PPy to phenyl-C61-butyric acid methyl ester, a typical electron transporting layer in organic photovoltaics. This has implications for assembling efficient solid-state tandem solar cells in the future. This article is part of a discussion meeting issue 'Energy materials for a low carbon future'.

| S-EPMC6635627 | biostudies-literature