Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Boron Removal from Mining and Synthetic Effluents by Electrocoagulation Using Aluminum Electrodes.

ABSTRACT: The efficiency of the electrocoagulation method to remove boron from synthetic and mining effluents was investigated in this study. Different parameters were tested using boric acid solution and effluent collected from a mining company located in the city of Vitória-ES. The results showed a percentage of boron removal of over 60% for the synthetic and mining effluents, using aluminum electrodes, pH 7.5, current density of 14.82 mA cm-2, and supporting electrolyte of 0.200 mol L-1. The electrocoagulation and chemical coagulation methods were also compared, in which the percentage obtained by electrocoagulation was 56.30% higher for the mining effluent. Thus, electrocoagulation was more efficient in boron removal, especially when appropriate parameters are applied.

SUBMITTER: da Silva DML

PROVIDER: S-EPMC6532284 | biostudies-other | 2019

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Boron Removal from Mining and Synthetic Effluents by Electrocoagulation Using Aluminum Electrodes.

da Silva Douglas Mark Lopes DML Carneiro Maria Tereza W D MTWD Ribeiro Josimar J

TheScientificWorldJournal 20190509

The efficiency of the electrocoagulation method to remove boron from synthetic and mining effluents was investigated in this study. Different parameters were tested using boric acid solution and effluent collected from a mining company located in the city of Vitória-ES. The results showed a percentage of boron removal of over 60% for the synthetic and mining effluents, using aluminum electrodes, pH 7.5, current density of 14.82 mA cm<sup>-2</sup>, and supporting electrolyte of 0.200 mol L<sup>-1 ...[more]

PMID: 31210754

Similar Datasets

Bio-zeolite use for metal removal from copper-containing synthetic effluents.

Project description:The adsorption capacity of biologically modified zeolite with respect to copper-containing effluents (Cu(II)-Fe(III), Cu(II)-Fe(III)-Ni(II), Cu(II)-Fe(II)-Zn(II), and Cu(II)-Fe(II)-Ni(II)-Zn(II)) has been investigated in order to apply it for industrial effluents treatment. Obtained bio-zeolite was characterized using neutron activation analysis, confocal laser scanning microscopy, and scanning electron microscopy. The efficiency of metal ions removal was determined as a function of pH, copper concentration, time, and temperature. The metal sorption in analyzed systems showed to be pH-dependent. The equilibrium adsorption data were interpreted using Freundlich and Langmuir isotherms and the adsorption mechanism was investigated by kinetic studies. The sorption of Cu(II) and Zn(II) fitted well pseudo-first and pseudo-second-order models, while Ni(II) sorption was better described by the Elovich model. The thermodynamic parameters, ∆G°, ∆H°, and ∆S were evaluated to understand the nature of the sorption process. Obtained results show that bio-zeolite is of interest for heavy metal ions removal from industrial effluents.Supplementary informationThe online version contains supplementary material available at 10.1007/s40201-021-00694-x.

| S-EPMC8617158 | biostudies-literature

Kinetic study of removal heavy metal from aqueous solution using the synthetic aluminum silicate.

Project description:One of the problems that most affect humanity today is the wastewater discharge into different water bodies. It was estimated that more than 7 million tons of wastewater are generated worldwide and are discharged into rivers, lakes, and reservoirs. Among the most dangerous wastewaters are those from inorganic chemistry research laboratories, mainly due to heavy metals. These problems have become a highly relevant topic, and numerous researchers have tried to design wastewater treatment systems that will deal more efficiently with heavy metals elimination. In this work, the synthesis, characterization, and evaluation of hydrated aluminium silicate were performed as alternative wastewater treatment from chemistry research and teaching laboratories. The compound obtained was [Formula: see text], which was characterized by the determination of its physicochemical properties. These revealed a low density, very porous material, with low crystallinity, strong chemical resistance, a large surface area, and a high apparent ionic exchange capacity. Absorption kinetics studies of heavy metals in aqueous solutions, through more widespread models, have demonstrated that [Formula: see text] has excellent properties as absorbents of this material. The amorphous hydrated aluminium silicate achieves a decrease in the concentration of all the metal ions studied, reducing them to discharge levels permissible.

| S-EPMC7331683 | biostudies-literature

Metal Removal from Nickel-Containing Effluents Using Mineral-Organic Hybrid Adsorbent.

Project description:Nickel is one of the most dangerous environmental pollutants and its removal from wastewater is an important task. The capacity of a mineral-organic hybrid adsorbent, consisting of Shewanella xiamenensis biofilm and zeolite (clinoptilolite of the Chola deposit), to remove metal ions from nickel-containing batch systems under different experimental conditions was tested. The obtained biosorbent was characterized using neutron activation, SEM, and FTIR techniques. It was established that maximum removal of cations, up to 100%, was achieved at pH 6.0. Several mathematical models were applied to describe the equilibrium and kinetics data. The maximum adsorption capacity of the hybrid biosorbent, calculated using the Langmuir model, varied from 3.6 to 3.9 mg/g. Negative Gibbs energy values and positive ∆H° values indicate the spontaneous and endothermic character of the biosorption process. The effects of several parameters (pH and biosorbent dosage) on Ni(II) removal from real effluent, containing nickel with a concentration of 125 mg/L, were investigated. The optimal pH for Ni(II) removal was 5.0-6.0 and an increase of sorbent dosage from 0.5 to 2.0 led to an increase in Ni(II) removal from 17% to 27%. At two times effluent dilution, maximum Ni(II) removal of 26% was attained at pH 6.0 and sorbent dosage of 1.0 g. A 12-fold effluent dilution resulted in the removal of 72% of Ni(II) at the same pH and sorbent dosage values. The obtained hybrid biosorbent can be used for Ni(II) removal from industrial effluents with low Ni(II) concentrations.

| S-EPMC7578995 | biostudies-literature

Data on treatment of sewage wastewater by electrocoagulation using punched aluminum electrode and characterization of generated sludge.

Project description:The electrocoagulation setup must be optimized in order to design an economically feasible process. Therefore, in this work, the effect of the punched aluminum electrode on the performance of the electrocoagulation (EC) has been investigated. A series of experiments were performed for treatment of sewage wastewater using plane electrode and compare with punched electrodes. Effect of contact time, voltage, electrode spacing and stirring speed has been optimized for removal of Biochemical oxygen demand (BOD) and Total dissolved solids (TDS). It was observed that the performance of electrocoagulation process increased using punched electrode. Also, the less operating cost noticed in punched electrode as compared to a plane electrode for (70-80%) removal of BOD and TDS. These data would be useful in designing of an EC reactor to obtain high removal efficiency at low energy consumption.

| S-EPMC6058665 | biostudies-literature

Efficient removal of norfloxacin from water using batch airlift-electrocoagulation reactor: optimization and mechanisms analysis.

Project description:In this study, we developed an airlift-electrocoagulation (AL-EC) reactor to remove norfloxacin (NOR) from water. Six parameters influencing NOR removal were investigated, and the possible removal mechanism was proposed based on flocs characterization and intermediates analysis. The performances for treating different antibiotics and removing NOR from 3 types of water were also evaluated. The best NOR removal efficiency was obtained with the iron anode and aluminum cathode combination, a current density of 2 mA cm-2, an initial pH of 7, a treatment time of 32 minutes and an air flow rate of 200 mL min-1, the supporting electrolyte type was NaCl, and the initial NOR concentration was 10 mg L-1. Flocs adsorption and electrochemical oxidation were the main ways to remove NOR from water. The average removal efficiency of the AL-EC reactor exceeded 60% of the different antibiotic concentrations in artificial and real water. The highest NOR removal rate reached 93.48% with an operating cost of 0.153 USD m-3. The present work offers a strategy for NOR removal from water with high efficiency and low cost, showing a huge potential for the application of the AL-EC in antibiotic contaminated water treatment.

| S-EPMC10021078 | biostudies-literature

Efficient Removal of Metals from Synthetic and Real Galvanic Zinc-Containing Effluents by Brewer's Yeast Saccharomyces cerevisiae.

Project description:The performance of the brewer's yeast Saccharomyces cerevisiae to remove metal ions from four batch systems, namely Zn(II), Zn(II)-Sr(II)-Cu(II), Zn(II)-Ni(II)-Cu(II), and Zn(II)-Sr(II)-Cu(II)-Ba(II), and one real effluent was evaluated. Yeast biosorption capacity under different pH, temperature, initial zinc concentration, and contact time was investigated. The optimal pH for removal of metal ions present in the analyzed solution (Zn, Cu, Ni, Sr, and Ba) varied from 3.0 to 6.0. The biosorption process for zinc ions in all systems obeys Langmuir adsorption isotherm, and, in some cases, the Freundlich model was applicable as well. The kinetics of metal ions biosorption was described by pseudo-first-order, pseudo-second-order, and Elovich models. Thermodynamic calculations showed that metal biosorption was a spontaneous process. The two-stage sequential scheme of zinc ions removal from real effluent by the addition of different dosages of new sorbent allowed us to achieve a high efficiency of Zn(II) ions removal from the effluent. FTIR revealed that OH, C=C, C=O, C-H, C-N, and NH groups were the main biosorption sites for metal ions.

| S-EPMC7475842 | biostudies-literature

Electro-conversion of cumene into acetophenone using boron-doped diamond electrodes

Project description:A straightforward electro-conversion of cumene into acetophenone has been reported using boron-doped diamond (BDD) electrodes. This particular conversion is driven by the addition reaction of a cathodically generated hydroperoxide anion to an anodically generated cumyl cation, where the BDD’s wide potential window enables the direct anodic oxidation of cumene into the cumyl cation. Since electricity is directly employed as the oxidizing and reducing reagents, the present protocol is easy to use, suitable for scale-up, and inherently safe.

| S-EPMC9475189 | biostudies-literature

Synthesis of Co-Fe 1D Nanocone Array Electrodes Using Aluminum Oxide Template.

Project description:Porous anodic alumina oxide (AAO) obtained via two-step anodization is a material commonly used as a template for fabricating 1D nanostructures. In this work, copper and cobalt-iron 1D nanocones were obtained by an electrodeposition method using AAO templates. The templates were produced using two-step anodization in H2C2O4. The Co-Fe nanostructures are characterized by homogeneous pore distribution. The electrocatalytic activity of the produced nanomaterials was determined in 1 M NaOH using the linear sweep voltammetry (LSV) and chronopotentiometry (CP) methods. These materials can be used as catalysts in the water-splitting reaction. The sample's active surface area was calculated and compared with bulk materials.

| S-EPMC8036432 | biostudies-literature

Improved blackwater disinfection using potentiodynamic methods with oxidized boron-doped diamond electrodes.

Project description:Electrochemical disinfection (ECD) has become an important blackwater disinfection technology. ECD is a promising solution for the 2 billion people without access to conventional sanitation practices and in areas deficient in basic utilities (e.g., sewers, electricity, waste treatment). Here, we report on the disinfection of blackwater using potential cycling compared to potentiostatic treatment methods in chloride-containing and chloride-free solutions of blackwater (i.e., untreated wastewater containing feces, urine, and flushwater from a toilet). Potentiodynamic treatment is demonstrated to improve disinfection energy efficiency of blackwater by 24% and 124% compared to static oxidation and reduction methods, respectively. The result is shown to be caused by electrochemical advanced oxidation processes (EAOP) and regeneration of sp2-surface-bonded carbon functional groups that serve the dual purpose of catalysts and adsorption sites of oxidant intermediates. Following 24 h electrolysis in blackwater, electrode fouling is shown to be minimized by the potential cycling method when compared to equivalent potentiostatic methods. The potential cycling current density is 40% higher than both the static oxidative and reductive methods. This work enhances the understanding of oxygen reduction catalysts using functionalized carbon materials and electrochemical disinfection anodes, both of which have the potential to bring a cost-effective, energy efficient, and practical solution to the problem of disinfecting blackwater.

| S-EPMC5995412 | biostudies-literature

Continuous and selective measurement of oxytocin and vasopressin using boron-doped diamond electrodes.

Project description:The electrochemical detection of oxytocin using boron-doped diamond (BDD) electrodes was studied. Cyclic voltammetry of oxytocin in a phosphate buffer solution exhibits an oxidation peak at +0.7?V (vs. Ag/AgCl), which is attributable to oxidation of the phenolic group in the tyrosyl moiety. Furthermore, the linearity of the current peaks obtained in flow injection analysis (FIA) using BDD microelectrodes over the oxytocin concentration range from 0.1 to 10.0??M with a detection limit of 50?nM (S/N?=?3) was high (R(2)?=?0.995). Although the voltammograms of oxytocin and vasopressin observed with an as-deposited BDD electrode, as well as with a cathodically-reduced BDD electrode, were similar, a clear distinction was observed with anodically-oxidized BDD electrodes due to the attractive interaction between vasopressin and the oxidized BDD surface. By means of this distinction, selective measurements using chronoamperometry combined with flow injection analysis at an optimized potential were demonstrated, indicating the possibility of making selective in situ or in vivo measurements of oxytocin.

| S-EPMC5013270 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data