Identification of novel DVL3 cancer-associated target genes [RNA-seq]
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE165773 | GEO | 2021/04/16
REPOSITORIES: GEO
Similar Datasets
Project description:The goal of this study is to investigate the differential transcripted genes affected by CRISPR induced endoglin knockout in PASMC cells. Total RNA was purified from NTC or ENG-/- PASMC cells using RNeasy Mini Kit (Qiagen, Hilden, Germany). RNA quality and concentration were assessed with Agilent Tapestation 200 (Agilent Technologies) and Qubit 2.0 (ThermoFisher Scientific). ~250-500 ng RNA were used for library construction. The NGS libraries were constructed using the KAPA Stranded mRNA-Seq Kits (KapaBioSystems). mRNA was captured using magnetic oligo-dT beads and 1st strand cDNA was synthesized using random priming. In order to preserve strand-specificity, 2nd strand synthesis, which converts the cDNA:RNA hybrid to double-stranded cDNA (dscDNA), was marked by dUTP incorporation. cDNA framents were A-tailed by adding dAMP to the 3'-ends of the dscDNA library fragments. dsDNA Illumina TruSeq "forkedâ adapters 3'-dTMP overhangs were then ligated to A-tailed library insert fragments. Each of the six libraries were ligated with a unique Truseq 6bp barcode. Library fragments were amplified using the KAPA HiFi HotStart polymerase. The strand marked with dUTP was not amplified, allowing strand-specific sequencing. Fragment length and library quality was assessed on a 2100 Bioanalyzer using the High Sensitivity DNA Kit (Agilent Technologies). Libraries were diluted to 10nM and pooled at equimolar ratios. The pool was then diluted to 2nM and denatured in NaOH following Illumina recommendations. 10pM of denatured library pool was loaded in one HiSeq lane and flowcell was clustered on the Illumina C-bot. 5% PhiX control was spiked-in. The flowcell was sequenced on a HiSeq 2500 V4 chemistry with 50bp Single read protocol. Data was demultiplexed and Fastq files were generated using BcptoFastq 1.8.4 script provided by Illumina.
2017-05-16 | E-GEOD-78271 | biostudies-arrayexpress
Project description:The RNA-seq library preparation was performed for H357 CisR Nt Sh and H357 CisR CMTM6 shRNA treated with vehicle control (UT) and cisplatin (10 μM) (CisT) for 24 h. We have included two independent biological replicates to identify the CMTM6 downregulation mediated global transcriptome changes. For RNA-seq library preparation 2 μg of total RNA was used to isolate mRNA through magnetic beads using mRNA isolation kit (PolyA mRNA isolation Module, NEB) followed by RNA-seq library preparation using mRNA library preparation kit (NEB) strictly following the vendor recommended protocol. After library preparation concentration of libraries was estimated using qubit 2.0 (Invitrogen) and the recommended fragmentation sizes were confirmed by Tapestation (Agilent).
2021-02-08 | E-MTAB-9424 | biostudies-arrayexpress
Project description:Acute kidney injury (AKI) is an important contributor to the development of chronic kidney disease (CKD). We performed miRNA and mRNA sequencing on biobanked human kidney tissues obtained in the routine clinical care of patients with the diagnoses of AKI and minimal change disease (MCD), in addition to nephrectomized (Ref) tissue from individuals without known kidney disease. From all renal biopsy samples, 2 cryosections (10 μM) including the entire cross-section of the tissue were placed directly into PicoPure RNA extraction buffer. RNA was isolated using the PicoPure isolation kit. Total RNA was evaluated for quantity and quality using an Agilent Bioanalyzer. Approximately 10 ng of total RNA were used for each sample’s library preparation. Ribosomal RNA was removed using RiboGone – Mammalian Kit protocol. After rRNA depletion, double-stranded cDNA was synthesized and amplified using the SMARTer Universal Low Input RNA Kit protocol. The cDNA was sheared by Covaris, and the library was prepared and barcoded following the Ion Plus Fragment Library Kit protocol. Each resulting barcoded library was quantified and quality assessed by Agilent Bioanalyzer. Multiple libraries were pooled in equal molarity. Finally, 8 μL of 100 pM pooled libraries were loaded into lanes of an Illumina HiSeq 4000. At least 30M reads per library were generated.
2024-07-11 | GSE246204 | GEO
Project description:Purpose: We used GAS as a model bacterial pathogen to investigate the complex relationship between genome, transcriptome, and virulence in a large population of type emm28 strains recovered from humans over 26 years in geographically diverse locations. Methods: We chose a subset of isolates from the sequenced population of 2,101 emm28 strains that would approximately span the genetic variation present in the entire population. 442 emm28 strains grown as singleton cultures and harvested at one time point (early-stationary phase), and libraries were prepared using RNAtag-seq. Quality of the total RNA, rRNA-depleted RNA, and cDNA libraries was evaluated with RNA Nano, RNA Pico, and DNA high-sensitivity kits (Agilent Technologies), respectively, using an Agilent 2100 Bioanalyzer. For each sample, the cDNA library concentration was measured fluorometrically with Qubit™ dsDNA HS assay kits (Invitrogen). The cDNA libraries were diluted, pooled, and sequenced with an Illumina NextSeq 500 instrument.
2018-12-31 | GSE113055 | GEO
Project description:We used snRNA-seq to investigate an entire adult mammalian heart of BL6 mice. Whole hearts were harvested from 4 male mice (12 weeks) after cervical dislocation. The hearts were pooled and nuclei isolated using the Nuclei PURE Prep isolation kit (Sigma-Aldrich, Darmstadt, Germany) according to the manufacturer’s protocol. Sequencing was conducted by Genewiz (Leipzig, Germany) on the 10xGenomics system. Single nuclei were captured in droplet emulsions and snRNA-seq libraries were constructed as per the 10x Genomics protocol using GemCode Single-Cell 3′ Gel Bead and Library V3 Kit. RNA was controlled for sufficient quality on an Agilent 2100 Bioanalyzer system and quantified using a Qubit Fluorometer.
2020-03-16 | E-MTAB-8848 | biostudies-arrayexpress
Project description:Purpose: Next-generation sequencing (NGS) has revolutionized systems-based analysis of cellular pathways. The goals of this study are to compare adhesion gene clusters and clock genes / biomarkers at different time points throughout the day in sorted murine lympahtic endothelial cells. Methods: RNA of sorted dermal LECs harvested in TriZol-LS was purified using Direct-zol RNA mini Prep Kit (ZymoResearch) following manufacturer’s instructions. Isolated RNA was quantified using the Nanodrop (Thermofisher) and analyzed on a Bioanalyzer (Agilent) using the RNA 6000 Nano or Pico Kit (Agilent). 75 ng of eluted total RNA was digested with DNase (Thermofisher) to remove DNA contaminations. An additional purification step with RNAClean XP Beads (Agencourt) was performed. The purified, bead-bound RNA was directly used as input in the SMART-Seq v4 Ultra Low Input RNA Kit (TaKaRA Bio). Full-length cDNA was generated following manufacturer’s instructions. Full-length cDNA was quantified using the Qubit dsDNA HS Assay Kit (Invitrogen) with the Qubit fluorometer. Finally, sequencing libraries were generated using 500 pg full-length cDNA following the NexteraXT protocol (Illumina). Libraries were quantified on a Bioanalyzer (Agilent) using the DNA 1000 Kit (Agilent) and sequenced on a HiSeq1500 system (Illumina) with a readlength of 100 nt, single-end mode. Results: obtained transcriptome profiles were processed on a Galaxy web interface hosted by LAFUGA (Gene Center, Munich). After demultiplexing and trimming data was mapped against the mouse genome (mm10) using RNA-STAR mapper (Galaxy Version 2.5.2b-0). Abundant reads were counted using HTSeq-count (Galaxy Version 1.0.0). Afterwards, gene expression analysis to detect differentially expressed genes was performed using DESeq2 (Galaxy Version 2.11.40.6), setting the false discovery rate (FDR) <0.05. Comparing the expression profiles and the enrichment of gene ontology cluster adhesion revealed a highly time-of-day dependent expression profile of genes. Conclusions: Our study represents the first detailed analysis of time-of-day dependent lymphatic endothelial cell transcriptomes, with respect to adhesion and clock genes. This will provide valid input into chronotherapy, timed delivery of substances and new therapeutic avenues.
2021-09-27 | GSE184758 | GEO
Project description:Purpose: to study the transcriptional changes that are induced by activating NR2F1 using an agonist (C26) that we developed. Methods: T-HEp3-GFP cells were pretreated with DMSO or 0.5 µM C26 for 6 days then inoculated on CAM and treated every 24 hours. After 7 days, tumors were collected and dissociated into single cells. FACS was used to isolate T-Hep3 tumor cells using GFP. RNA was extracted from fresh frozen cell pellets using Qiagen RNeasy Plus Universal mini kit following manufacturer’s instructions (Qiagen, Hilden, Germany). RNA samples received were quantified using Qubit 2.0 Fluorometer (Life Technologies, Carlsbad, CA, USA) and RNA integrity was checked using Agilent TapeStation 4200 (Agilent Technologies, Palo Alto, CA, USA). RNA sequencing libraries were prepared using the NEBNext Ultra RNA Library Prep Kit for Illumina following manufacturer’s instructions (NEB, Ipswich, MA, USA). Briefly, mRNAs were first enriched with Oligo(dT) beads. Enriched mRNAs were fragmented for 15 minutes at 94°C. First strand and second strand cDNAs were subsequently synthesized. cDNA fragments were end repaired and adenylated at 3’ ends, and universal adapters were ligated to cDNA fragments, followed by index addition and library enrichment by limited-cycle PCR. The sequencing libraries were validated on the Agilent TapeStation (Agilent Technologies, Palo Alto, CA, USA), and quantified by using Qubit 2.0 Fluorometer (Invitrogen, Carlsbad, CA) as well as by quantitative PCR (KAPA Biosystems, Wilmington, MA, USA). The sequencing libraries were clustered on 1 lane of a flowcell. After clustering, the flowcell was loaded on the Illumina HiSeq instrument (4000 or equivalent) according to manufacturer’s instructions. The samples were sequenced using a 2x150bp Paired End (PE) configuration. Image analysis and base calling were conducted by the HiSeq Control Software (HCS). Raw sequence data generated from Illumina HiSeq was converted into fastq files and de-multiplexed using Illumina's bcl2fastq 2.17 software. One mismatch was allowed for index sequence identification. Three replicate samples per group were used . R (v.4.0.3) was used to perform bioinformatics analysis. Quality control was performed using FastQC (v0.11.8). Trim Galore! (version 0.6.5) was used to trim the adapter sequences with a quality threshold of 20. The human genome reference used was GRCh38.p13 and GENCODE release 36. Alignment was performed using STAR aligner (v2.7.5b). Gene level read counts were obtained by using Salmon (v1.2.1) for all libraries . All samples passed the quality control requirements with > 60% of reads uniquely mapping (>20M uniquely mapped reads for each library) using STAR. Differential expression analysis was performed using the gene level read counts and the DESeq2 (v1.28.1) R package. Heatmaps show the z-scores of gene-level read counts and were generated using heatmaply (v1.1.0). Genes with adjusted p-value less than 0.05 were considered differentially expressed.
2021-04-02 | GSE171353 | GEO
Project description:Purpose: The study aimed to characterize the molecular phenotype of bone marrow macrophages in NHL with RNA sequencing analysis. Methods:RNA of sorted femur macrophages (CD11b+F4/80+) were extracted with an RNA extraction kit (Qiagen). The samples were submitted to Novogene Inc. for library preparation and subsequent RNA sequencing. RNA was used for cDNA library construction using an NEBNext® Ultra RNA Library Prep Kit for Illumina® (New England Biolabs) according to the manufacturer’s protocol. The resulting 250-350 bp insert libraries were quantified using a Qubit 2.0 fluorometer (Thermo Fisher Scientific) and quantitative PCR. Size distribution was analyzed using an Agilent 2100 Bioanalyzer (Agilent Technologies). Qualified libraries were sequenced on an Illumina HiSeq 4000 Platform (Illumina) using a paired-end 150 run (2×150 bases). Reads containing adapter or poly-N and those of low quality were trimmed, after which gene counts were obtained though mapping the clean reads to reference genome mm10 using STAR 2.5.3a.
2021-12-12 | GSE190598 | GEO
Project description:The RNA-seq library preparation was performed on H357 CisS at 0 month,H357 CisR at 4 months, and H357 CisR at 8 months whereas CisR represent Cisplatin drug resistance and CisS denote sensitive to Cisplatin. Additional, we also performed gene specific knockdown on H357CisR 8 months RRPB1 Sh. In experiment, We have added two independent biological replicates of each samples to understand the role of causative factor for cisplatin resistance at transcriptomic level. Total RNA isolated from above mentions experiment and 2 μg of RNA was used to prepared library. The mRNA was isolated through magnetic beads using mRNA isolation kit (PolyA mRNA isolation Module, NEB) followed by RNA-seq library preparation using mRNA library preparation kit (NEB) strictly following the vendor recommended protocol. After library preparation concentration of libraries was estimated using qubit 2.0 (Invitrogen) and the recommended fragmentation sizes were confirmed by Tapestation (Agilent).
2020-12-31 | E-MTAB-9697 | biostudies-arrayexpress
Project description:We developed a high-throughput mutagenesis screen to comprehensively identify the cis-regulatory elements that control a target splicing event from the MST1R gene that codes for the RON receptor tyrosine kinase. Skipping of alternative exon 11 results in a constitutively active isoform that promotes epithelial to mesenchymal transition and thereby contributes to the invasive phenotype of tumors. First, we created a library of mutated minigenes via mutagenic PCR. Importantly, the reverse primer introduced a random barcode sequence which labels the associated mutations. Next, the plasmid library was transfected as a pool and depending on the mutations, the transcripts exhibit changes in alternative splicing. The minigene library and the splicing outcome were analyzed by next-generation sequencing and subsequent integration of the datasets resulted in a map of splicing regulatory sites. The RNA-seq experiment was performed to quantify the transcript isoforms and sequence their associated barcodes in order to characterize the splicing outcome of the minigene library in HEK293T cells. For preparation of high-throughput RNA sequencing (RNA-seq) libraries, the total RNA obtained from transfected HEK293T cells was enriched for mRNA by performing polyA selection of 20 µg of total RNA using Dynabeads® Oligo (dT)25 beads (Invitrogen) according to the manufacturer’s protocol. Reverse transcription was carried out using 500 ng of enriched mRNA under the abovementioned conditions. To prevent the formation of chimeric amplicons, the libraries were amplified using emulsion PCR (PMID: 16791213), with Phusion DNA Polymerase (NEB) and either cDNA derived from polyA-selected RNA in the case of RNA-seq or plasmid DNA of the minigene library in the case of high-throughput DNA sequencing (DNA-seq). To amplify fragments for RNA-seq, the following primers containing Illumina sequencing adaptors were used: 5′-CAAGCAGAAGACGGCATACGAGATCGGTCTCGGCATTCCTGCTGAACCGCTCTTCCGATCTNNNNNNNNNNGTTCCACTGAAGCCTGAG-3′ (forward primer) and 5′-AATGATACGGCGACCACCGAGATCTACACTCTTTCCCTACACGACGCTCTTCCGATCTNNNNNNNNNNATAGAATAGGGCCCTCTAGA-3′ (reverse primer). PCR products were purified using Agencourt AMPure XP beads (Beckman Coulter). Purified products were first analysed with the TapeStation 2200 capillary gel electrophoresis instrument (Agilent) and then fluorimetrically quantified using a Qubit fluorimeter (Thermo Scientific). Sequencing was carried out on the Illumina MiSeq platform using paired-end reads of 300 nt length and a 10% PhiX spike-in to increase sequence complexity.
2018-06-27 | E-MTAB-6216 | biostudies-arrayexpress