Dataset Information

(ratio exp) LAT3YF CD5+ gamma delta T cells

ABSTRACT: ratio experiment by combining dye-reversal ratio profiles CD4+ alpha beta T cells were positively sorted from LatY136F or from wild-type spleen using a MACS and anti-CD4 beads. Gamma delta T cells were sorted from the spleen of Lat3YF and of Eb-/- mice using MACS and anti-CD5 beads. In vitro differentiated Th1 and Th2 cells were generated by culturing naive wild-type CD4+ T cells for 4 days in complete RPMI in the presence of anti-CD3 (1 µg/ml) plus anti-CD28 (1 µg/ml) with the addition of IL-12 (10ng/ml) and of anti-IL-4 (5µg/ml) for Th1-polarizing conditions, and of IL-4 (20ng/ml) plus anti-IFN-gamma (10µg/ml) for Th2-polarizing conditions. RNA was prepared using the Trizol method followed by DNAse digestion. Microarray experiments were carried out as two-color ratio hybridizations. RNA labeling was performed with a Fluorescent Linear Amplification Kit (Agilent Technologies). In brief, cDNA was reverse transcribed from 4 µg total RNA with an oligo-dT-T7 promoter primer and MMLV-RT. Second strand synthesis was carried out with random hexamers. Fluorescent antisense cRNA was synthesized with either cyanine 3-CTP (Cy3-CTP) or cyanine 5-CTP (Cy5-CTP) and T7 polymerase. The fluorescent-labeled antisense cRNA was precipitated over night with LiCl, ethanol washed and resuspended in water. The purified products were quantified at A552nm for Cy3-CTP and A650nm for Cy5-CTP and labeling efficiency was verified with a Nanodrop photometer (Kisker, Steinfurt, Germany). Before hybridization, 1.25 µg labeled cRNA of each product were fragmented and mixed with control targets and hybridization buffer according to the supplier's protocol (Agilent Technologies). Hybridizations were done over night for approximately 17 h at 60°C. The slides were washed according to the manufacturer's manual and scanning of microarrays was performed with 5 µm resolution using a DNA microarray laser scanner (Agilent Technologies). In order to compensate dye specific effects, and to ensure statistically relevant data, a color swap dye reversal was performed. Features were extracted with an image analysis tool Version A 6.1.1 (Agilent Technologies) using default settings. Data analysis was carried out on the Rosetta Inpharmatics platform Resolver Built 4.0. Expression patterns were identified by stringent data analysis using anti-correlation of the dye reversal ratio profiles and a 2fold expression cut-off of the ratio experiments. By combining the first and the second criteria of analysis we filtered out data points with low P-value (P-value < 0.01), making the analysis robust and reproducible. Additionally, by using this strategy we did the data selection independent of error models implemented in the Rosetta Resolver system. Keywords: other

ORGANISM(S): Mus musculus

PROVIDER: GSE2287 | GEO | 2005/03/01

SECONDARY ACCESSION(S): PRJNA91583

REPOSITORIES: GEO

ACCESS DATA

Dataset's files

Source:

			Action	DRS
		Other

Items per page:

1 - 1 of 1

Similar Datasets

Project description:ratio experiment by combining dye-reversal ratio profiles CD4+ alpha beta T cells were positively sorted from LatY136F or from wild-type spleen using a MACS and anti-CD4 beads. Gamma delta T cells were sorted from the spleen of Lat3YF and of Eb-/- mice using MACS and anti-CD5 beads. In vitro differentiated Th1 and Th2 cells were generated by culturing naive wild-type CD4+ T cells for 4 days in complete RPMI in the presence of anti-CD3 (1 µg/ml) plus anti-CD28 (1 µg/ml) with the addition of IL-12 (10ng/ml) and of anti-IL-4 (5µg/ml) for Th1-polarizing conditions, and of IL-4 (20ng/ml) plus anti-IFN-gamma (10µg/ml) for Th2-polarizing conditions. RNA was prepared using the Trizol method followed by DNAse digestion. Microarray experiments were carried out as two-color ratio hybridizations. RNA labeling was performed with a Fluorescent Linear Amplification Kit (Agilent Technologies). In brief, cDNA was reverse transcribed from 4 µg total RNA with an oligo-dT-T7 promoter primer and MMLV-RT. Second strand synthesis was carried out with random hexamers. Fluorescent antisense cRNA was synthesized with either cyanine 3-CTP (Cy3-CTP) or cyanine 5-CTP (Cy5-CTP) and T7 polymerase. The fluorescent-labeled antisense cRNA was precipitated over night with LiCl, ethanol washed and resuspended in water. The purified products were quantified at A552nm for Cy3-CTP and A650nm for Cy5-CTP and labeling efficiency was verified with a Nanodrop photometer (Kisker, Steinfurt, Germany). Before hybridization, 1.25 µg labeled cRNA of each product were fragmented and mixed with control targets and hybridization buffer according to the supplier's protocol (Agilent Technologies). Hybridizations were done over night for approximately 17 h at 60°C. The slides were washed according to the manufacturer's manual and scanning of microarrays was performed with 5 µm resolution using a DNA microarray laser scanner (Agilent Technologies). In order to compensate dye specific effects, and to ensure statistically relevant data, a color swap dye reversal was performed. Features were extracted with an image analysis tool Version A 6.1.1 (Agilent Technologies) using default settings. Data analysis was carried out on the Rosetta Inpharmatics platform Resolver Built 4.0. Expression patterns were identified by stringent data analysis using anti-correlation of the dye reversal ratio profiles and a 2fold expression cut-off of the ratio experiments. By combining the first and the second criteria of analysis we filtered out data points with low P-value (P-value < 0.01), making the analysis robust and reproducible. Additionally, by using this strategy we did the data selection independent of error models implemented in the Rosetta Resolver system. Keywords: other

Project description:Peumonia is the most common cause of death due to infectious diseases in the western hemisphere. The molecular events associated with pulmonary infections caused by Streptococcus pneumoniae and Influenza A virus are incompletely understood. Pathophysiological and protective processes are initiated by immune receptors specifically recognizing pathogenic structures serving to elicit a qualitatively and quantitatively adequate immune response. To provide a molecular framework towards a better understanding of the processes relevant in severe infectious pneumonia we performed a transcriptome analysis of lungs from mice infected with S. pneumoniae or Influenza A virus. Overall, we detected 1300 genes that exhibit significant differential expression after infection with either pathogen. Of those were approximately 36 % specific for pneumococcal and 30 % specific for the viral infection, yielding pathogen-specific as well as common inflammatory transcriptional signatures. Characteristically, these results resolve not only a differential response on the cytokine and chemokine level, although common induction of type I and type II interferons, TNFa, and IL-6 underlies both infections, but emphasize the potentially important role exerted by many genes implicated in the regulation and fine tuning of the inflammatory response. Furthermore, we noted a specific decrease in B cells after S. pneumoniae infection, which is not solely confined to the lung. Massive induction of apoptosis in pulmonary B cells could reflect a pneumococcal virulence strategy aiming against the lymphocyte population that is of utmost importance for the defence against capsulated bacteria. The pathophysiological consequences of Influenza A virus infection become obvious through differential induction of genes implicated in tissue regeneration and proliferation associated with detection of the emerging protective T cell response. These results may provide new insights into the pathogenesis and protective mechanisms important for the development of improved diagnostic and therapeutic strategies. Microarray analyses were performed as two-colour hybridizations. RNA was labelled with a Fluorescent Linear Amplification Kit (Agilent Technologies). Briefly, 4 Âµg total RNA was reverse transcribed with an oligo-dT-T7 promoter primer and MMLV-RT. Second strand synthesis was carried out with random hexamers. Fluorescent antisense cRNA was synthesized with either cyanine 3-CTP (Cy3-CTP) or cyanine 5-CTP (Cy5-CTP) and T7 polymerase. Purified products were quantified at A552nm for Cy3-CTP and A650nm for Cy5-CTP. Prior hybridization, 1.25 Âµg labelled cRNA each were fragmented, mixed with control targets and hybridization buffer according to the supplier's protocol (Agilent Technologies). Hybridizations were performed for 17 h at 60Â°C. The slides were washed according to the manufacturer's protocol and scanning of the arrays was performed with 5 Âµm resolution using a DNA microarray laser scanner (Agilent Technologies). To compensate for dye specific effects, and to ensure validity of the data, a colour swap analysis (fluorescence reversal) was performed. Features were extracted with the image analysis tool Version A6.1.1.1 from Agilent Technologies. Subsequent data analyses were carried out on the Rosetta Inpharmatics platform Resolver Built 3.2.2. Differential expression patterns were identified by applying 2-fold expression level cut-offs and an anti-correlation of the dye reversal experiments with an error weighted p-value < 0.05.

Project description:The microarrays experiments of three biological and one technical replicates were performed in YJR12 (wt) and YJR13 (myo1∆) strains. YJR12 (wild type) and YJR13 (myo1∆) strains were obtained as haploid segregants from a cross between YJR6 (myo1::HIS5 strain) and BY4741 (obtained from ATTC). Cultures were grown overnight at 26ºC to an optical density between 0.5-0.8 (OD600) in complete synthetic media (CSM, 2% glucose, 1X Nitrogen base) with continuous shaking at 200 rpm. RNA was extracted from ribosomal pellets using the RNeasy Mini Kit (Qiagen, Valencia, CA) following the manufacturer’s instructions. RNA concentrations were determined by measuring absorbance at 260nm using a Nanodrop spectrophotometer (Nanodrop Technologies). The purity and integrity of the RNA was monitored using an Agilent Bioanalyzer (Agilent Technologies) following the manufacturer’s instructions. 1.0 µg of RNA extracted form ribosomal pellets from each sample was amplified using the Low RNA Input Fluorescent Linear Amplification kit (Agilent Technologies). The amplified cRNA was labeled with 10mM Cyanine 5-CTP (Cy5) or Cyanine 3-CTP (Cy3) (Perkin Elmer Life Sciences). Labeled cRNA’s were purified with Qiagen RNeasy mini spin columns and dye incorporation was monitored on an Agilent Bioanalyzer. Hybridization of Cy5 and Cy3 labeled cRNA’s were performed using Yeast Oligo Microarray slides and hybridization kit from Agilent Technologies (Sheldon Manufacturing) at 60ºC for 17 hours. Slides were washed and scanned with a VersArray Chip Reader system (BioRad, Hercules, CA) at a resolution of 5mm with detector sensitivity values between 704-800 and laser power at 85%. Scanned images were transferred to the Imagene 3.0 software (Biodiscovery) for further analysis to locate spots, adjust the appropriate grid, and obtain the Cy3 and Cy5 TIFF files. The microarrays raw data generated with Imagene 3.0 were analyzed using Limma software (Bioconductor Package 1.7). The data was prepared for analysis by correcting for background intensity. The individual data sets were normalized using the locally weighted linear regression (Lowess) within each array. After normalization, the difference between the experimental and control signal was calculated, replicates were combined, and their averages were calculated. The fold change in gene expression was calculated by 2^(M), where M is the log2-fold change after background correction and normalization. An Empirical Bayes Statistics for differential expression analysis (eBayes statistics) was performed by Limma. Genes with a p-value ≤ 0.018 were established as a cutoff for differential expression. In addition, a false discovery rate (FDR) test was performed by Limma program.

Project description:Experiment on the effects of ethanol (acute oral) on induction of genes by polyinosinic polycytidylic acid (poly IC). Microarray methodology follows: cDNA for each sample was synthesized from 8.5 µg total RNA using a Superscript cDNA Synthesis Kit (Invitrogen, Carlsbad, CA) in combination with a T7-(dT)24 primer. Following phenol-chloroform extraction of the cDNA, biotinylated cRNA was transcribed in vitro using the BioArray HighYield RNA Transcript Labeling Kit (ENZO Biochem, New York, NY) and purified using the RNeasy Mini Kit (Qiagen, Valencia, CA). Twenty micrograms of purified cRNA was fragmented by incubation in fragmentation buffer (200 mM Tris-acetate, pH 8.1, 500 mM potassium acetate, 150 mM magnesium acetate) at 94°C for 35 minutes and chilled on ice. Fifteen micrograms of fragmented biotin-labeled cRNA was hybridized to the Murine Genome U74Av2 Array (Affymetrix, Santa Clara, CA), interrogating a total of 12,488 murine gene cDNA probes, for 16 hr at 45°C with constant rotation (60 rpm). The arrays were washed and then stained for 10 min at 25°C with 10 µg/mL streptavidin-R phycoerythrin (Vector Laboratories, Burlingame, CA) followed by 3 µg/mL biotinylated goat anti-streptavidin antibody (Vector Laboratories) for 10 minutes at 25°C. Arrays were then stained once again with streptavidin-R phycoerythrin for 10 min at 25°C. After washing and staining, the arrays were scanned using an Agilent GeneArray Scanner (Agilent Technologies) at 570 nm. Pixel intensities were measured, expression signals were analyzed and features extracted using a commercial software package (Microarray Suite ver 5.0, Affymetrix). Data mining and statistical analyses were performed with Data Mining Tool ver 3.0 (Affymetrix) algorithms. Arrays were globally scaled to a target intensity value of 2,500 in order to compare individual experiments. The absolute call (present, marginal, absent) of 12,488 gene expressions in each sample, as well as the direction of change, and fold change of gene expressions between samples were identified using the above-mentioned software. Keywords: other

Dataset Information

(ratio exp) LAT3YF CD5+ gamma delta T cells

Dataset's files

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets