Dye Bias Array Set
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE4982 | GEO | 2006/06/06
SECONDARY ACCESSION(S): PRJNA95487
REPOSITORIES: GEO
Similar Datasets
Project description:Spot intensity serves as a proxy for gene expression in dual-label microarray experiments. Dye bias is defined as an intensity difference between samples labeled with different dyes attributable to the dyes instead of the gene expression in the samples. Dye bias that is not removed by array normalization can introduce bias into comparisons between samples of interest. But if the bias is consistent across the samples for the same gene, it can be corrected by proper experimental design and analysis. If the dye bias is not consistent across samples for the same gene, but is different for different samples, then removing the bias becomes more problematic, perhaps indicating a technical limitation to the ability of fluorescent signals to accurately represent gene expression. Thus, it is important to characterize dye bias to determine: (1) whether it will be removed for all genes by array normalization, (2) whether it will not be removed by normalization but can be removed by proper experimental design and analysis and (3) whether dye bias correction is more problematic than either of these and is not easily removable. For two dual-label experiments, one with cDNA arrays and the other with printed oligonucleotide arrays, Stratagene universal human reference RNA was used as a standard for testing with RNA from cell lines MCF10a, LNCAP, L428, SUDHL, OCILY3 and Jurkat. All arrays were dye-swapped at least twice. There were a total of 28 cDNA arrays and 30 oligonucleotide arrays.
2006-06-06 | E-GEOD-4982 | biostudies-arrayexpress
Project description:Illumina Infinium whole genome genotyping (WGG) arrays are increasingly being applied in cancer genomics to study gene copy number alterations and allele-specific aberrations such as loss-of-heterozygosity (LOH). Methods developed for normalization of WGG arrays have mostly focused on diploid, normal samples. However, for cancer samples genomic aberrations may confound normalization and data interpretation. Therefore, we examined the effects of the conventionally used normalization method for Illumina Infinium arrays when applied to cancer samples. We demonstrate an asymmetry in the detection of the two alleles for each SNP, which deleteriously influences both allelic proportions and copy number estimates. The asymmetry is caused by a remaining bias between the two dyes used in the Infinium II assay after using the normalization method in Illumina’s proprietary software (BeadStudio). We propose a quantile normalization strategy for correction of this dye bias. We tested the normalization strategy using 535 individual hybridizations from 10 data sets from the analysis of cancer genomes and normal blood samples generated on Illumina Infinium II 300k version 1 and 2, 370k and 550k BeadChips. We show that the proposed normalization strategy successfully removes asymmetry in estimates of both allelic proportions and copy numbers. Additionally, the normalization strategy reduces the technical variation for copy number estimates while retaining the response to copy number alterations. The proposed normalization strategy represents a valuable low-level analysis tool that improves the quality of data obtained from Illumina Infinium arrays, in particular when used for LOH and copy number variation studies.
2008-10-04 | GSE11977 | GEO
Project description:The goal of this study is to gain a better understanding of the transcriptional responses of M. hyopneumoniae under norepinephrine stress. Six independent RNA samples from norepinephrine-exposed cultures were paired with six independent RNA samples from control cultures for hybridization to six two-color microarrays. For three arrays, the control RNA sample was labeled with Cy3 dye and the experimental RNA sample was labeled with Cy5 dye, the dyes were reversed for the other three arrays to overcome dye bias. Keywords: stress response
2008-03-01 | GSE8494 | GEO
Project description:The experiment was designed to enable validation of pre-processing and test algorithms. The in-house produced cDNA-array contains 44 clones: 19 clones from mice, 4 clones from Pine (involved in photosynthesis) and 21 artificial clones from the Lucidea Universal ScoreCard (Amersham Bioscienses), where each clone was printed 480 times in 48 identically designed sub-grids. The experiment contains eight arrays with identical experimental design. Total RNA from murine cell line was divided in two samples; the reference sample was labeled with the fluorophore Cy5 and spiked with the Lucidea Universal ScoreCard reference reaction, the test sample was labeled with Cy3 and spiked with the Lucidea Universal ScoreCard test reaction. The concentrations of the Lucidea reactions are known and consequently so are the true ratios between the reference and test channels. Approximately 40% of the artificial genes were differentially expressed. The particular design of the experiment makes the data suitable for validating algorithms for pre-processing and tests for identifying differentially expressed genes. - The 80.I.1 normalization algorithm : all spots flagged as not found during image analysis considered missing values (complete filtration). Print-tip MA-loess dye normalization based on the calibration clones was applied to the raw data and the B-statistic was calculated. - The 80.II.1 normalization algorithm : all spots flagged as not found during image analysis considered missing values (complete filtration). Local background correction was applied and all spots with negative values were excluded. Print-tip MA-loess dye normalization based on the calibration clones was applied to the background corrected data and the B-statistic was calculated. - The 80.II.64 normalization algorithm : all spots flagged as not found during image analysis considered missing values (complete filtration). Local background correction was applied, negative values were excluded and all spots with a value below 64 were set to 64 (censored). Print-tip MA-loess dye normalization based on the calibration clones was applied to the background corrected data and the B-statistic was calculated. - The 80.V.1 normalization algorithm : The intensities of all spots flagged not found were treated as missing values during normalization, but prior to calculating test-statistics the spot's log-ratios were set to zero. In the special case when all arrays generated not-found spots, the gene was removed from the experiment (Partial filtration). Local background correction was applied and all negative values were considered missing values. Print-tip MA-loess dye normalization based on the calibration clones was applied to the background corrected data and the B-statistic was calculated.
2011-05-21 | GSE29400 | GEO
Project description:To identify Six1 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six1wt or VP16-Six1W171R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six1wt infected sample) or Cy5 (AxCAwt VP16-Six1W171R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. To identify Six4 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six4wt or VP16-Six4W263R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six4wt infected sample) or Cy5 (AxCAwt VP16-Six4W263R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. Keywords: other
2005-07-20 | GSE2043 | GEO
Project description:The goal of this study is to gain a better understanding of the transcriptional responses of M. hyopneumoniae under norepinephrine stress. Six independent RNA samples from norepinephrine-exposed cultures were paired with six independent RNA samples from control cultures for hybridization to six two-color microarrays. For three arrays, the control RNA sample was labeled with Cy3 dye and the experimental RNA sample was labeled with Cy5 dye, the dyes were reversed for the other three arrays to overcome dye bias. Keywords: stress response Six independent RNA samples from norepinephrine-exposed cultures were paired with six independent RNA samples from control cultures for hybridization to six two-color microarrays. For three arrays, the control RNA sample was labeled with Cy3 dye and the experimental RNA sample was labeled with Cy5 dye, the dyes were reversed for the other three arrays to overcome dye bias.
2010-05-26 | E-GEOD-8494 | biostudies-arrayexpress
Project description:Our earlier report states isolation of ovarian cancer stem cell heirarchy using membrane labeling PKH26/67 dyes (Kusumbe and Bapat Cancer Research. 2009) in a xenograft model. We earlier reported that ovarian cancer is a stem cell disease with isolation of cell line (A4T) from a patient with Grade IV serous adenocarcinoma (Bapat et al. Cancer Research. 2005). A4T cells were labelled with PKH26 membrane labeling dye, flourescence intensity was quantified and set as 100% dye retaining cells (PKHhi) with flow cytometery. 2.5x10^6 P65 A4PKH26 labeled cells were injected s.c in NOD/SCID mice, while unlabeled cells were also injected for generation of control tumors . Mice were observed for tumor formation and tumors were harvested at day 28 (4 weeks) and processed for collagenase digestion for preparation of single cell suspension. Tumor cells were acquired on BD FACS Aria II across PE channel of blue laser. Cells retaining dye intensity as that of preinjected cells were gated as PKHhi while cells exhibiting complete dye depletion were gated as PKHneg using unlabeled tumor cells as control; while cells showing intermediate label intensity were gated as PKHlo. Details of the flow cytometry analysis and sorting are published in our earlier reports (Kusumbe and Bapat Cancer Research. 2009).
2016-01-01 | GSE74851 | GEO
Project description:Array Design; Mouse Compugen 22K Spotted Oligo Author; Sean Grimmond Common Reference (Yes/No, ID); Yes Mouse universal Reference (Stratagene) Concentration; 100 Data processing/normalization; Lowess Normalisation GeneSpring) Developmental Stage; embryonic Diseased/Normal; normal Dye Swap; red/green Experiment Type; time course Genetic Characteristic; Wild type Image Analysis Software; Imagene5.5 (Biodiscovery) Labeling Protocol; Amino Allyl Message Amp- Ambion Organ/Organism part; kidney Organism; Mus Musculus RNA type; aRNA Message Amp-ambion Tissue Type; Pool of whole organs Organization; IMB, Uni of QLD, Brisbane Australia Sample Source; primary tissue Sampling Method; Dissection of whole organ Sex; Pool of both sexes Strain/Cell-line; CD1 Series_overall_design: To account for dye swap, the signal channel and control channel measurements for each sample were reversed. A Lowess curve was fit to the log-intensity versus log-ratio plot. 20.0% of the data was used to calculate the Lowess fit at each point. This curve was used to adjust the control value for each measurement. If the control channel was lower than 10 then 10 was used instead. Specific samples were normalized to one another: sample(s) 1-38 were normalized against the median of the control sample(s) 1-38. Each measurement for each gene in those specific samples was divided by the median of that gene's measurements in the corresponding control samples. Keywords: time-course
2005-07-20 | GSE2282 | GEO
Project description:The wild type strain of Halobacterium salinarium strain NRC-1 was used for the diel growth experiments. For experiment, cultures were started at an OD >> 0.001. Cultures were grown anaerobically at a temperature of 38° C under light:dark cycles (12:12 hrs) for 120 hours then grown under constant light. Average light intensity was 150 μE/m2/sec. Time course sampling began 84 hours into the light:dark phase. Samples were collected every 3 hours for 72 hours. At each time point, culture was withdrawn by syringe and replaced with nitrogen gas. Aliquots of the culture were centrifuged and the cell pellet flash-frozen in a dry ice/ethanol bath after decanting the supernatant. RNA extractions were performed using the Stratagene Absolutely RNA Miniprep Kit and RNA quality checked with the Agilent Bioanalyzer and with Oligo Microarrays were fabricated at the Institute for Systems Biology Microarray Facility. The arrays contain 4 spots per unique 70-mer oligonucleotides for each of 2400 non-redundant genes in Halobacterium NRC-1 Labeling, hybridization and washing have been previously described (Baliga et al. 2002) with 10 μg of RNA from the sample and reference. RNA from the final time point of a replicate experiment was used as the reference. For this experiment 3 μl of ULYSIS Alexa Fluor 594 and 6 μl of 660 dyes (Molecular Probes) were used for labeling. Bias in dye incorporation was accounted for by reversing the labeling dyes (dye-flip). Raw data was processed and converted into log10 ratios with lambda (λ) values determined by a maximum likelihood method. Baliga, N. S., Pan, M., Goo, Y. A., Yi, E. C., Goodlett, D. R., Dimitrov, K., Shannon, P., Aebersold, R., Ng, W. V. & Hood, L. (2002) Proc Natl Acad Sci U S A 99:14913-84. Keywords: environmental response
2008-01-03 | GSE7712 | GEO