Experiment 1: Thermophilic condition enables consistent co-fermentation of waste activated sludge and food waste.
Ontology highlight
ABSTRACT:
PROVIDER: PRJEB77935 | ENA |
REPOSITORIES: ENA
Similar Datasets
Project description:Experiment 2: Thermophilic condition enables consistent co-fermentation of waste activated sludge and food waste
| PRJEB73832 | ENA
Project description:Inferring Microbial Interactions in Thermophilic and Mesophilic Anaerobic Digestion of Hog Waste
| PRJEB16728 | ENA
Project description:Inferring Microbial Interactions in Thermophilic and Mesophilic Anaerobic Digestion of Hog Waste
| PRJEB16727 | ENA
Project description:Transcriptomics analysis of biopolymer (medium chain length polyhydroxyalkanoate) producing strain P.putida LS46 cultured with biodiesel derived waste carbon sources: studies of cellular adaptation to the industrial waste streams and metabolic profiling under the polymer producing conditions. We are reporting RNAseq analysis data here as part of our multi-level Omics study of medium chain length polyhydroxyalkanoate (mcl-PHA) producing strain P.putida LS46 culture with biodiesel derived waste glycerol and waste fatty acids. The data presented here will be used in two separate manuscripts. The objectives of this study are a): to evaluate cellular responses of P.putida LS46 under industrial waste stream. b): to study gene expression profile under two selected mcl-PHA producing conditions of P.putida LS46. Comparative multi-level Omics study: for objective a): Exponential P.putida LS46 cell from waste glycerol culture compared against reagent grade pure glycerol culture. For objective b): Two mcl-PHA producing conditions, namely stationary phase waste glycerol culture and exponential phase waste fatty acid culture of P.putida LS46, were compared against exponential phase waste glycerol culture of P.putida LS46. Major results from objective a): The waste glycerol substrate induced expression of a large number of genes putatively involved in heavy metal tolerance, including three gene clusters: a putative cusABC transcript unit and two copies of copAB, which are usually involved in copper resistance and tolerance to other monovalent heavy metals. A local gene relocation was observed in cluster 1 consisting cusABC and copAB relative to the KT2440 type strain according to the phylogenetic and gene neighbourhood analyses on various P. putida strains. P. putida LS46 also contains 11 putative MerR family regulators, which sense various environmental stimuli including heavy metals. MerR-1 is an ortholog of the copper response regulator of other gram-negative bacteria, and was highly up-regulated in waste glycerol cultures. Finally, a number of genes involved in cell responses to high extra-cellular Na+ concentrations, and genes of the fatty acid beta-oxidation pathway were up-regulated in waste glycerol cultures Major results from objective b): Regardless to the type of substrates, up-regulation of two mcl-PHA synthase (PhaC1 and PhaC2), and two phasin proteins (PhaF and PhaI) are the most common genotype under mcl-PHA production conditions. PhaG and possible PhaJ4 connect fatty acid de novo synthesis to mcl-PHA in waste glycerol culture. Interestingly, expression of gene, fabZ, in production of unsaturated fatty acid from fatty acid de novo synthesis was only observed in waste glycerol culture. On the other hand, PhaJ1 and PhaJ4 derived mcl-PHA production via fatty acid beta-oxidation was observed under waste fatty acid culture. These results would help to explain observed different production kinetics and monomer distribution of the polymer. Although under active mcl-PHA production condition, depression on the expression of glpF genes in glycerol transportation system prevent further channelling extra-cellular glycerol into the cell. Waste glycerol culture also triggers trahalose synthesis pathway, a potential competing pathway during mcl-PHA synthesizing. In waste fatty acid culture, the intermediates (acyl-CoA and 3-hydroxyacyl-CoA) of fatty acid beta-oxidation were used for mcl-PHA production and were also likely hydrolysed to their free acid forms via an up-regulated thioesteras coding gene, tesA. Acetyl-CoA cleaved from the pathway was clearly channeled into glyoxylate shut for C2 carbon assimilation over spillage as CO2 through TCA cycle or used in fatty acid biosynthesis pathway. In total 4 sampling points, namely exponential phase of pure glycerol, waste glycerol and waste free fatty acids cultures, and stationary phase of waste glycerol culture. For each sampling point, 2 biological replicates were taken. (Thus 8 samples in total)
2015-05-01 | E-GEOD-65029 | biostudies-arrayexpress
Project description:Thermophilic waste air treatment of n-alkane mixtures in a two-phase bubble column reactor
| PRJEB36001 | ENA
Project description:Transcriptomics analysis of biopolymer (medium chain length polyhydroxyalkanoate) producing strain P.putida LS46 cultured with biodiesel derived waste carbon sources: studies of cellular adaptation to the industrial waste streams and metabolic profiling under the polymer producing conditions. We are reporting RNAseq analysis data here as part of our multi-level Omics study of medium chain length polyhydroxyalkanoate (mcl-PHA) producing strain P.putida LS46 culture with biodiesel derived waste glycerol and waste fatty acids. The data presented here will be used in two separate manuscripts. The objectives of this study are a): to evaluate cellular responses of P.putida LS46 under industrial waste stream. b): to study gene expression profile under two selected mcl-PHA producing conditions of P.putida LS46. Comparative multi-level Omics study: for objective a): Exponential P.putida LS46 cell from waste glycerol culture compared against reagent grade pure glycerol culture. For objective b): Two mcl-PHA producing conditions, namely stationary phase waste glycerol culture and exponential phase waste fatty acid culture of P.putida LS46, were compared against exponential phase waste glycerol culture of P.putida LS46. Major results from objective a): The waste glycerol substrate induced expression of a large number of genes putatively involved in heavy metal tolerance, including three gene clusters: a putative cusABC transcript unit and two copies of copAB, which are usually involved in copper resistance and tolerance to other monovalent heavy metals. A local gene relocation was observed in cluster 1 consisting cusABC and copAB relative to the KT2440 type strain according to the phylogenetic and gene neighbourhood analyses on various P. putida strains. P. putida LS46 also contains 11 putative MerR family regulators, which sense various environmental stimuli including heavy metals. MerR-1 is an ortholog of the copper response regulator of other gram-negative bacteria, and was highly up-regulated in waste glycerol cultures. Finally, a number of genes involved in cell responses to high extra-cellular Na+ concentrations, and genes of the fatty acid beta-oxidation pathway were up-regulated in waste glycerol cultures Major results from objective b): Regardless to the type of substrates, up-regulation of two mcl-PHA synthase (PhaC1 and PhaC2), and two phasin proteins (PhaF and PhaI) are the most common genotype under mcl-PHA production conditions. PhaG and possible PhaJ4 connect fatty acid de novo synthesis to mcl-PHA in waste glycerol culture. Interestingly, expression of gene, fabZ, in production of unsaturated fatty acid from fatty acid de novo synthesis was only observed in waste glycerol culture. On the other hand, PhaJ1 and PhaJ4 derived mcl-PHA production via fatty acid beta-oxidation was observed under waste fatty acid culture. These results would help to explain observed different production kinetics and monomer distribution of the polymer. Although under active mcl-PHA production condition, depression on the expression of glpF genes in glycerol transportation system prevent further channelling extra-cellular glycerol into the cell. Waste glycerol culture also triggers trahalose synthesis pathway, a potential competing pathway during mcl-PHA synthesizing. In waste fatty acid culture, the intermediates (acyl-CoA and 3-hydroxyacyl-CoA) of fatty acid beta-oxidation were used for mcl-PHA production and were also likely hydrolysed to their free acid forms via an up-regulated thioesteras coding gene, tesA. Acetyl-CoA cleaved from the pathway was clearly channeled into glyoxylate shut for C2 carbon assimilation over spillage as CO2 through TCA cycle or used in fatty acid biosynthesis pathway.
2015-05-01 | GSE65029 | GEO
Project description:Myceliophthora thermophila is a thermophilic fungus with great biotechnological characteristics for industrial applications, which can degrade and utilize all major polysaccharides in plant biomass. Nowadays, it has been developing into a platform for production of enzyme, commodity chemicals and biofuels. Therefore, an accurate genome-scale metabolic model would be an accelerator for this fungus becoming a universal chassis for biomanufacturing. Here we present a genome-scale metabolic model for M. thermophila constructed using an auto-generating pipeline with consequent thorough manual curation. Temperature plays a basic and critical role for the microbe growth. we are particularly interested in the genome wide response at metabolic layer of M. thermophilia as it is a thermophlic fungus. To study the effects of temperature on metabolic characteristics of M. thermophila growth, the fungus was cultivated under different temperature. The metabolic rearrangement predicted using context-specific GEMs integrating transcriptome data.The developed model provides new insights into thermophilic fungi metabolism and highlights model-driven strain design to improve biotechnological applications of this thermophilic lignocellulosic fungus.
2022-09-14 | GSE184074 | GEO
Project description:The zygomycete fungi-like Rhizomucor miehei have been extensively exploited for the production of various enzymes. As a thermophilic fungus, R. miehei is capable of growing at temperatures that approach the upper limits for all eukaryotes. In order to study the thermophilic mechanism, the transcriptional profiles of R. miehei CAU432 grown at two different temperatures (at 30°C and 50°C) were investigated by RNA-seq analysis. Approximately 35 million high-quality reads were generated from each library, and 62% reads were uniquely mapped to the genome. A high percentage of reads (67.1%) were mapped to predicted protein-coding genes, while 3.96% reads were distributed in splice junctions, 3.49% reads in antisense transcripts, 2.27% in introns, and 21.9% in other genomic regions. The frequency of reads which mapped to different genes ranged from one to over 300,000. More than 90% of predicted genes (9,680, 93% at 30°C; 9,618, 93.6% at 50°C) were detected with at least one read, while 128 genes and 190 genes were uniquely expressed at 50°C and 30°C, respectively. The results show that 2,117 genes were differently expressed (P<0.001) by the fungus with more than two-fold changes. These genes include 849 up-regulated and 1,268 down-regulated genes in mycelia grown at 50°C. These significantly differently expressed genes include many genes, putatively involved in thermophilic process, such as HSP, chaperones and proteasome.
2013-08-31 | GSE31580 | GEO
Project description:The ideal microorganism for consolidated biomass processing to biofuels has the ability to breakdown of lignocellulose. This issue was examined for the H2-producing, extremely thermophilic bacterium Caldicellulosiruptor saccharolyticus growing on lignocellulose samples as well as model hemicellulose components. Identification of the enzymes utilized by the cell in lignocellulose saccharification was done using whole-genome transcriptional response analysis and comparative genomics.
2010-02-15 | GSE18856 | GEO