Unknown,Transcriptomics,Genomics,Proteomics

Dataset Information

Characterization of Mycobacterium smegmatis SigF regulon

ABSTRACT: Mycobacterium smegmatis SigF is a group III sigma factor. Its ortholog in M. tuberculosis is reported to have role in regulation and function of cell wall components. In present study we have created an M. smegmatis M-NM-^TsigF mutant by allele exchange method. M. smegmatis sigF mutant shows non pigmented phenotype and is more sensitive to hydrogen peroxide generated oxidative stress. DNA microarray analysis of M. smegmatis wild type and M-NM-^TsigF mutant suggests that SigF in this species controls the expression of several energy and central intermediary metabolism genes along with regulation of carotenoid biosynthesis. Gene expression patterns of M.smegmatis wild type and M-NM-^TsigF mutant strains were compared at two growth stages i.e. log (OD600 ~1.4) and stationary (OD600 ~3.0). M. smegmatis strains were grown in DifcoTM MiddleBrook 7H9 broth base (BD Biosciences, Sparks, MD, USA) with 0.2% glycerol (v/v) and 0.05% Tween-80 (Sigma-Aldrich, St Louis, MO, USA) supplemented with 10% albumen dextrose catalase (BD Biosciences) (v/v) at 37 0C with continuous shaking. Total RNA was isolated using Trizole (Invitrogen) method and labelled with cyanine 3 (Cy3) as per Agilent 1-color labelling protocol (Version 5.5, February 2007). Six hundred nanograms of each Cy3 labelled samples were fragmented and hybridized. Fragmentation of labeled cRNA and hybridization were performed using Gene Expression Hybridization kit (Agilent Technologies). Hybridization was carried out in AgilentM-bM-^@M-^Ys Surehyb Chambers at 65 0C for 16 h. The hybridized slides were washed using Agilent Gene Expression wash buffers and scanned using the Agilent Microarray Scanner G Model G2565BA at 5 micron resolution. Feature extracted data was analysed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation. Set measurements less than 0.01 to 0.01 per chip, normalize to 50th percentile per gene, and normalize to specific samples.

ORGANISM(S): Mycobacterium smegmatis str. MC2 155

SUBMITTER: Bhupendra Singh

PROVIDER: E-GEOD-19774 | biostudies-arrayexpress |

REPOSITORIES: biostudies-arrayexpress

ACCESS DATA

Similar Datasets

Project description:Gene expression analysis study in curcumin treated (20ÂµM curcumin treated Y79 cells ) and control Y79 cells (Suspension Y79 cells). Source were Y79 retinoblastoma cell line from human. Organism used: Homo sapiens ï Slides: Gene Expression Whole Human Genome 4x44k ï Starting material: Cells in RNA later ï RNA Samples used: :Control Y79 and Treated_Curcumin ï Labeling kit: Agilents Low input RNA linear amplification Kit one color Labeling Method: T7 promoter based-linear amplification to generate labeled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit ï Hybridization Kit: Agilentâs In situ Hybridzation kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Retinoblastoma Y79 cell line was treated with specific siRNA to silence EpCAM gene expression in vitro and RNA was isolated for microarray experiment to study the changes in the whole gene expression profiling in the Y79 cell line. The study identified 465 up-regulated genes (>1.0 fold) and 205 down-regulated genes (<0.5 fold) in response to knockdown of Ep-CAM. Organism used: Homo Sapiens ï Slides: Whole genome Human 4x44k array ï Starting material: Cells in RNA Later ï RNA Samples used: Control, siRNA1 ï Labeling kit: Agilent Low Input RNA Linear amplification kit ï Labeling Method: T7 promoter based-linear amplification to generate labelled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit ï Hybridization Kit: Agilent Insitu Hybridization Kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Gene expression analysis study in cerulenin treated - 7Âµg/ml cerulenin treated Y79 cells and control Y79 cells Organism used: Homo sapiens ï Slides: Gene Expression Whole Human Genome 4x44k ï Starting material: Cells in RNA later ï RNA Samples used: :Control Y79 and Treated_Cerulenin ï Labeling kit: Agilents Low input RNA linear amplification Kit one color ï Labeling Method: T7 promoter based-linear amplification to generate labeled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit ï Hybridization Kit: Agilentâs In situ Hybridzation kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Retinoblastoma Y79 cell line was treated with scopoletin in vitro and RNA was isolated for microarray experiment to study the changes in the whole gene expression profiling in the Y79 cell line. The study identified 1675 up-regulated genes (>1.0 fold) and 1879 down-regulated genes (<-1 fold) in response to scopoletin treatment Slides:Whole genome Human 4x44k array ï Starting material: Cells in RNA Later ï RNA Samples used: Y79_c_Noni Extract,Control ï Labeling kit: Agilentâs Quick-Amp labeling Kit ï Labeling Method: T7 promoter based-linear amplification to generate labeled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit Cat ï Hybridization Kit: Agilentâs In situ Hybridzation kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Phagocytosis requires the activation of a plethora of mechanisms that include the activation of the actin cytoskeleton guided by the Arp2/3 complex. These are promoted by activators such as the Wiskott Aldrich Syndrome Protein (WASP) family members. In order to further understand the molecular mechanisms involved in the early events leading the phagocytosis of the pathogenic Mycobacterium tuberculosis, we set out to examine potential roles of miRNAs in phagocytosis using genome-wide expression profiling to identify miRNAs differentially regulated following mycobacterial infection. One of the miRNAs activated upon infection of mouse macrophages with the non-pathogenic Mycobacterium smegmatis, the widely conserved miR-142-3p, was predicted and confirmed to target the Neural-WASP (N-WASP). Upregulating of miR-142-3p in mouse macrophages inversely correlated with levels of N-WASP, upon infection with live pathogenic and non-pathogenic mycobacteria, suggesting an active role of Mycobacterium tuberculosis on the regulation of phagocytosis, at the post-transcriptional level, in host cells. The reduction of N-WASP correlated with a reduced internalization of bacteria per macrophage, independently of the phagocytosis index. Furthermore, the downregulation of WASP levels accompanied those of N-WASP, at early but not at late time points, suggesting a closely regulatory mechanism among both family members, dependent on the time frame of the phagocytosis. Additionally, upregulating of miR-142-3p promoted the change in the protein levels of another predicted and confirmed target, the Cofilin2 protein, in a phagocytosis-independent fashion. Downregulation experiments promoted aberrant morphologic phenotypes in macrophages, similar to observed by others in PBMCs of humans with Wiskott Aldrich Syndrome, suggesting the strong involvement of miR-142-3p on the regulation of the actin machinery in macrophages. Altogether these results show for the first time that miRNAs are involved in the regulation of actin-mediated phagocytosis of pathogenic bacteria and that these are direct targets of Mycobacterium tuberculosis. Expression analysis of mouse macrophage cell line J774A.1 in response to infection with Mycobacterium smegmatis mc2155 EGFP. Three biological replicates each for uninfected and infected samples.

Dataset Information

Characterization of Mycobacterium smegmatis SigF regulon

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets