Dataset Information

Amphiphilic Polyoxazoline Copolymer-Imidazole Complexes as Tailorable Thermal Latent Curing Agents for One-Component Epoxy Resins.

ABSTRACT: One-component epoxy resins (OCERs) are proposed to overcome the energy inefficiency and processing difficulties of conventional two-component epoxy resins by employing latent curing agents, specifically thermal latent curing agents (TLCs). Despite recent progress, the need for TLCs with a simple preparation method for different curing agents, epoxy resins, and process conditions remains. Here, tailorable TLCs were prepared by forming complexes between imidazole (Im) and amphiphilic polyoxazoline copolymers with tunable structures and properties by a solvent evaporation method. The obtained TLCs were manually mixed with DGEBA to prepare OCERs. The miscibility of the complexes with DGEBA was studied, considering the functionalities of copolymers. The curing behaviors of TLCs were compared using dynamic Differential Scanning Calorimetry (DSC) studies considering the side chain and composition of the copolymers, copolymer:Im ratio, and concentration of Im in DGEBA. The curing behavior of the promising OCERs was studied by isothermal DSC studies to investigate their stability at different temperatures and curing rate at elevated temperatures revealing the stability of these OCERs.

SUBMITTER: Behroozi Kohlan T

PROVIDER: S-EPMC10720278 | biostudies-literature | 2023 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Amphiphilic Polyoxazoline Copolymer-Imidazole Complexes as Tailorable Thermal Latent Curing Agents for One-Component Epoxy Resins.

Behroozi Kohlan Taha T Atespare Asu Ece AE Yildiz Mehmet M Menceloglu Yusuf Ziya YZ Unal Serkan S Dizman Bekir B

ACS omega 20231130 49

One-component epoxy resins (OCERs) are proposed to overcome the energy inefficiency and processing difficulties of conventional two-component epoxy resins by employing latent curing agents, specifically thermal latent curing agents (TLCs). Despite recent progress, the need for TLCs with a simple preparation method for different curing agents, epoxy resins, and process conditions remains. Here, tailorable TLCs were prepared by forming complexes between imidazole (Im) and amphiphilic polyoxazoline ...[more]

PMID: 38107921

Similar Datasets

Project description:One-component epoxy resins (OCERs) with improved stability (shelf life) and controlled curing temperatures were prepared using epoxy resins and polyoxazoline-imidazole (POZ-Im) based thermal latent curing agents (TLCs). POZ homopolymers with molar masses of 1000, 2000, and 5000 g/mol were obtained via cationic ring-opening polymerization (CROP) of 2-ethyl-2-oxazoline, 2-propyl-2-oxazoline, 2-pentyl-2-oxazoline, and 2-phenyl-2-oxazoline. TLCs were prepared by physically entrapping imidazole, the curing agent, in the POZ matrix at the homopolymer/Im (HP/Im) ratios of 1:1 and 5:1 and characterized by FTIR and TGA. TLCs were then mixed with bisphenol A diglycidyl ether (DGEBA) to obtain OCERs with Im concentrations of 1, 3, and 5 wt %. Dynamic DSC tests were performed to determine the effect of the pendant group and molar mass of POZ, the POZ/Im ratio, and Im concentration on the curing behavior of the OCERs, whereas isothermal DSC tests were carried out to examine their thermal stability and optimal curing temperatures. Optical microscopy was performed to study the compatibility of the TLCs with DGEBA. This study showed that the dispersion quality of TLCs is highly associated with the compatibility of POZs and DGEBA, which affected the release of Im, thus left limit temperatures of curing. In addition, higher left limit temperatures were obtained when the POZ/Im ratio increased. Isothermal DSC results conformed to the improved stability and better thermal latency of the samples with a POZ/Im ratio of 5:1. Moreover, the higher left limit temperatures were obtained with the lowest molar mass of POZ due to the better interaction between the -OH end group of POZ and Im. The shelf life of PEOZ 1K-Im 5:1 1% OCER was predicted at -20, 0, and 20 °C, with an estimated 15.3 days at 20 °C using isothermal DSC and rheology at 50, 60, and 70 °C. Overall, this research contributes to the development of OCERs by introducing POZ-Im complexes as novel TLCs. The findings shed light on the importance of compatibility in achieving optimal dispersion and release of Im and the role of the POZ/Im ratio and POZ molar mass in controlling left limit temperatures, ultimately influencing the curing behavior of OCERs.

Project description:We investigated the influence of anion type (salicylate, [(MOB)MIm][Sal], vs chloride, [(MOB)MIm][Cl]) of imidazolium-based ionic liquid (IL) and its content on the curing kinetics of bisphenol A diglicydyl ether (DGEBA of molecular weight M n = 340 g/mol). Further physicochemical properties (i.e., glass transition temperature, T g, and conductivity, σdc) of produced polymers were investigated. The polymerization of the studied systems was examined at various molar ratios (1:1, 10:1, and 20:1) at different reaction temperatures (T reaction = 353-383 K) by using differential scanning calorimetry (DSC). Interestingly, both DGEBA/IL compositions studied herein revealed significantly different reaction kinetics and yielded materials of completely distinct physical properties. Surprisingly, in contrast to [(MOB)MIm][Cl], for the low concentration of [(MOB)MIm][Sal] in the reaction mixture, an additional step in the kinetic curves, likely due to the combined enhanced initiation activity of anion (salicylate)-cation (imidazolium-based), was noted. To thoroughly analyze the kinetics of all studied systems, including the two-step kinetics of DGEBA/[(MOB)MIm][Sal], we applied a new approach that relies on the combination of the two phenomenological Avrami equations. Analysis of the determined constant rates revealed that the reaction occurring in the presence of the salicylate anion is characterized by higher activation energy with respect to those with the chloride. Moreover, DGEBA/[(MOB)MIm][Sal] cured materials have higher T g in comparison to DGEBA polymerized with [(MOB)MIm][Cl] independent of the IL concentration. This fact might indicate that, most likely, the products of hardening are highly cross-linked (high T g) or oligomeric linear polymers (low T g) in the former and latter cases, respectively. Such a change in the chemical structure of the polymer is also reflected in the dc conductivity measured at the glass transition temperature, which is much higher for DGEBA cured with [(MOB)MIm][Cl]. Herein, we have clearly demonstrated that the type of anion has a crucial impact on the polymerization mechanism, kinetics, and properties of produced materials.

Dataset Information

Amphiphilic Polyoxazoline Copolymer-Imidazole Complexes as Tailorable Thermal Latent Curing Agents for One-Component Epoxy Resins.

Publications

Amphiphilic Polyoxazoline Copolymer-Imidazole Complexes as Tailorable Thermal Latent Curing Agents for One-Component Epoxy Resins.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets