Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polybenzoxazines: Thermal Responsiveness of Hydrogen Bonds and Application as Latent Curing Agents for Thermosetting Resins.

ABSTRACT: This work aims at exploring the application of polybenzoxazines as thermal latent curing agents for epoxy resins. Thorough studies have shown that hydrogen bonds of polybenzoxazines block the reactivity of phenolic hydroxyl at ambient temperatures and break at elevated temperatures to release the free phenolic hydroxyl. On the basis of these findings, polybenzoxazines are used as thermal latent curing agents. Mixtures of polybenzoxazines and epoxy resins exhibit a long shelf life at room temperature, and the corresponding copolymers possess enhanced properties. This novel insight into using polybenzoxazines as thermal latent curing agents for epoxy resins is anticipated to help researchers explore novel latent curing agents and apply polybenzoxazines more widely.

SUBMITTER: Zhang S

PROVIDER: S-EPMC6641022 | biostudies-literature | 2017 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Polybenzoxazines: Thermal Responsiveness of Hydrogen Bonds and Application as Latent Curing Agents for Thermosetting Resins.

Zhang Shuai S Yang Po P Bai Yun Y Zhou Tao T Zhu Rongqi R Gu Yi Y

ACS omega 20170419 4

This work aims at exploring the application of polybenzoxazines as thermal latent curing agents for epoxy resins. Thorough studies have shown that hydrogen bonds of polybenzoxazines block the reactivity of phenolic hydroxyl at ambient temperatures and break at elevated temperatures to release the free phenolic hydroxyl. On the basis of these findings, polybenzoxazines are used as thermal latent curing agents. Mixtures of polybenzoxazines and epoxy resins exhibit a long shelf life at room tempera ...[more]

PMID: 31457521

Similar Datasets

Monitoring the Cure State of Thermosetting Resins by Ultrasound.

Project description:The propagation of low intensity ultrasound in a curing resin, acting as a high frequency oscillatory excitation, has been recently proposed as an ultrasonic dynamic mechanical analysis (UDMA) for cure monitoring. The technique measures sound velocity and attenuation, which are very sensitive to changes in the viscoelastic characteristics of the curing resin, since the velocity is related to the resin storage modulus and density, while the attenuation is related to the energy dissipation and scattering in the curing resin. The paper reviews the results obtained by the authors' research group in the last decade by means of in-house made ultrasonic set-ups for both contact and air-coupled ultrasonic experiments. The basics of the ultrasonic wave propagation in polymers and examples of measurements of the time-evolution of ultrasonic longitudinal modulus and chemical conversion of different thermosetting resins are presented. The effect of temperature on the cure kinetics, the comparison with rheological, low frequency dynamic mechanical and calorimetric results, and the correlation between ultrasonic modulus and crosslinking density will be also discussed. The paper highlights the reliability of ultrasonic wave propagation for monitoring the physical changes taking place during curing and the potential for online monitoring during polymer and polymer matrix composite processing.

| S-EPMC5452663 | biostudies-other

Zeolitic Imidazolate Frameworks as Latent Thermal Initiators in the Curing of Epoxy Resin.

Project description:The curing of a mixture of glycidyl phenyl ether (GPE) and hexahydro-4-methylphthalic anhydride (MHHPA) with zeolitic imidazolate frameworks (ZIFs)-ZIF-7, ZIF-8, ZIF-11, and ZIF-14-as latent thermal initiators has been critically evaluated. For ZIF-8 and ZIF-14, the % conversion values for GPE were 92 and 93%, respectively, for curing at 100 °C and for 1 h. With regard to the stability of ZIF-8 and ZIF-14 in the GPE-MHHPA mixture, the % conversion values for GPE were 11 and 12% for storage over 8 days at 25 °C. The ZIF-8 and ZIF-14 initiators exhibited excellent thermal latency for heating at 100 °C and showed good stability for storage at 25 °C. To evaluate the practicality of the resin curing system, the reactions of 2,2-bis(4-glycidyloxyphenyl)propane (DGEBA) and MHHPA with ZIFs were studied by differential scanning calorimetry. Prominent exothermic peaks for ZIF-8 and ZIF-14 were observed at 157 and 162 °C, respectively; by comparison, for the commercially available microencapsulated latent thermal initiators HX-3088 and HX-3722, the respective peak maxima were 177 and 181 °C, respectively. The exothermic peak maxima for ZIF-8 and ZIF-14 were lower than those for HX-3088 and HX-3722. The ZIF-8 and ZIF-14 initiators can be stored in precured epoxy resin at 25 °C and cured by lower temperatures compared with commercially-available initiators HX-3088 and HX-3722.

| S-EPMC8600518 | biostudies-literature

Heterogeneous dynamics in the curing process of epoxy resins.

Project description:Epoxy resin is indispensable for modern industry because of its excellent mechanical properties, chemical resistance, and excellent moldability. To date, various methods have been used to investigate the physical properties of the cured product and the kinetics of the curing process, but its microscopic dynamics have been insufficiently studied. In this study, the microscopic dynamics in the curing process of a catalytic epoxy resin were investigated under different temperature conditions utilizing X-ray photon correlation spectroscopy. Our results revealed that the temperature conditions greatly affected the dynamical heterogeneity and cross-linking density of the cured materials. An overview of the microscopic mechanism of the curing process was clearly presented through comparison with the measurement results of other methods, such as 1H-pulse nuclear magnetic resonance spectroscopy. The quantification of such heterogeneous dynamics is particularly useful for optimizing the curing conditions of various materials to improve their physical properties.

| S-EPMC8129072 | biostudies-literature

Synthesis and Thermal Properties of Resorcinol-Furfural Thermosetting Resin.

Project description:A mild and effective synthesis of resorcinol-furfural (RF) thermosetting resin was proposed with ethanol as a distinctive solvent, which, as a usually neglected factor, was shown to not only help form a homogeneous reaction system but also observably reduce the energy barriers between the early intermediates and transition states in addition reactions by explicit solvent effects, drawn from theoretical calculation conclusions. Besides, the para-additions on aromatic rings were more dominant than ortho-additions with the same reactants, which affected the final link types of monomers verified by Fourier transform infrared spectroscopy and two-dimensional nuclear magnetic resonance tests. The prepared resin can be assigned to a relatively fast gel speed and a high residual mass (65.25%) after pyrolysis in a N2 atmosphere by adjusting the molar ratios of F to R, and the curing of that was a complex reaction, with a curing temperature around 149 °C and an activation energy of about 49.11 kJ mol-1 obtained by the Kissinger method.

| S-EPMC7203984 | biostudies-literature

Cold-Curing Structural Epoxy Resins: Analysis of the Curing Reaction as a Function of Curing Time and Thickness.

Project description:The curing reaction of a commercial cold-curing structural epoxy resin, specifically formulated for civil engineering applications, was analyzed by thermal analysis as a function of the curing time and the sample thickness. Original and remarkable results regarding the effects of curing time on the glass transition temperature and on the residual heat of reaction of the cold-cured epoxy were obtained. The influence of the sample thickness on the curing reaction of the cold-cured resin was also deeply investigated. A highly exothermal reaction, based on a self-activated frontal polymerization reaction, was supposed and verified trough a suitable temperature signal acquisition system, specifically realized for this measurement. This is one of the first studies carried out on the curing behavior of these peculiar cold-cured epoxy resins as a function of curing time and thickness.

| S-EPMC5456125 | biostudies-other

Thermosetting Polyurethane Resins as Low-Cost, Easily Scalable, and Effective Oxygen and Moisture Barriers for Perovskite Solar Cells.

Project description:Long-term stability of perovskite solar cells (PSCs) is one of the main issues to be solved for forthcoming commercialization of this technology. In this work, thermosetting polyurethane (PU)-based resins are proposed as effective encapsulants for perovskite solar cells to prevent degradation caused by both moisture and oxygen. Application consists of drop-casting the precursor mixture directly over the devices followed by in situ polymerization, avoiding the use of other adhesives. PUs are cost-effective, lightweight, thermal, and light-stable materials whose mechanical, chemical, and physical properties can be easily tuned by thoughtful choice of their precursor. Encapsulated PSCs show extremely good stability when stored under ambient light (maximum, 1000 lux), controlled humidity (28-65%), and temperature (18-30 °C) by retaining 94% of the initial power conversion efficiency after 2500 h (4 months), whereas control devices lose 90% of their performance after 500 h (T80 = 37 h); once stored according to ISOS-D-1, PU-protected devices showed T80 > 1200 h. Encapsulated devices are stable even when immersed in pure water. The demonstration of PUs as promising solution-processed encapsulant materials for PSCs can pave the way for these to become a cost-effective encapsulation route alternative for future industrialization of this technology.

| S-EPMC8016164 | biostudies-literature

Footprinting SHAPE-eCLIP reveals transcriptome-wide hydrogen bonds at RNA-protein interfaces

Project description:Discovering the interaction mechanism and location of RNA binding proteins (RBPs) on RNA is critical for understanding gene expression regulation. Here, we apply selective 2’-hydroxyl acylation analyzed by primer extension (SHAPE) on in vivo transcripts to identify transcriptome-wide footprints (fSHAPE) on RNA when compared to protein-absent transcripts. Structural analyses indicate that fSHAPE precisely detects nucleotides whose base moieties hydrogen bond with protein and that fSHAPE patterns can predict binding sites of RBPs of interest. To illustrate, we demonstrate that fSHAPE correctly identifies known and novel iron response protein RNA elements. Furthermore, we enable selective interrogation of RNA-protein complexes by integrating SHAPE and fSHAPE with crosslinking and immunoprecipitation (eCLIP) of desired RBPs. To demonstrate, histone stem loop elements and their nucleotides that hydrogen bond with stem-loop binding protein were identified by SHAPE-eCLIP and fSHAPE-eCLIP. Together, these technologies greatly expand on strategies for understanding specific cellular RNA interactions in RNA-protein complexes.

2020-11-30 | GSE149767 | GEO

Boehmite Nanofillers in Epoxy Oligosiloxane Resins: Influencing the Curing Process by Complex Physical and Chemical Interactions.

Project description:In this work, a novel boehmite (BA)-embedded organic/inorganic nanocomposite coating based on cycloaliphatic epoxy oligosiloxane (CEOS) resin was fabricated applying UV-induced cationic polymerization. The main changes of the material behavior caused by the nanofiller were investigated with regard to its photocuring kinetics, thermal stability, and glass transition. The role of the particle surface was of particular interest, thus, unmodified nanoparticles (HP14) and particles modified with p-toluenesulfonic acid (OS1) were incorporated into a CEOS matrix in the concentration range of 1-10 wt.%. Resulting nanocomposites exhibited improved thermal properties, with the glass transition temperature (Tg) being shifted from 30 °C for unfilled CEOS to 54 °C (2 wt.% HP14) and 73 °C (2 wt.% OS1) for filled CEOS. Additionally, TGA analysis showed increased thermal stability of samples filled with nanoparticles. An attractive interaction between boehmite and CEOS matrix influenced the curing. Real-time infrared spectroscopy (RT-IR) experiments demonstrated that the epoxide conversion rate of nanocomposites was slightly increased compared to neat resin. The beneficial role of the BA can be explained by the participation of hydroxyl groups at the particle surface in photopolymerization processes and by the complementary contribution of p-toluenesulfonic acid surface modifier and water molecules introduced into the system with nanoparticles.

| S-EPMC6540208 | biostudies-literature

Selection of UV-resins for nanostructured molds for thermal-NIL.

Project description:Nanoimprint molds made of soft polymeric materials have advantages of low demolding force and low fabrication cost over Si or metal-based hard molds. However, such advantages are often sacrificed by their reduced replication fidelity associated with the low mechanical strength. In this paper, we studied replication fidelity of different UV-resin molds copied from a Si master mold via UV nanoimprint lithography (NIL) and their thermal imprinting performance into a thermoplastic polymer. Four different UV-resins were studied: two were high surface energy UV-resins based on tripropyleneglycol diacrylate (TPGDA resin) and polypropyleneglycol diacrylate (PPGDA resin), and the other two were commercially available, low surface energy poly-urethane acrylate (PUA resin) and fluorine-containing (MD 700) UV-resins. The replication fidelity among the four UV-resins during UV nanoimprint lithograph from a Si master with sharp nanostructures was in the increasing order of (poorest) PUA resin < MD 700 < PPGDA resin < TPGDA resin (best). The results show that the high surface energy and small monomer size are keys to achieving good UV-resin filling into sharp nanostructures over the viscosity of the resin solution. When the four UV-resin molds were used for thermal-NIL into a thermoplastic polymer, the replication fidelity was in the increasing order of (poorest) MD 700 < TPGDA resin < PUA resin (best), which follows the same order of their Young's moduli. Our results indicate that the selection of an appropriate UV-resin for NIL molds requires consideration of the replication fidelities in the mold fabrication and the subsequent thermal-NIL into thermoplastic polymers.

| S-EPMC6532406 | biostudies-literature

Nature of Alkali- and Coinage-Metal Bonds versus Hydrogen Bonds.

Project description:We have quantum chemically studied the structure and nature of alkali- and coinage-metal bonds (M-bonds) versus that of hydrogen bonds between A-M and B- in archetypal [A-M⋅⋅⋅B]- model systems (A, B=F, Cl and M=H, Li, Na, Cu, Ag, Au), using relativistic density functional theory at ZORA-BP86-D3/TZ2P. We find that coinage-metal bonds are stronger than alkali-metal bonds which are stronger than the corresponding hydrogen bonds. Our main purpose is to understand how and why the structure, stability and nature of such bonds are affected if the monovalent central atom H of hydrogen bonds is replaced by an isoelectronic alkali- or coinage-metal atom. To this end, we have analyzed the bonds between A-M and B- using the activation strain model, quantitative Kohn-Sham molecular orbital (MO) theory, energy decomposition analysis (EDA), and Voronoi deformation density (VDD) analysis of the charge distribution.

| S-EPMC7898866 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data