Impact of the TCO Microstructure on the Electronic Properties of Carbazole-Based Self-Assembled Monolayers
Ontology highlight
ABSTRACT:
SUBMITTER: Kralj S
PROVIDER: S-EPMC10848288 | biostudies-literature | 2023 Dec
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:It is known that the electrical conductance of single molecules can be controlled in a deterministic manner by chemically varying their anchor groups to external electrodes. Here, by employing synthetic methodologies to vary the terminal anchor groups around aromatic anthracene cores, and by forming self-assembled monolayers (SAMs) of the resulting molecules, we demonstrate that this method of control can be translated into cross-plane SAM-on-gold molecular films. The cross-plane conductance of SAMs formed from anthracene-based molecules with four different combinations of anchors are measured to differ by a factor of approximately 3 in agreement with theoretical predictions. We also demonstrate that the Seebeck coefficient of such films can be boosted by more than an order of magnitude by an appropriate choice of anchor groups and that both positive and negative Seebeck coefficients can be realised. This demonstration that the thermoelectric properties of SAMs are controlled by their anchor groups represents a critical step towards functional ultra-thin-film devices for future molecular-scale electronics.
| S-EPMC7504895 | biostudies-literature
Project description:The electronic structure of mixed self-assembled monolayers (SAMs) on Au(111) surfaces is modeled using slab-type density-functional theory calculations. The studied molecules have a dipolar character induced by polar and electron donating or accepting tail-group substituents. The resulting electronic structure of mixed layers is found to differ qualitatively from a simple superposition of those of the respective pure layers. Specifically, the positions of the frontier electronic states are shifted relative to the metal Fermi level, with the sign and magnitude of that shift depending on the dipole moment of the molecules and the mixing ratio in the film. This appears counterintuitive considering previous investigations, in which it has been shown that, for densely packed layers, tail-group substituents have no impact on the interfacial energy-level alignment. The seeming contradiction can be lifted by considering the local electrostatic interactions within the films in both mixed and homogeneous monolayers. Beyond that, we show that mixed SAMs provide an efficient tool for continuously tuning substrate work functions over a range that far exceeds that accessible by merely changing the coverage of homogeneous layers, with the net effect depending linearly on the mixing ratio in agreement with recent experimental findings.
| S-EPMC3011841 | biostudies-other
Project description:The performance of graphene devices is often limited by defects and impurities induced during device fabrication. Polymer residue left on the surface of graphene after photoresist processing can increase electron scattering and hinder electron transport. Furthermore, exposing graphene to plasma-based processing such as sputtering of metallization layers can increase the defect density in graphene and alter the device performance. Therefore, the preservation of the high-quality surface of graphene during thin-film deposition and device manufacturing is essential for many electronic applications. Here, we show that the use of self-assembled monolayers (SAMs) of hexamethyldisilazane (HMDS) as a buffer layer during the device fabrication of graphene can significantly reduce damage, improve the quality of graphene, and enhance device performance. The role of HMDS has been systematically investigated using surface analysis techniques and electrical measurements. The benefits of HMDS treatment include a significant reduction in defect density compared with as-treated graphene and more than a 2-fold reduction of contact resistance. This surface treatment is simple and offers a practical route for improving graphene device interfaces, which is important for the integration of graphene into functional devices such as electronics and sensor devices.
| S-EPMC7905810 | biostudies-literature
Project description:The significant contact resistance at the metal-semiconductor interface is a well-documented issue for organic thin-film transistors (OTFTs) that hinders device and circuit performance. Here, this issue is tackled by developing three new thiol carbazole-based self-assembled monolayer (SAM) molecules, namely tBu-2SCz, 2SCz, and Br-2SCz, and utilizing them as carrier-selective injection interlayers. The SAMs alter the work function of gold electrodes by more than 1 eV, making them suitable for use in hole and electron-transporting OTFTs. Scanning tunneling microscopy analysis indicates that 2SCz and Br-2SCz form highly ordered molecular rows, resulting in work function values of 4.86 and 5.48 eV, respectively. The latter value is higher than gold electrodes modified by the commonly used pentafluorobenzenethiol (≈5.33 eV), making Br-2SCz promising for hole injection. Conversely, tBu-2SCz appears disordered with a lower work function of 4.52 eV, making it more suitable for electron injection. These intriguing properties are leveraged to demonstrate hole- and electron-transporting OTFTs with improved operating characteristics. All-organic complementary inverters are finally demonstrated by integrating p- and n-channel OTFTs, showcasing the potential of this simple yet powerful contact work function engineering approach. The present study highlights the versatility of thiol carbazole SAMs as carrier injecting interlayers for OTFTs and integrated circuits.
| S-EPMC11795717 | biostudies-literature
Project description:N-Heterocyclic carbenes (NHC) have been widely studied as ligands for surface chemistry, and have shown advantages compared to existing ligands (e.g. thiols). Herein, we introduce mesoionic carbenes (MICs) as a new type of surface ligand. MICs exhibit higher σ-donor ability compared to typical NHCs, yet they have received little attention in the area of surface chemistry. The synthesis of MICs derived from imidazo[1,2-a]pyridine was established and fully characterized by spectroscopic methods. The self-assembly of these MICs on gold was analyzed by X-ray photoelectron spectroscopy (XPS). Additionally, XPS was used to compare bonding ability in MICs compared to the typical NHCs. These results show that MIC overlayers on gold are robust, resistant to replacement by NHCs, and may be superior to NHCs for applications that require even greater levels of robustness.
| S-EPMC10866350 | biostudies-literature
Project description:Self-assembled monolayers (SAMs) can be formed at the interface between solids and fluids, and are often used to modify the surface properties of the solid. One of the most widely employed SAM systems is exploiting thiol-gold chemistry, which, together with alkane-chain-based molecules, provides a reliable way of SAM formation to modify the surface properties of electrodes. Oligo ethylene-glycol (OEG) terminated alkanethiol monolayers have shown excellent antifouling properties and have been used extensively for the coating of biosensor electrodes to minimize nonspecific binding. Here, we report the investigation of the dielectric properties of COOH-capped OEG monolayers and demonstrate a strategy to improve the dielectric properties significantly by mixing the OEG SAM with small concentrations of 11-mercaptoundecanol (MUD). The monolayer properties and composition were characterized by means of impedance spectroscopy, water contact angle, ellipsometry and X-ray photoelectron spectroscopy. An equivalent circuit model is proposed to interpret the EIS data and to determine the conductivity of the monolayer. We find that for increasing MUD concentrations up to about 5% the resistivity of the SAM steadily increases, which together with a considerable decrease of the phase of the impedance, demonstrates significantly improved dielectric properties of the monolayer. Such monolayers will find widespread use in applications which depend critically on good dielectric properties such as capacitive biosensor.
| S-EPMC4065163 | biostudies-literature
Project description:Polymer-grafted metal-organic frameworks (MOFs) can be used to form free-standing self-assembled MOF monolayers (SAMMs). Polymer chains can be introduced onto MOF surfaces through either the ligands or metal nodes using both grafting-to and grafting-from approaches. However, controlling the grafting density of polymer-grafted MOFs has not yet been achieved, because a means to control the density of grafting sites on the MOF surface has not been developed. In this study, the grafting density of polymer-grafted UiO-66 (UiO = University of Oslo) was controlled by functionalizing a portion of the Zr(IV) secondary building units (SBUs) on a UiO-66 surface with a so-called blocking agent. The remaining sites on the UiO-66 SBUs were functionalized with polymerization initiation groups, and polymers were grown from these sites to obtain particles with variable grafting densities and chain lengths that form SAMMs at an air-water interface. Even under conditions of low grafting density, these materials retain the ability to form SAMMs and their free-standing ability. Changes in particle arrangement within the monolayers were investigated using SEM imaging, and the toughness of the monolayers was evaluated using a film-on-water (FOW) method. Furthermore, coarse-grained molecular dynamics simulations were carried out to elucidate the morphology and mechanical properties of the monolayers. Findings from both experiments and simulations indicate that the toughness of SAMMs is more heavily influenced by the chain length of the grafted polymers than by the overall polymer content in the composite.
| S-EPMC11869284 | biostudies-literature
Project description:Thin films of 1,3-diethylbenzimidazol-2-ylidene (BIEt) were fabricated from THF solution on solid gold substrates and characterised by high-resolution X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopy. The surface-analytical data are in accord with the formation of self-assembled monolayers of BIEt molecules exhibiting an approximately vertical orientation on the substrate. The crystal structure of (BIEt)(2) was also determined.
| S-EPMC3549517 | biostudies-literature
Project description:DNA-water interactions have revealed as very important actor in DNA mechanics, from the molecular to the macroscopic scale. Given the particularly useful properties of DNA molecules to engineer novel materials through self-assembly and by bridging organic and inorganic materials, the interest in understanding DNA elasticity has crossed the boundaries of life science to reach also materials science and engineering. Here we show that thin films of DNA constructed through the self-assembly of sulfur tethered ssDNA strands demonstrate a Young's modulus tuning range of about 10 GPa by simply varying the environment relative humidity from 0% up to 70%. We observe that the highest tuning range occurs for ssDNA grafting densities of about 3.5 × 1013 molecules/cm 2, where the distance between the molecules maximizes the water mediated interactions between the strands. Upon hybridization with the complementary strand, the DNA self-assembled monolayers significantly soften by one order of magnitude and their Young's modulus dependency on the hydration state drastically decreases. The experimental observations are in agreement with molecular dynamics simulations.
| S-EPMC5428875 | biostudies-literature
Project description:Controlling the nature of the electronic states within organic layers holds the promise of truly molecular electronics. To achieve that we, here, develop a modular concept for a versatile tuning of electronic properties in organic monolayers and their interfaces. The suggested strategy relies on directly exploiting collective electrostatic effects, which emerge naturally in an ensemble of polar molecules. By means of quantum-mechanical modeling we show that in this way monolayer-based quantum-cascades and quantum-well structures can be realized, which allow a precise control of the local electronic structure and the localization of electronic states. Extending that concept, we furthermore discuss strategies for activating spin sensitivity in specific regions of an organic monolayer.
| S-EPMC4973851 | biostudies-literature