Author Correction: Static friction coefficient depends on the external pressure and block shape due to precursor slip.
Ontology highlight
ABSTRACT:
SUBMITTER: Iwashita W
PROVIDER: S-EPMC10915153 | biostudies-literature | 2024 Mar
REPOSITORIES: biostudies-literature
Publications
Author Correction: Static friction coefficient depends on the external pressure and block shape due to precursor slip.
Iwashita Wataru W Matsukawa Hiroshi H Otsuki Michio M
Scientific reports 20240305 1
Similar Datasets
Project description:Amontons' law states that the maximum static friction force on a solid object is proportional to the loading force and is independent of the apparent contact area. This law indicates that the static friction coefficient does not depend on the external pressure or object shape. Here, we numerically investigate the sliding motion of a 3D viscoelastic block on a rigid substrate using the finite element method (FEM). The macroscopic static friction coefficient decreases with an increase in the external pressure, length, or width of the object, which contradicts Amontons' law. Precursor slip occurs in the 2D interface between the block and substrate before bulk sliding. The decrease in the macroscopic static friction coefficient is scaled by the critical area of the precursor slip. A theoretical analysis of the simplified models reveals that bulk sliding results from the instability of the quasi-static precursor slip caused by velocity-weakening local friction. We also show that the critical slip area determines the macroscopic static friction coefficient, which explains the results of the FEM simulation.
| S-EPMC9925803 | biostudies-literature
Project description:The sliding of a solid object on a solid substrate requires a shear force that is larger than the maximum static friction force. It is commonly believed that the maximum static friction force is proportional to the loading force and does not depend on the apparent contact area. The ratio of the maximum static friction force to the loading force is called the static friction coefficient µM, which is considered to be a constant. Here, we conduct experiments demonstrating that the static friction force of a slider on a substrate follows a novel friction law under certain conditions. The magnitude of µM decreases as the loading force increases or as the apparent contact area decreases. This behavior is caused by the slip of local precursors before the onset of bulk sliding and is consistent with recent theory. The results of this study will develop novel methods for static friction control.
| S-EPMC4159624 | biostudies-literature
Project description:Mechanical testers have commonly been used to measure the frictional properties of socks. However, the friction values may be susceptible to the level of stretchiness of tested fabrics or human variability. Thus, the aim of this study was to propose a novel method that enables friction measurement of socks in a sock-wearing condition with less human variability effects. Five socks with different frictional properties were chosen. Three experimental ramp tests were performed with an artificial structure shaped like the foot-ankle complex (last) and a ramp tester to quantify the static coefficient of friction (COF) at the foot against sock, at the sock against an insole, and the foot wearing socks against the insole, respectively. The angle where the last slipped while the ramp surface was gradually inclined was used to compute the static COF values for each sock. The reliability was 0.99, and COF values ranged from 0.271 to 0.861 at the foot-sock interface, 0.342 to 0.639 at the sock-insole interface, and 0.310 to 0.614 in the third test. Socks with different frictional properties were successfully distinguished each other. Thus, the suggested protocol could be a reliable option for measuring the static COF values in the tension similar with it found in a sock-waring condition with reduced effects of human variability.
| S-EPMC9329795 | biostudies-literature
Project description:Friction between dielectric surfaces produces patterns of fixed, stable electric charges that in turn contribute electrostatic components to surface interactions between the contacting solids. The literature presents a wealth of information on the electronic contributions to friction in metals and semiconductors but the effect of triboelectricity on friction coefficients of dielectrics is as yet poorly defined and understood. In this work, friction coefficients were measured on tribocharged polytetrafluoroethylene (PTFE), using three different techniques. As a result, friction coefficients at the macro- and nanoscales increase many-fold when PTFE surfaces are tribocharged, but this effect is eliminated by silanization of glass spheres rolling on PTFE. In conclusion, tribocharging may supersede all other contributions to macro- and nanoscale friction coefficients in PTFE and probably in other insulating polymers.
| S-EPMC3740278 | biostudies-literature
Project description:The data on the static friction coefficient (µ) resulting between a surface and a friction block covered with shredded rubber produced from used commercial tires at varying granule sizes are presented. The tests are done using different types of plates such as, glass, Poly Vinyl Chloride (PVC) plastics, wood, concrete, marble, ceramic and sand paper to represent rough and smooth surfaces in contact with shredded rubber granule of sizes 1.18 mm, 0.6 mm, 0.425 mm, 0.3 mm, and 0.15 mm. The coefficient of static friction is calculated using Coulomb׳s Law of dry friction and the data are compared based on the granule sizes variability. The data are represented in tables and figures. The data are in an almost uniform trend among the surfaces starting with a lower coefficient of friction for 1.18 mm to 0.6 mm, reached the highest at 0.425 mm and drops eventually as soon as the granules are finer.
| S-EPMC6355959 | biostudies-literature
Project description:Friction between two rough solid surfaces often involves local stick-slip events occurring at different locations of the contact interface. If the apparent contact area is large, multiple local slips may take place simultaneously and the total frictional force is a sum of the pinning forces imposed by many asperities on the interface. Here, we report a systematic study of stick-slip friction over a mesoscale contact area using a hanging-beam lateral atomic-force-microscope, which is capable of resolving frictional force fluctuations generated by individual slip events and measuring their statistical properties at the single-slip resolution. The measured probability density functions (PDFs) of the slip length δxs, the maximal force Fc needed to trigger the local slips, and the local force gradient [Formula: see text] of the asperity-induced pinning force field provide a comprehensive statistical description of stick-slip friction that is often associated with the avalanche dynamics at a critical state. In particular, the measured PDF of δxs obeys a power law distribution and the power-law exponent is explained by a new theoretical model for the under-damped spring-block motion under a Brownian-correlated pinning force field. This model provides a long-sought physical mechanism for the avalanche dynamics in stick-slip friction at mesoscale.
| S-EPMC10556047 | biostudies-literature
Project description:Stick-slip friction was observed in articular cartilage under certain loading and sliding conditions and systematically studied. Using the Surface Forces Apparatus, we show that stick-slip friction can induce permanent morphological changes (a change in the roughness indicative of wear/damage) in cartilage surfaces, even under mild loading and sliding conditions. The different load and speed regimes can be represented by friction maps--separating regimes of smooth and stick-slip sliding; damage generally occurs within the stick-slip regimes. Prolonged exposure of cartilage surfaces to stick-slip sliding resulted in a significant increase of surface roughness, indicative of severe morphological changes of the cartilage superficial zone. To further investigate the factors that are conducive to stick-slip and wear, we selectively digested essential components of cartilage: type II collagen, hyaluronic acid (HA), and glycosaminoglycans (GAGs). Compared with the normal cartilage, HA and GAG digestions modified the stick-slip behavior and increased surface roughness (wear) during sliding, whereas collagen digestion decreased the surface roughness. Importantly, friction forces increased up to 2, 10, and 5 times after HA, GAGs, and collagen digestion, respectively. Also, each digestion altered the friction map in different ways. Our results show that (i) wear is not directly related to the friction coefficient but (ii) more directly related to stick-slip sliding, even when present at small amplitudes, and that (iii) the different molecular components of joints work synergistically to prevent wear. Our results also suggest potential noninvasive diagnostic tools for sensing stick-slip in joints.
| S-EPMC3574935 | biostudies-literature
Project description:Utilizing colloidal probe, lateral force microscopy and simultaneous confocal microscopy, combined with finite element analysis, we investigate how a microparticle starts moving laterally on a soft, adhesive surface. We find that the surface can form a self-contacting crease at the leading front, which results from a buildup of compressive stress. Experimentally, creases are observed on substrates that exhibit either high or low adhesion when measured in the normal direction, motivating the use of simulations to consider the role of adhesion energy and interfacial strength. Our simulations illustrate that the interfacial strength plays a dominating role in the nucleation of a crease. After the crease forms, it progresses through the contact zone in a Schallamach wave-like fashion. Interestingly, our results suggest that this Schallamach wave-like motion is facilitated by free slip at the adhesive, self-contacting interface within the crease.
| S-EPMC10126204 | biostudies-literature
Project description:In a pioneer experiment, Bohlein et al. realized the controlled sliding of two-dimensional colloidal crystals over laser-generated periodic or quasi-periodic potentials. Here we present realistic simulations and arguments that besides reproducing the main experimentally observed features give a first theoretical demonstration of the potential impact of colloid sliding in nanotribology. The free motion of solitons and antisolitons in the sliding of hard incommensurate crystals is contrasted with the soliton-antisoliton pair nucleation at the large static friction threshold F(s) when the two lattices are commensurate and pinned. The frictional work directly extracted from particles' velocities can be analyzed as a function of classic tribological parameters, including speed, spacing, and amplitude of the periodic potential (representing, respectively, the mismatch of the sliding interface and the corrugation, or "load"). These and other features suggestive of further experiments and insights promote colloid sliding to a unique friction study instrument.
| S-EPMC3478638 | biostudies-literature
Project description:The friction of a solid contact typically shows a positive dependence on normal load according to classic friction laws. A few exceptions were recently observed for nanoscale single-asperity contacts. Here, we report the experimental observation of negative friction coefficient in microscale monocrystalline heterojunctions at different temperatures. The results for the interface between graphite and muscovite mica heterojunction demonstrate a robust negative friction coefficient both in loading and unloading processes. Molecular dynamics simulations reveal that the underlying mechanism is a synergetic and nontrivial redistribution of water molecules at the interface, leading to larger density and more ordered structure of the confined subnanometer-thick water film. Our results are expected to be applicable to other hydrophilic van der Waals heterojunctions.
| S-EPMC7164938 | biostudies-literature