Dataset Information

Automated counting of airborne asbestos fibers by a high-throughput microscopy (HTM) method.

ABSTRACT: Inhalation of airborne asbestos causes serious health problems such as lung cancer and malignant mesothelioma. The phase-contrast microscopy (PCM) method has been widely used for estimating airborne asbestos concentrations because it does not require complicated processes or high-priced equipment. However, the PCM method is time-consuming and laborious as it is manually performed off-site by an expert. We have developed a high-throughput microscopy (HTM) method that can detect fibers distinguishable from other spherical particles in a sample slide by image processing both automatically and quantitatively. A set of parameters for processing and analysis of asbestos fiber images was adjusted for standard asbestos samples with known concentrations. We analyzed sample slides containing airborne asbestos fibers collected at 11 different workplaces following PCM and HTM methods, and found a reasonably good agreement in the asbestos concentration. Image acquisition synchronized with the movement of the robotic sample stages followed by an automated batch processing of a stack of sample images enabled us to count asbestos fibers with greatly reduced time and labors. HTM should be a potential alternative to conventional PCM, moving a step closer to realization of on-site monitoring of asbestos fibers in air.

SUBMITTER: Cho MO

PROVIDER: S-EPMC3231659 | biostudies-literature | 2011

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Automated counting of airborne asbestos fibers by a high-throughput microscopy (HTM) method.

Cho Myoung-Ock MO Yoon Seonghee S Han Hwataik H Kim Jung Kyung JK

Sensors (Basel, Switzerland) 20110718 7

Inhalation of airborne asbestos causes serious health problems such as lung cancer and malignant mesothelioma. The phase-contrast microscopy (PCM) method has been widely used for estimating airborne asbestos concentrations because it does not require complicated processes or high-priced equipment. However, the PCM method is time-consuming and laborious as it is manually performed off-site by an expert. We have developed a high-throughput microscopy (HTM) method that can detect fibers distinguish ...[more]

PMID: 22164014

Similar Datasets

Project description:In recent years, the role of sympathetic nervous fibers in chronic inflammation has become increasingly evident. At the onset of inflammation, sympathetic activity is increased in the affected tissue. However, sympathetic fibers are largely absent from chronically inflamed tissues. Apparently, there is a very dynamic relationship between sympathetic innervation and the immune system in areas of inflammation, and hence a rapid and easy method for quantification of nerve fiber density of target organs is of great value to answer potential research questions. Sympathetic nerve ends lie in close proximity to immune cells in lymphoid tissues and lymphoid cells are equipped with catecholamine receptors. Catecholamines such as dopamine and adrenaline are secreted by sympathetic nervous fibers and can influence immune cell activity directly. Thereby the sympathetic nervous system immediately participates in the regulation of inflammation. Changes in innervation density could therefore indicate dysregulation of inflammatory processes. Currently, nervous fiber densities are either determined by tedious manual counting, which is not suitable for high throughput approaches, or by expensive automated processes relying on specialized software and high-end microscopy equipment. Usually, tyrosine hydroxylase (TH) is used as the marker for sympathetic fibers. In order to overcome the current quantification bottleneck with a cost-efficient alternative, an automated process was established and compared to the classic manual approach of counting TH-positive sympathetic fibers. Since TH is not exclusively expressed on sympathetic fibers, but also in a number of catecholamine-producing cells, a prerequisite for automated determination of fiber densities is to reliably distinguish between cells and fibers. Therefore, an additional stain using peripherin which is exclusively expressed in nervous fibers as a secondary marker was established. This new and simple method can be used as a high-throughput approach to reliably and quickly estimate sympathetic nervous system (SNS) nerve fiber density in target tissues.

Project description:BackgroundFrustrated phagocytosis occurs when an asbestos fiber > 10 μm in length is engulfed imperfectly by a macrophage, and it is believed to be associated with chromosomal instability. Few studies have focused on dynamic cellular imaging to assess the toxicity of hazardous inorganic materials such as asbestos. One reason for this is the relative lack of fluorescent probes available to facilitate experimental visualization of inorganic materials. We recently developed asbestos-specific fluorescent probes based on asbestos-binding proteins, and achieved efficient fluorescent labeling of asbestos.ResultsLive-cell imaging with fluorescent asbestos probes was successfully utilized to dynamically analyze asbestos phagocytosis. The fluorescently labeled asbestos fibers were phagocytosed by RAW 264.7 macrophages. Internalized fibers of < 5 μm in length were visualized clearly via overlaid phase contrast and fluorescence microscopy images, but they were not clearly depicted using phase contrast images alone. Approximately 60% of the cells had phagocytosed asbestos fibers after 2 h, but over 96% of cells remained alive even 24 h after the addition of asbestos fibers. Immediate cell death was only observed when an asbestos fiber was physically pulled from a cell by an external force. Notably, at 24 h after the addition of asbestos fibers an approximately 4-fold increase in the number of binucleated cells was observed. Monitoring of individual cell divisions of cells that had phagocytosed asbestos suggested that binucleated cells were formed via the inhibition of cell separation, by asbestos fibers of > 10 μm in length that were localized in the proximity of the intercellular bridge.ConclusionsFluorescently labeled asbestos facilitated visualization of the dynamic biological processes that occur during and after the internalization of asbestos fibers, and indicated that (i) frustrated phagocytosis itself does not lead to immediate cell death unless the asbestos fiber is physically pulled from the cell by an external force, and (ii) macrophages that have phagocytosed asbestos can divide but sometimes the resulting daughter cells fuse, leading to the formation of a binucleated cell. This fusion only seemed to occur when a comparatively long asbestos fiber (> 10 μm) was shared by two daughter cells.

Dataset Information

Automated counting of airborne asbestos fibers by a high-throughput microscopy (HTM) method.

Publications

Automated counting of airborne asbestos fibers by a high-throughput microscopy (HTM) method.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets