Dataset Information

Cough aerosol in healthy participants: fundamental knowledge to optimize droplet-spread infectious respiratory disease management.

ABSTRACT: The Influenza A H1N1 virus can be transmitted via direct, indirect, and airborne route to non-infected subjects when an infected patient coughs, which expels a number of different sized droplets to the surrounding environment as an aerosol. The objective of the current study was to characterize the human cough aerosol pattern with the aim of developing a standard human cough bioaerosol model for Influenza Pandemic control.45 healthy non-smokers participated in the open bench study by giving their best effort cough. A laser diffraction system was used to obtain accurate, time-dependent, quantitative measurements of the size and number of droplets expelled by the cough aerosol.Voluntary coughs generated droplets ranging from 0.1 - 900 microns in size. Droplets of less than one-micron size represent 97% of the total number of measured droplets contained in the cough aerosol. Age, sex, weight, height and corporal mass have no statistically significant effect on the aerosol composition in terms of size and number of droplets.We have developed a standard human cough aerosol model. We have quantitatively characterized the pattern, size, and number of droplets present in the most important mode of person-to-person transmission of IRD: the cough bioaerosol. Small size droplets (< 1 ?m) predominated the total number of droplets expelled when coughing. The cough aerosol is the single source of direct, indirect and/or airborne transmission of respiratory infections like the Influenza A H1N1 virus.Open bench, Observational, Cough, Aerosol study.

SUBMITTER: Zayas G

PROVIDER: S-EPMC3331822 | biostudies-literature | 2012 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Cough aerosol in healthy participants: fundamental knowledge to optimize droplet-spread infectious respiratory disease management.

Zayas Gustavo G Chiang Ming C MC Wong Eric E MacDonald Fred F Lange Carlos F CF Senthilselvan Ambikaipakan A King Malcolm M

BMC pulmonary medicine 20120321

<h4>Background</h4>The Influenza A H1N1 virus can be transmitted via direct, indirect, and airborne route to non-infected subjects when an infected patient coughs, which expels a number of different sized droplets to the surrounding environment as an aerosol. The objective of the current study was to characterize the human cough aerosol pattern with the aim of developing a standard human cough bioaerosol model for Influenza Pandemic control.<h4>Method</h4>45 healthy non-smokers participated in t ...[more]

PMID: 22436202

Similar Datasets

Project description:Health care workers are exposed to potentially infectious airborne particles while providing routine care to coughing patients. However, much is not understood about the behavior of these aerosols and the risks they pose. We used a coughing patient simulator and a breathing worker simulator to investigate the exposure of health care workers to cough aerosol droplets, and to examine the efficacy of face shields in reducing this exposure. Our results showed that 0.9% of the initial burst of aerosol from a cough can be inhaled by a worker 46 cm (18 inches) from the patient. During testing of an influenza-laden cough aerosol with a volume median diameter (VMD) of 8.5 μm, wearing a face shield reduced the inhalational exposure of the worker by 96% in the period immediately after a cough. The face shield also reduced the surface contamination of a respirator by 97%. When a smaller cough aerosol was used (VMD = 3.4 μm), the face shield was less effective, blocking only 68% of the cough and 76% of the surface contamination. In the period from 1 to 30 minutes after a cough, during which the aerosol had dispersed throughout the room and larger particles had settled, the face shield reduced aerosol inhalation by only 23%. Increasing the distance between the patient and worker to 183 cm (72 inches) reduced the exposure to influenza that occurred immediately after a cough by 92%. Our results show that health care workers can inhale infectious airborne particles while treating a coughing patient. Face shields can substantially reduce the short-term exposure of health care workers to large infectious aerosol particles, but smaller particles can remain airborne longer and flow around the face shield more easily to be inhaled. Thus, face shields provide a useful adjunct to respiratory protection for workers caring for patients with respiratory infections. However, they cannot be used as a substitute for respiratory protection when it is needed. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: tables of the experiments performed, more detailed information about the aerosol measurement methods, photographs of the experimental setup, and summaries of the experimental data from the aerosol measurement devices, the qPCR analysis, and the VPA.].

Project description:ObjectivesThis study evaluated particle spread associated with various common periodontal aerosol-generating procedures (AGPs) in simulated and clinical settings.Materials and methodsA simulation study visualized the aerosols, droplets, and splatter spread with and without high-volume suction (HVS, 325 L/min) during common dental AGPs, namely ultrasonic scaling, air flow prophylaxis, and implant drilling after fluorescein dye was added to the water irrigant as a tracer. Each procedure was repeated 10 times. A complementary clinical study measured the spread of contaminated particles within the dental operatory and quantified airborne protein dispersion following 10 min of ultrasonic supragingival scaling of 19 participants during routine periodontal treatment.ResultsThe simulation study data showed that air flow produced the highest amount of splatters and the ultrasonic scaler generated the most aerosol and droplet particles at 1.2 m away from the source. The use of HVS effectively reduced 37.5-96% of splatter generation for all three dental AGPs, as well as 82-93% of aerosol and droplet particles at 1.2 m for the ultrasonic scaler and air polisher. In the clinical study, higher protein levels above background levels following ultrasonic supragingival scaling were detected in fewer than 20% of patients, indicating minimal particle spread.ConclusionsWhile three common periodontal AGPs produce aerosols and droplet particles up to at least 1.2 m from the source, the use of HVS is of significant benefit. Routine ultrasonic supragingival scaling produced few detectable traces of salivary protein at various sites throughout the 10-min dental operatory.Clinical relevanceThe likelihood of aerosol spread to distant sites during common periodontal AGPs is greatly reduced by high-volume suction. Clinically, limited evidence of protein contaminants was found following routine ultrasonic scaling, suggesting that the the majority of the contamination consisits of the irrigant rather than organic matter from the oral cavity.

Project description:Background: Many tools used to analyze microarrays in different conditions have been described. However, the integration of the deregulated genes within coherent metabolic pathways is lacking. Currently no objective selection criterion, based on biological functions exists, to determine a threshold demonstrating that a gene is indeed differentially expressed. Methodology/Principal Findings: To improve transcriptomic analysis of microarrays, we propose a new statistical approach, which takes into account biological parameters. We present an iterative method to optimise the selection of differentially expressed gene in two experimental conditions. The stringency level of gene selection was associated simultaneously with the p-value of expression variation and the occurrence rate parameter, which is associated with the percentage of donors whose transcriptomic profile is similar. Our method intertwines stringency level settings, biological data and a knowledge database to highlight molecular interactions using networks and pathways. Analysis performed during iterations helped us select the optimal threshold required for the most pertinent selection of differently expressed genes. Conclusions/significance: We have applied this approach to the well documented mechanism of human macrophage response to lipopolysaccharide stimulation. For example, we thus verified that our method was able to determine with the highest degree of accuracy the best threshold for selecting genes, which are truly differentially expressed. Macrophages isolated from six heathy donnor was/or not stimulated. Paired data, i.e. LPS stimulated macrophages versus unstimulated macrophages from the same donor have been compared (eg, Donor1_LPS vs Donor1_NT; see processed data file linked below). The six comparaisons have been globaly analyse using two parameters, i.e. threshod and occurency, associated with a request of a database knowledge. Both parameters has been tune to define the best setting allowing to optimize the selection of differentially expressed genes

Project description:Many governments have instructed the population to wear simple mouse-and-nose covers or surgical face masks to protect themselves from droplet infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in public. However, the basic protection mechanisms and benefits of these masks remain controversial. Therefore, the aim of this work is to show from a fluid physics point of view under which circumstances these masks can protect against droplet infection. First of all, we show that the masks protect people in the surrounding area quite well, since the flow resistance of the face masks effectively prevents the spread of exhaled air, e.g. when breathing, speaking, singing, coughing and sneezing. Secondly, we provide visual evidence that typical household materials used by the population to make masks do not provide highly efficient protection against respirable particles and droplets with a diameter of 0.3-2 ?m as they pass through the materials largely unfiltered. According to our tests, only vacuum cleaner bags with fine dust filters show a comparable or even better filtering effect than commercial particle filtering FFP2/N95/KN95 half masks. Thirdly, we show that even simple mouse-and-nose covers made of good filter material cannot reliably protect against droplet infection in contaminated ambient air, since most of the air flows through gaps at the edge of the masks. Only a close-fitting, particle-filtering respirator offers good self-protection against droplet infection. Nevertheless, wearing simple homemade or surgical face masks in public is highly recommended if no particle filtrating respiratory mask is available. Firstly, because they protect against habitual contact of the face with the hands and thus serve as self-protection against contact infection. Secondly, because the flow resistance of the masks ensures that the air remains close to the head when breathing, speaking, singing, coughing and sneezing, thus protecting other people if they have sufficient distance from each other. However, if the distance rules cannot be observed and the risk of inhalation-based infection becomes high because many people in the vicinity are infectious and the air exchange rate is small, improved filtration efficiency masks are needed, to take full advantage of the three fundamental protective mechanisms these masks provide.

Dataset Information

Cough aerosol in healthy participants: fundamental knowledge to optimize droplet-spread infectious respiratory disease management.

Publications

Cough aerosol in healthy participants: fundamental knowledge to optimize droplet-spread infectious respiratory disease management.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets