The urgency of the development of CO2 capture from ambient air.
Ontology highlight
ABSTRACT:
SUBMITTER: Lackner KS
PROVIDER: S-EPMC3421162 | biostudies-literature | 2012 Aug
REPOSITORIES: biostudies-literature
Publications
The urgency of the development of CO2 capture from ambient air.
Lackner Klaus S KS Brennan Sarah S Matter Jürg M JM Park A-H Alissa AH Wright Allen A van der Zwaan Bob B
Proceedings of the National Academy of Sciences of the United States of America 20120727 33
CO(2) capture and storage (CCS) has the potential to develop into an important tool to address climate change. Given society's present reliance on fossil fuels, widespread adoption of CCS appears indispensable for meeting stringent climate targets. We argue that for conventional CCS to become a successful climate mitigation technology--which by necessity has to operate on a large scale--it may need to be complemented with air capture, removing CO(2) directly from the atmosphere. Air capture of C ...[more]
Similar Datasets
Project description:This study reports a preparation method of a new moisture swing sorbent for CO2 capture from air. The new sorbent components include ion exchange resin (IER) and polyvinyl chloride (PVC) as a binder. The IER can absorb CO2 when surrounding is dry and release CO2 when surrounding is wet. The manuscript presents the studies of membrane structure, kinetic model of absorption process, performance of desorption process and the diffusivity of water molecules in the CO2 absorbent. It has been proved that the kinetic performance of CO2 absorption/desorption can be improved by using thin binder and hot water treatment. The fast kinetics of P-100-90C absorbent is due to the thin PVC binder, and high diffusion rate of H2O molecules in the sample. The impressive is this new CO2 absorbent has the fastest CO2 absorption rate among all absorbents which have been reported by other up-to-date literatures.
| S-EPMC5480984 | biostudies-literature
Project description:Capturing carbon dioxide from the atmosphere ("air capture") in an industrial process has been proposed as an option for stabilizing global CO(2) concentrations. Published analyses suggest these air capture systems may cost a few hundred dollars per tonne of CO(2), making it cost competitive with mainstream CO(2) mitigation options like renewable energy, nuclear power, and carbon dioxide capture and storage from large CO(2) emitting point sources. We investigate the thermodynamic efficiencies of commercial separation systems as well as trace gas removal systems to better understand and constrain the energy requirements and costs of these air capture systems. Our empirical analyses of operating commercial processes suggest that the energetic and financial costs of capturing CO(2) from the air are likely to have been underestimated. Specifically, our analysis of existing gas separation systems suggests that, unless air capture significantly outperforms these systems, it is likely to require more than 400 kJ of work per mole of CO(2), requiring it to be powered by CO(2)-neutral power sources in order to be CO(2) negative. We estimate that total system costs of an air capture system will be on the order of $1,000 per tonne of CO(2), based on experience with as-built large-scale trace gas removal systems.
| S-EPMC3251141 | biostudies-literature
Project description:To avoid dangerous climate change, new technologies must remove billions of tonnes of CO2 from the atmosphere every year by mid-century. Here we detail a land-based enhanced weathering cycle utilizing magnesite (MgCO3) feedstock to repeatedly capture CO2 from the atmosphere. In this process, MgCO3 is calcined, producing caustic magnesia (MgO) and high-purity CO2. This MgO is spread over land to carbonate for a year by reacting with atmospheric CO2. The carbonate minerals are then recollected and re-calcined. The reproduced MgO is spread over land to carbonate again. We show this process could cost approximately $46-159 tCO2-1 net removed from the atmosphere, considering grid and solar electricity without post-processing costs. This technology may achieve lower costs than projections for more extensively engineered Direct Air Capture methods. It has the scalable potential to remove at least 2-3 GtCO2 year-1, and may make a meaningful contribution to mitigating climate change.
| S-EPMC7335196 | biostudies-literature
Project description:Conjugated microporous polymers are a new class of porous materials with an extended ?-conjugation in an amorphous organic framework. Owing to the wide-ranging flexibility in the choice and design of components and the available control of pore parameters, these polymers can be tailored for use in various applications, such as gas storage, electronics and catalysis. Here we report a class of cobalt/aluminium-coordinated conjugated microporous polymers that exhibit outstanding CO2 capture and conversion performance at atmospheric pressure and room temperature. These polymers can store CO2 with adsorption capacities comparable to metal-organic frameworks. The cobalt-coordinated conjugated microporous polymers can also simultaneously function as heterogeneous catalysts for the reaction of CO2 and propylene oxide at atmospheric pressure and room temperature, wherein the polymers demonstrate better efficiency than a homogeneous salen-cobalt catalyst. By combining the functions of gas storage and catalysts, this strategy provides a direction for cost-effective CO2 reduction processes.
| S-EPMC3709476 | biostudies-literature
Project description:Several reactions, known from other amine systems for CO2 capture, have been proposed for Lewatit R VP OC 1065. The aim of this molecular modeling study is to elucidate the CO2 capture process: the physisorption process prior to the CO2-capture and the reactions. Molecular modeling yields that the resin has a structure with benzyl amine groups on alternating positions in close vicinity of each other. Based on this structure, the preferred adsorption mode of CO2 and H2O was established. Next, using standard Density Functional Theory two catalytic reactions responsible for the actual CO2 capture were identified: direct amine and amine-H2O catalyzed formation of carbamic acid. The latter is a new type of catalysis. Other reactions are unlikely. Quantitative verification of the molecular modeling results with known experimental CO2 adsorption isotherms, applying a dual site Langmuir adsorption isotherm model, further supports all results of this molecular modeling study.
| S-EPMC5678289 | biostudies-literature
Project description:Sequestration of CO2, either from gas mixtures or directly from air (direct air capture), is a technological goal important to large-scale industrial processes such as gas purification and the mitigation of carbon emissions. Previously, we investigated five porous materials, three porous metal-organic materials (MOMs), a benchmark inorganic material, ZEOLITE 13X: and a chemisorbent, TEPA-SBA-15: , for their ability to adsorb CO2 directly from air and from simulated flue-gas. In this contribution, a further 10 physisorbent materials that exhibit strong interactions with CO2 have been evaluated by temperature-programmed desorption for their potential utility in carbon capture applications: four hybrid ultramicroporous materials, SIFSIX-3-CU: , DICRO-3-NI-I: , SIFSIX-2-CU-I: and MOOFOUR-1-NI: ; five microporous MOMs, DMOF-1: , ZIF-8: , MIL-101: , UIO-66: and UIO-66-NH2: ; an ultramicroporous MOM, NI-4-PYC: The performance of these MOMs was found to be negatively impacted by moisture. Overall, we demonstrate that the incorporation of strong electrostatics from inorganic moieties combined with ultramicropores offers improved CO2 capture performance from even moist gas mixtures but not enough to compete with chemisorbents.This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.
| S-EPMC5179930 | biostudies-literature
Project description: Not available
| S-EPMC11342364 | biostudies-literature
Project description:Semiclathrate hydrates of tetra-n-butylammonium fluoride (TBAF) are potential CO2 capture media because they can capture CO2 at near ambient temperature under moderate pressure such as below 1 MPa. In addition to other semiclathrate hydrates, CO2 capture properties of TBAF hydrates may vary with formation conditions such as aqueous composition and pressure because of their complex hydrate structures. In this study, we investigated CO2 capture properties of TBAF hydrates for simulated flue gas, that is, CO2 + N2 gas, by the gas separation test with three different parameters for each pressure and aqueous composition of TBAF in mass fraction (w TBAF). The CO2 capture amount in TBAF hydrates with w TBAF = 0.10 was smaller than that obtained with w TBAF = 0.20 and 0.30. The results found that gas pressure greatly changed the CO2 capture amount in TBAF hydrates, and the aqueous composition highly affected CO2 selectivity. The crystal morphology and single-crystal structure analyses suggested that polymorphism of TBAF hydrates with congruent aqueous solution may lower both the CO2 capture amount and selectivity. Our present results proposed that an aqueous solution with w TBAF = 0.20 is advantageous for the CO2 capture from flue gas compared to near congruent solutions of TBAF hydrates (w TBAF = 0.30) and dilute solution (w TBAF = 0.10).
| S-EPMC7143428 | biostudies-literature
Project description:We were awarded a BBSRC grant about a year ago to undertake some affymetrix gene chip profiling of light and CO2 systemic signalling in Arabidopsis. The design of the proposed experiment is given below and the appropriate funding has been provided by the BBSRC. The aim of the project is to identify the temporal profile of those genes that respond to light and CO2 systemic signals in developing leaves. Moreover, as thes two signals have opposing effects on leaf development to ascertain whether they involve similar or parallel signalling pathways. The experiment is to examine the effect of exposing mature leaves to high CO2 or low light or both on the gene expression profile of developing leaves. We already have data for maize that changes in gene expression profile occur within 4h and that there are a variety of temporal responses that differ between individual gene transcripts. We have also demonstrated that Arabidopsis leaf development is altered by these systemmic signals and that lesions in the jasmonate and ethylene signalling pathways block these responses. Our experimental design is shown below: We have 4 treatments and 7 timepoints. (0, 2, 4, 12, 24, 48, 96 h) We would sample from 5 individual plants that would be pooled for each RNA preparation. This would require 28 chips and this would include extra replication of the 0 time-point control (deemed by many as nessary). Experimental details: All plants were germinated for 7 days under the following conditions: Humax multi-purpose compost, ambient carbon dioxide (370 ppm) and ambient light (250 µmol/m/s), constant temperature of 20°C and a 10 h photoperiod (8 am until 6 pm). After a week the the seedlings were potted up into 104-cell plug trays for a further 2 weeks and then potted up into 10 cm pots and the bottom part of the signalling cuvette system attached (see Lake et al., Nature 10th May 2001 Vol. 411, pp 154). Twenty four, 4 week old plants, then had the top part of the signalling system attached, trapping leaf insertions 5-13. Humidified, ambient air was passed through them at 500 mls/min via an oil-free air compressor. The three target leaves (19-21) were then marked with non-toxic, acrylic paint. After a 24 h period (the plants were sealed into the cuvettes from 10 am until 10am) of adjustment, the experiment was started by harvesting the target leaves from 4 plants and immediately freezing the tissue in liquid nitrogen to give the 0 h sample before RNA extraction. The remaining 20 plants were divided into 4 groups of five and given one of the following treatments: Ambient carbon dioxide/ambient light (Control) (A) Elevated carbon dioxide (750 ppm)/ambient light (E) Ambient carbon dioxide/low light (50 µmol/m/s) (AS) Elevated carbon dioxide/low light (ES) - For the Elevated CO2, elevated CO2 was pumped in using a CT room next door set to same temperature but with a CO2 cylinder inside and the same pump as used in the ambient room to supply the elevated CO2 laden, humidified air into the signalling room using rubber tubing. - Shade treatment consisted of neutral density filter (Cat. 210 0.6ND, Lee Filters) that had a hole cut in the middle to allow the middle developing leaves to grow through. A timecourse of 2, 4, 12, 24, 48 and 96 h were carried out each using a batch of 24 plants. This whole process was repeated with another batch of 24 plants at the same developmental stage to give a 2, 4, 12, 24, 48 and 96 hour sample from each of the four treatments. The whole timecourse was then repeated 4 times. For the mature leaves: We had 8 chips left over so we devised this little experiment to assess the gene changes that were occurring in the enclosed, treated, mature leaves that were signalling the environment to the young developing leaves. Experimenter name = Simon Coupe Experimenter phone = 0114 222 4115 Experimenter fax = 0114 222 0002 Experimenter institute = University of Sheffield Experimenter address = Animal and Plant Sciences Experimenter address = University of Sheffield Experimenter address = Western Bank Experimenter address = Sheffield Experimenter zip/postal_code = S10 2TN Experimenter country = UK Keywords: development_or_differentiation_design; growth_condition_design
2007-01-08 | GSE5636 | GEO
Project description:BACKGROUND:Residential proximity to major roadways, and prenatal exposures to particulate matter <2.5??m (PM2.5) and ozone (O3) are linked to poor fetal outcomes but their relationship with childhood development is unclear. OBJECTIVES:We investigated whether proximity to major roadways, or prenatal and early-life exposures to PM2.5 and O3 increase the risk of early developmental delays. STUDY DESIGN:Prospective cohort. SETTINGS:New York State excluding New York City. PARTICIPANTS:4089 singletons and 1016 twins born between 2008 and 2010. EXPOSURES:Proximity to major roadway was calculated using road network data from the NY Department of Transportation. Concentrations of PM2.5 and O3 estimated by the Environmental Protection Agency Downscaler models were spatiotemporally linked to each child's prenatal and early-life addresses incorporating residential history, and locations of maternal work and day-care. OUTCOMES:Parents reported their children's development at ages 8, 12, 18, 24, 30 and 36 months in five domains using the Ages and Stages Questionnaire. Generalized mixed models estimated the relative risk (RR) and 95% CI for failing any developmental domain per 10 units increase in PM2.5 and O3, and for those living <1000?m away from a major roadway compared to those living further. Models adjusted for potential confounders. RESULTS:Compared to those >1000?m away from a major roadway, those resided 50-100?m [RR: 2.12 (1.00-4.52)] and 100-500?m [RR: 2.07 (1.02-4.22)] away had twice the risk of failing the communication domain. Prenatal exposures to both PM2.5 and ozone during various pregnancy windows had weak but significant associations with failing any developmental domain with effects ranging from 1.6% to 2.7% for a 10??g/m3 increase in PM2.5 and 0.7%-1.7% for a 10?ppb increase in ozone. Average daily postnatal ozone exposure was positively associated with failing the overall screening by 8 months [3.3% (1.1%-5.5%)], 12 months [17.7% (10.4%-25.5%)], and 30 months [7.6%, (1.3%-14.3%)]. Findings were mixed for postnatal PM2.5 exposures. CONCLUSIONS:In this prospective cohort study, proximity to major roadway and prenatal/early-life exposures to PM2.5 and O3 were associated with developmental delays. While awaiting larger studies with personal air pollution assessment, efforts to minimize air pollution exposures during critical developmental windows may be warranted.
| S-EPMC6541527 | biostudies-literature