Dataset Information

Polymer-based mesh as supports for multi-layered 3D cell culture and assays.

ABSTRACT: Three-dimensional (3D) culture systems can mimic certain aspects of the cellular microenvironment found in vivo, but generation, analysis and imaging of current model systems for 3D cellular constructs and tissues remain challenging. This work demonstrates a 3D culture system-Cells-in-Gels-in-Mesh (CiGiM)-that uses stacked sheets of polymer-based mesh to support cells embedded in gels to form tissue-like constructs; the stacked sheets can be disassembled by peeling the sheets apart to analyze cultured cells-layer-by-layer-within the construct. The mesh sheets leave openings large enough for light to pass through with minimal scattering, and thus allowing multiple options for analysis-(i) using straightforward analysis by optical light microscopy, (ii) by high-resolution analysis with fluorescence microscopy, or (iii) with a fluorescence gel scanner. The sheets can be patterned into separate zones with paraffin film-based decals, in order to conduct multiple experiments in parallel; the paraffin-based decal films also block lateral diffusion of oxygen effectively. CiGiM simplifies the generation and analysis of 3D culture without compromising throughput, and quality of the data collected: it is especially useful in experiments that require control of oxygen levels, and isolation of adjacent wells in a multi-zone format.

SUBMITTER: Simon KA

PROVIDER: S-EPMC3856254 | biostudies-literature | 2014 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Polymer-based mesh as supports for multi-layered 3D cell culture and assays.

Simon Karen A KA Park Kyeng Min KM Mosadegh Bobak B Subramaniam Anand Bala AB Mazzeo Aaron D AD Ngo Philip M PM Whitesides George M GM

Biomaterials 20131002 1

Three-dimensional (3D) culture systems can mimic certain aspects of the cellular microenvironment found in vivo, but generation, analysis and imaging of current model systems for 3D cellular constructs and tissues remain challenging. This work demonstrates a 3D culture system-Cells-in-Gels-in-Mesh (CiGiM)-that uses stacked sheets of polymer-based mesh to support cells embedded in gels to form tissue-like constructs; the stacked sheets can be disassembled by peeling the sheets apart to analyze cu ...[more]

PMID: 24095253

Similar Datasets

Project description:Polymer nano/micro fibers have found many applications including 3D cell culture and the creation of wound dressings. The fibers can be produced by a variety of techniques that include electrospinning, the primary disadvantage of which include the requirement for a high voltage supply (which may cause issues such as polymer denaturation) and lack of portability. More recently, solution blow spinning, where a high velocity sheath gas is used instead of high voltage, has been used to generate polymer fibers. In this work, we used blow spinning to create nano/microfibers for microchip-based 3D cell culture. First, we thoroughly investigated fiber generation from a 3D printed gas sheath device using two polymers that are amenable to cell culture (polycaprolactone, PCL and polystyrene, PS) as well as the parameters that can affect PCL and PS fiber quality. Using the 3D printed sheath device, it was found that the pressure of the sheath N2 and the concentration of polymer solutions determine if fibers can be produced as well as the resulting fiber morphology. In addition, we showed how these fibers can be used for 3D cell culture by directly depositing PCL fibers in petri dishes and well plates. It is shown the fibers have good compatibility with RAW 264.7 macrophages and the PCL fiber scaffold can be as thick as 178 ± 14 μm. PCL fibers created from solution blow spinning (with the 3D printed sheath device) were then integrated with a microfluidic device for the first time to fabricate a 3D cell culture scaffold with a flow component. After culturing and stimulating macrophages on the fluidic device, it was found that the integrated 3D fibrous scaffold is a better mimic of the extracellular matrix (as opposed to a flat, 2D substrate), with enhanced nitrite accumulation (product of nitric oxide release) from macrophages stimulated with lipopolysaccharide. PS fibers were also made and integrated in a microfluidic device for 3D culture of endothelial cells, which stayed viable for at least 72 hours (48 hours under the flowing conditions). This approach will be useful for future studies involving more realistic microchip-based culture models for studying cell-to-cell communication.

Project description:Background:Three dimensional (3D) cell cultures have been an area of increasing interest and relevance across several research fields including drug discovery, developmental biology and stem cell-based therapies. However, handling 3D structures can be difficult. In particular, the replacement of liquid media and reagents in which liquid is removed using pipettes is difficult to perform as the 3D spheroids can be easily aspirated into the pipette tip. Results:We have developed the 3D-tip, a novel tool that facilitates media change and washing procedures of 3D-spheroid cultures. The 3D-tip contains a mesh with 40-?m pores allowing the aspiration of liquids including media, drugs, buffers and reagents, with the mesh acting as a barrier preventing the spheroids being aspirated into the pipette tip. After aspiration of liquids, the spheroids are gently deposited back into the culture vessel. Our results demonstrate that the 3D-tips offer superior handling of 3D-spheroid cultures in comparison to commonly used methods. We showed that the 3D-tips can easily be used on both fixed and unfixed spheroids and on cancer cell, stem cell and glial cell spheroids.In contrast with the 50/50 media exchange method, the 3D-tips allow a complete media change with minimal loss of spheroids and without damaging their morphology. Our results showed that 86.0% of spheroids remained in the chamber after changing the media using the 3D-tips. In contrast, only 45.0% of spheroids remained using the 50/50 media exchange strategy.In comparison with the centrifugation technique, the 3D-tips preserved spheroids whereas centrifugation led to the loss of spheroids and/or the alteration of the size and shape of the 3D cellular structures. We observed that 87.6 and 84.6% of the fixed and unfixed spheroids remained using the 3D-tip, respectively. In contrast, only 66.3% of the fixed spheroids and 36.4% of the unfixed spheroids were left using the centrifugation method. From a time perspective, the 3D-tips dramatically reduce the time taken for replacing media. Conclusions:This novel pipette tip is suitable for high throughput screening and automation and will revolutionise the techniques used for the production and analysis of 3D spheroids.

Dataset Information

Polymer-based mesh as supports for multi-layered 3D cell culture and assays.

Publications

Polymer-based mesh as supports for multi-layered 3D cell culture and assays.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets