Dataset Information

Component-specific, cigarette particle deposition modeling in the human respiratory tract.

ABSTRACT: Inhalation of cigarette smoke particles (CSP) leads to adverse health effects in smokers. Determination of the localized dose to the lung of the inhaled smoke aids in determining vulnerable sites, and identifying components of the smoke that may be responsible for the adverse effects; thus providing a roadmap for harm reduction of cigarette smoking. A particle deposition model specific to CSP was developed for the oral cavity and the lung by accounting for cigarette particle size growth by hygroscopicity, phase change and coagulation. In addition, since the cigarette puff enters the respiratory tract as a dense cloud, the cloud effect on particle drag and deposition was accounted for in the deposition model. Models of particle losses in the oral cavities were developed during puff drawing and subsequent mouth-hold. Cigarette particles were found to grow by hygroscopicity and coagulation, but to shrink as a result of nicotine evaporation. The particle size reached a plateau beyond which any disturbances in the environmental conditions caused the various mechanisms to balance each other out and the particle size remain stable. Predicted particle deposition considering the cloud effects was greater than when treated as a collection of non-interacting particles (i.e. no cloud effects). Accounting for cloud movement provided the necessary physical mechanism to explain the greater than expected, experimentally observed and particle deposition. The deposition model for CSP can provide the necessary input to determine the fate of inhaled CSP in the lung. The knowledge of deposition will be helpful for health assessment and identification and reduction of harmful components of CSP.

SUBMITTER: Asgharian B

PROVIDER: S-EPMC3912629 | biostudies-literature | 2014 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Component-specific, cigarette particle deposition modeling in the human respiratory tract.

Asgharian Bahman B Price Owen T OT Yurteri Caner U CU Dickens Colin C McAughey John J

Inhalation toxicology 20131220 1

Inhalation of cigarette smoke particles (CSP) leads to adverse health effects in smokers. Determination of the localized dose to the lung of the inhaled smoke aids in determining vulnerable sites, and identifying components of the smoke that may be responsible for the adverse effects; thus providing a roadmap for harm reduction of cigarette smoking. A particle deposition model specific to CSP was developed for the oral cavity and the lung by accounting for cigarette particle size growth by hygro ...[more]

PMID: 24354791

Similar Datasets

Project description:BACKGROUND:Although nanoparticles and their hazardous effects on human health are well elucidated meanwhile, inhalation and distribution of these materials in the human respiratory tract still represent partly enigmatic phenomena. Main objective of the present study was the detailed description of a mathematical method, with the help of which spatial distributions of nanoparticles deposited in the tracheobronchial tree may be visualized appropriately. METHODS:The technique is founded on a stochastic model of the bronchial network, within which inhaled particles follow individual, randomly selected trajectories. The lengths of these random paths depend on the airway-specific deposition probabilities calculated for the particles and the duration of the breath cycle. Positions of the deposited material were determined by computation of the exact lengths of individual particle trajectories and the orientation of single path segments within a Cartesian coordinate system, where the z-direction corresponds with the trachea. For a better quantification of the particle distribution and its eventual comparison with experimental data particle coordinates were fitted into a voxel grid [1 voxel = (0.467 cm)(3)]. Particle deposition is chiefly controlled by diffusive processes, whereas deposition mechanisms associated with inertia or gravity play a subordinate role. RESULTS:Deposition patterns were visualized for particles with sizes of 1, 10, and 100 nm. As clearly demonstrated by the results obtained from the modeling procedure, under normal breathing conditions 1-nm particles tend to deposit in the upper airways, whilst 10- and 100-nm particles are preferably accumulated in the airways of the central and peripheral lung. The particle dose deposited in the extrathoracic and thoracic airways within one breath cycle significantly declines with increasing particle size. CONCLUSIONS:Based on the predictions presented in this study possible consequences of nanoparticle inhalation to the health of subjects increasingly exposed to these airborne materials were discussed.

Project description:Electronic cigarette, or vaping, products (EVP) heat liquids ("e-liquids") that contain substances (licit or illicit) and deliver aerosolized particles into the lungs. Commercially available oils such as Vitamin-E-acetate (VEA), Vitamin E oil, coconut, and medium chain triglycerides (MCT) were often the constituents of e-liquids associated with an e-cigarette, or vaping, product use-associated lung injury (EVALI). The objective of this study was to evaluate the mass-based physical characteristics of the aerosolized e-liquids prepared using these oil diluents. These characteristics were particle size distributions for modeling regional respiratory deposition and puff-based total aerosol mass for estimating the number of particles delivered to the respiratory tract. Four types of e-liquids were prepared by adding terpenes to oil diluents individually: VEA, Vitamin E oil, coconut oil, and MCT. A smoking machine was used to aerosolize each e-liquid at a predetermined puff topography (volume of 55 ml for 3 s with 30-s intervals between puffs). A cascade impactor was used to collect the size-segregated aerosol for calculating the mass median aerodynamic diameter (MMAD) and geometric standard deviation (GSD). The respiratory deposition of EVP aerosols on inhalation was estimated using the Multiple-Path Particle Dosimetry model. From these results, the exhaled fraction of EVP aerosols was calculated as a surrogate of secondhand exposure potential. The MMAD of VEA (0.61 μm) was statistically different compared to MCT (0.38 μm) and coconut oil (0.47 μm) but not to Vitamin E oil (0.58 μm); p < 0.05. Wider aerosol size distribution was observed for VEA (GSD 2.35) and MCT (GSD 2.08) compared with coconut oil (GSD 1.53) and Vitamin E oil (GSD 1.55). Irrespective of the statistical differences between MMADs, dosimetry modeling resulted in the similar regional and lobular deposition of particles for all e-liquids in the respiratory tract. The highest (~0.08 or more) fractional deposition was predicted in the pulmonary region, which is consistent as the site of injury among EVALI cases. Secondhand exposure calculations indicated that a substantial amount of EVP aerosols could be exhaled, which has potential implications for bystanders. The number of EVALI cases has declined with the removal of VEA; however, further research is required to investigate the commonly available commercial ingredients used in e-liquid preparations.

Dataset Information

Component-specific, cigarette particle deposition modeling in the human respiratory tract.

Publications

Component-specific, cigarette particle deposition modeling in the human respiratory tract.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets