Dataset Information

Isotherm modelling, kinetic study and optimization of batch parameters using response surface methodology for effective removal of Cr(VI) using fungal biomass.

ABSTRACT: Biosorption is a promising alternative method to replace the existing conventional technique for Cr(VI) removal from the industrial effluent. In the present experimental design, the removal of Cr(VI) from the aqueous solution was studied by Aspergillus niger MSR4 under different environmental conditions in the batch systems. The optimum conditions of biosorption were determined by investigating pH (2.0) and temperature (27°C). The effects of parameters such as biomass dosage (g/L), initial Cr(VI) concentration (mg/L) and contact time (min) on Cr(VI) biosorption were analyzed using a three parameter Box-Behnken design (BBD). The experimental data well fitted to the Langmuir isotherm, in comparison to the other isotherm models tested. The results of the D-R isotherm model suggested that a chemical ion-exchange mechanism was involved in the biosorption process. The biosorption process followed the pseudo-second-order kinetic model, which indicates that the rate limiting step is chemisorption process. Fourier transform infrared (FT-IR) spectroscopic studies revealed the possible involvement of functional groups, such as hydroxyl, carboxyl, amino and carbonyl group in the biosorption process. The thermodynamic parameters for Cr(VI) biosorption were also calculated, and the negative ?Gº values indicated the spontaneous nature of biosorption process.

SUBMITTER: S MS

PROVIDER: S-EPMC4364747 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Isotherm modelling, kinetic study and optimization of batch parameters using response surface methodology for effective removal of Cr(VI) using fungal biomass.

S Melvin Samuel MS M Evy Alice Abigail EA Chidambaram Ramalingam R

PloS one 20150318 3

Biosorption is a promising alternative method to replace the existing conventional technique for Cr(VI) removal from the industrial effluent. In the present experimental design, the removal of Cr(VI) from the aqueous solution was studied by Aspergillus niger MSR4 under different environmental conditions in the batch systems. The optimum conditions of biosorption were determined by investigating pH (2.0) and temperature (27°C). The effects of parameters such as biomass dosage (g/L), initial Cr(VI ...[more]

PMID: 25786227

Similar Datasets

Project description:Pine needle litter in Himalayan forests leads to forest fires, ground water recharge inhibition, soil acidification and contamination, and stops the growth of grass and plants. This study provides a possible solution for pine needle litter problem by converting it to biochar. Pine needle litter lying on the ground for approximately a month was collected from the Himalayan region. The pine needle litter biochars were generated using slow pyrolysis (residence time, 30 min; heating rate, 10 °C/min) at 350, 450, 550, 650, and 750 °C. Finally, pine needle litter biochar prepared at 550 °C (PNBC550) was selected for sorptive removal of aqueous lead both in batch and column studies. The PNBC550 was characterized for proximate and elemental compositions, crystallinity, surface area, morphology, and functional groups. A BET surface area of 230.9 m2/g was obtained for PNBC550. Batch sorption studies were carried out to study (1) the adsorption versus pH studies (at pH 2 to 7), (2) isotherms (at 10, 25, and 35 °C) to evaluate the temperature effect on the sorption efficiency, and (3) kinetics to reveal the effect of time, adsorbent dose, and initial concentration on the reaction rate. Increasing pyrolysis temperature raised lead sorption up to 550 °C. Lead adsorption increased considerably as pH rose from 2 to a maximum adsorption around pH 5 and above. The sorption data were fitted using different isotherm models and kinetic equations. The Langmuir adsorption capacity increased from 22.93 mg/g at 10 °C to 40.43 mg/g at 35 °C, showing that adsorption was endothermic. Fixed-bed studies were conducted at room temperature with an initial lead concentration of 7.85 mg/L and 4.0 g of PNBC550 at initial pH 5.0 and a flow rate of 3 mL/min. Desorption studies conducted under the same experimental conditions found about 90-93% lead recovery. Development of high-efficiency biochars for lead remediation provides a sustainable solution for the Himalayan pine needle litter problem. The biochars also possess the possible potential for aqueous removal of other metal cations.

Dataset Information

Isotherm modelling, kinetic study and optimization of batch parameters using response surface methodology for effective removal of Cr(VI) using fungal biomass.

Publications

Isotherm modelling, kinetic study and optimization of batch parameters using response surface methodology for effective removal of Cr(VI) using fungal biomass.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets