Browse
Submit Data
Databases
API
Help

Dataset Information

6 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Graphene-Nanodiamond Heterostructures and their application to High Current Devices.

ABSTRACT: Graphene on hydrogen terminated monolayer nanodiamond heterostructures provides a new way to improve carrier transport characteristics of the graphene, offering up to 60% improvement when compared with similar graphene on SiO2/Si substrates. These heterostructures offers excellent current-carrying abilities whilst offering the prospect of a fast, low cost and easy methodology for device applications. The use of ND monolayers is also a compatible technology for the support of large area graphene films. The nature of the C-H bonds between graphene and H-terminated NDs strongly influences the electronic character of the heterostructure, creating effective charge redistribution within the system. Field effect transistors (FETs) have been fabricated based on this novel herterostructure to demonstrate device characteristics and the potential of this approach.

SUBMITTER: Zhao F

PROVIDER: S-EPMC4563554 | biostudies-literature | 2015 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Graphene-Nanodiamond Heterostructures and their application to High Current Devices.

Zhao Fang F Vrajitoarea Andrei A Jiang Qi Q Han Xiaoyu X Chaudhary Aysha A Welch Joseph O JO Jackman Richard B RB

Scientific reports 20150909

Graphene on hydrogen terminated monolayer nanodiamond heterostructures provides a new way to improve carrier transport characteristics of the graphene, offering up to 60% improvement when compared with similar graphene on SiO2/Si substrates. These heterostructures offers excellent current-carrying abilities whilst offering the prospect of a fast, low cost and easy methodology for device applications. The use of ND monolayers is also a compatible technology for the support of large area graphene ...[more]

PMID: 26350107

Similar Datasets

Scalable High-Mobility Graphene/hBN Heterostructures.

Project description:Graphene-hexagonal boron nitride (hBN) scalable heterostructures are pivotal for the development of graphene-based high-tech applications. In this work, we demonstrate the realization of high-quality graphene-hBN heterostructures entirely obtained with scalable approaches. hBN continuous films were grown via ion beam-assisted physical vapor deposition directly on commercially available SiO2/Si and used as receiving substrates for graphene single-crystal matrixes grown by chemical vapor deposition on copper. The structural, chemical, and electronic properties of the heterostructure were investigated by atomic force microscopy, Raman spectroscopy, and electrical transport measurements. We demonstrate graphene carrier mobilities exceeding 10,000 cm2/Vs in ambient conditions, 30% higher than those directly measured on SiO2/Si. We prove the scalability of our approach by measuring more than 100 transfer length method devices over a centimeter scale, which present an average carrier mobility of 7500 ± 850 cm2/Vs. The reported high-quality all-scalable heterostructures are of relevance for the development of graphene-based high-performing electronic and optoelectronic applications.

| S-EPMC10416142 | biostudies-literature

High-Performance Flexible Energy Storage Devices Based on Graphene Decorated with Flower-Shaped MoS<sub>2</sub> Heterostructures.

Project description:MoS2, owing to its advantages of having a sheet-like structure, high electrical conductivity, and benign environmental nature, has emerged as a candidate of choice for electrodes of next-generation supercapacitors. Its widespread use is offset, however, by its low energy density and poor durability. In this study, to overcome these limitations, flower-shaped MoS2/graphene heterostructures have been deployed as electrode materials on flexible substrates. Three-electrode measurements yielded an exceptional capacitance of 853 F g-1 at 1.0 A g-1, while device measurements on an asymmetric supercapacitor yielded 208 F g-1 at 0.5 A g-1 and long-term cyclic durability. Nearly 86.5% of the electrochemical capacitance was retained after 10,000 cycles at 0.5 A g-1. Moreover, a remarkable energy density of 65 Wh kg-1 at a power density of 0.33 kW kg-1 was obtained. Our MoS2/Gr heterostructure composites have great potential for the development of advanced energy storage devices.

| S-EPMC9967960 | biostudies-literature

Borophene-graphene heterostructures.

Project description:Integration of dissimilar two-dimensional (2D) materials is essential for nanoelectronic applications. Compared to vertical stacking, covalent lateral stitching requires bottom-up synthesis, resulting in rare realizations of 2D lateral heterostructures. Because of its polymorphism and diverse bonding geometries, borophene is a promising candidate for 2D heterostructures, although suitable synthesis conditions have not yet been demonstrated. Here, we report lateral and vertical integration of borophene with graphene. Topographic and spatially resolved spectroscopic measurements reveal nearly atomically sharp lateral interfaces despite imperfect crystallographic lattice and symmetry matching. In addition, boron intercalation under graphene results in rotationally commensurate vertical heterostructures. The rich bonding configurations of boron suggest that borophene can be integrated into a diverse range of 2D heterostructures.

| S-EPMC6788864 | biostudies-literature

Quantitatively estimating defects in graphene devices using discharge current analysis method.

Project description:Defects of graphene are the most important concern for the successful applications of graphene since they affect device performance significantly. However, once the graphene is integrated in the device structures, the quality of graphene and surrounding environment could only be assessed using indirect information such as hysteresis, mobility and drive current. Here we develop a discharge current analysis method to measure the quality of graphene integrated in a field effect transistor structure by analyzing the discharge current and examine its validity using various device structures. The density of charging sites affecting the performance of graphene field effect transistor obtained using the discharge current analysis method was on the order of 10(14)/cm(2), which closely correlates with the intensity ratio of the D to G bands in Raman spectroscopy. The graphene FETs fabricated on poly(ethylene naphthalate) (PEN) are found to have a lower density of charging sites than those on SiO2/Si substrate, mainly due to reduced interfacial interaction between the graphene and the PEN. This method can be an indispensable means to improve the stability of devices using a graphene as it provides an accurate and quantitative way to define the quality of graphene after the device fabrication.

| S-EPMC4013935 | biostudies-literature

High broad-band photoresponsivity of mechanically formed InSe-graphene van der Waals heterostructures.

Project description:High broad-band photoresponsivity of mechanically formed InSe-graphene van der Waals heterostructures is achieved by exploiting the broad-band transparency of graphene, the direct bandgap of InSe, and the favorable band line up of InSe with graphene. The photoresponsivity exceeds that for other van der Waals heterostructures and the spectral response extends from the near-infrared to the visible spectrum.

| S-EPMC4768130 | biostudies-literature

Three-Dimensional Porous Copper-Graphene Heterostructures with Durability and High Heat Dissipation Performance.

Project description:Porous materials have historically been of interest for a wide range of applications in thermal management, for example, in heat exchangers and thermal barriers. Rapid progress in electronic and optoelectronic technology necessitates more efficient spreading and dissipation of the heat generated in these devices, calling for the development of new thermal management materials. Here, we report an effective technique for the synthesis of porous Cu-graphene heterostructures with pores of about 30 μm and a porosity of 35%. Graphene layers were grown on the surfaces of porous Cu, which was formed via the coalescence of molten Cu microparticles. The surface passivation with graphene layers resulted in a thermal conductivity higher than that of porous Cu, especially at high temperatures (approximately 40% at 1173 K). The improved heat dissipation properties of the porous structures were demonstrated by analysis of the thermal resistance and temperature distribution of LED chips mounted on the structures. The effective combination of the structural and material properties of porous Cu-graphene heterostructures provides a new material for effective thermal management of high-power electronic and optoelectronic devices.

| S-EPMC4522598 | biostudies-literature

Photo-thermionic effect in vertical graphene heterostructures.

Project description:Finding alternative optoelectronic mechanisms that overcome the limitations of conventional semiconductor devices is paramount for detecting and harvesting low-energy photons. A highly promising approach is to drive a current from the thermal energy added to the free-electron bath as a result of light absorption. Successful implementation of this strategy requires a broadband absorber where carriers interact among themselves more strongly than with phonons, as well as energy-selective contacts to extract the excess electronic heat. Here we show that graphene-WSe2-graphene heterostructure devices offer this possibility through the photo-thermionic effect: the absorbed photon energy in graphene is efficiently transferred to the electron bath leading to a thermalized hot carrier distribution. Carriers with energy higher than the Schottky barrier between graphene and WSe2 can be emitted over the barrier, thus creating photocurrent. We experimentally demonstrate that the photo-thermionic effect enables detection of sub-bandgap photons, while being size-scalable, electrically tunable, broadband and ultrafast.

| S-EPMC4947168 | biostudies-literature

Fabrication of High Yield Photoluminescent Quantized Graphene Nanodiscs for Supercapacitor Devices.

Project description:In this work, we produced high yield quantized nitrogen-doped graphene nanodiscs from waste tires via a one-step process under high pressure and temperature using a homemade stainless steel reactor without using any chemical additives. Reaction temperature played a vital role in the preparation process. By increasing the temperature to a level between 600 and 1100 °C, the carbon atoms rearranged themselves to build a mixed graphene structure of nanodiscs and quantum dots. The obtained graphene exhibits excellent capacitance and long life cycle stability as an electrode in supercapacitor devices. The specific capacitance rose to 161.24 F/g with a high power density of 733.3 W/kg, and the energy density reached 27.1 Wh/kg. The finding of this work is not only to provide a solution to get rid of hazardous materials but also to give awareness of turning these hazardous materials into a cost-effective and economical nanomaterial; in another, this approach sheds light on the promising power uses of waste.

| S-EPMC8444208 | biostudies-literature

High-pressure, high-temperature molecular doping of nanodiamond.

Project description:The development of color centers in diamond as the basis for emerging quantum technologies has been limited by the need for ion implantation to create the appropriate defects. We present a versatile method to dope diamond without ion implantation by synthesis of a doped amorphous carbon precursor and transformation at high temperatures and high pressures. To explore this bottom-up method for color center generation, we rationally create silicon vacancy defects in nanodiamond and investigate them for optical pressure metrology. In addition, we show that this process can generate noble gas defects within diamond from the typically inactive argon pressure medium, which may explain the hysteresis effects observed in other high-pressure experiments and the presence of noble gases in some meteoritic nanodiamonds. Our results illustrate a general method to produce color centers in diamond and may enable the controlled generation of designer defects.

| S-EPMC6499550 | biostudies-literature

Synthesis of Large Area Graphene for High Performance in Flexible Optoelectronic Devices.

Project description:This work demonstrates an attractive low-cost route to obtain large area and high-quality graphene films by using the ultra-smooth copper foils which are typically used as the negative electrodes in lithium-ion batteries. We first compared the electronic transport properties of our new graphene film with the one synthesized by using commonly used standard copper foils in chemical vapor deposition (CVD). We observed a stark improvement in the electrical performance of the transistors realized on our graphene films. To study the optical properties on large area, we transferred CVD based graphene to transparent flexible substrates using hot lamination method and performed large area optical scanning. We demonstrate the promise of our high quality graphene films for large areas with ~400 cm(2) flexible optical modulators. We obtained a profound light modulation over a broad spectrum by using the fabricated large area transparent graphene supercapacitors and we compared the performance of our devices with the one based on graphene from standard copper. We propose that the copper foils used in the lithium-ion batteries could be used to obtain high-quality graphene at much lower-cost, with the improved performance of electrical transport and optical properties in the devices made from them.

| S-EPMC4649757 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data