Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data demonstrating the effects of build orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel.

ABSTRACT: Axial fully-reversed strain-controlled ([Formula: see text]) fatigue experiments were performed to obtain data demonstrating the effects of building orientation (i.e. vertical versus horizontal) and heat treatment on the fatigue behavior of 17-4 PH stainless steel (SS) fabricated via Selective Laser Melting (SLM) (Yadollahi et al., submitted for publication [1]). This data article provides detailed experimental data including cyclic stress-strain responses, variations of peak stresses during cyclic deformation, and fractography of post-mortem specimens for SLM 17-4 PH SS.

SUBMITTER: Yadollahi A

PROVIDER: S-EPMC4761700 | biostudies-literature | 2016 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data demonstrating the effects of build orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel.

Yadollahi Aref A Simsiriwong Jutima J Thompson Scott M SM Shamsaei Nima N

Data in brief 20160210

Axial fully-reversed strain-controlled ([Formula: see text]) fatigue experiments were performed to obtain data demonstrating the effects of building orientation (i.e. vertical versus horizontal) and heat treatment on the fatigue behavior of 17-4 PH stainless steel (SS) fabricated via Selective Laser Melting (SLM) (Yadollahi et al., submitted for publication [1]). This data article provides detailed experimental data including cyclic stress-strain responses, variations of peak stresses during cyc ...[more]

PMID: 26955653

Similar Datasets

Fatigue data for laser beam powder bed fused 17-4 PH stainless steel specimens in different heat treatment and surface roughness conditions.

Project description:This article presents the data demonstrating the synergistic effect of surface roughness and heat treatment on the fatigue behavior of 17-4 PH stainless steel (SS) fabricated via laser beam powder bed fusion (LB-PBF) [1]. Two sets of specimens, in as-built and machined surface conditions, were heat treated using five different recommended procedures for 17-4 PH SS by ASTM A693. Axial fully-reversed fatigue tests (R = -1) were conducted on heat treated as-built and machined specimens. The stable hysteresis stress-strain data, as well as the maximum and minimum stress and strain values for the cycle in a log10 increment are included for all conducted fatigue experiments. In addition, fractography images are provided for selected set of specimens.

| S-EPMC6646923 | biostudies-literature

Residual stress measurements via neutron diffraction of additive manufactured stainless steel 17-4 PH.

Project description:Neutron diffraction was employed to measure internal residual stresses at various locations along stainless steel (SS) 17-4 PH specimens additively manufactured via laser-powder bed fusion (L-PBF). Of these specimens, two were rods (diameter=8 mm, length=80 mm) built vertically upward and one a parallelepiped (8×80×9 mm3) built with its longest edge parallel to ground. One rod and the parallelepiped were left in their as-built condition, while the other rod was heat treated. Data presented provide insight into the microstructural characteristics of typical L-PBF SS 17-4 PH specimens and their dependence on build orientation and post-processing procedures such as heat treatment. Data have been deposited in the Data in Brief Dataverse repository (doi:10.7910/DVN/T41S3V).

| S-EPMC5480826 | biostudies-literature

Nanosecond laser coloration on stainless steel surface.

Project description:In this work, we present laser coloration on 304 stainless steel using nanosecond laser. Surface modifications are tuned by adjusting laser parameters of scanning speed, repetition rate, and pulse width. A comprehensive study of the physical mechanism leading to the appearance is presented. Microscopic patterns are measured and employed as input to simulate light-matter interferences, while chemical states and crystal structures of composites to figure out intrinsic colors. Quantitative analysis clarifies the final colors and RGB values are the combinations of structural colors and intrinsic colors from the oxidized pigments, with the latter dominating. Therefore, the engineering and scientific insights of nanosecond laser coloration highlight large-scale utilization of the present route for colorful and resistant steels.

| S-EPMC5541041 | biostudies-literature

Comparative Quality Control of Titanium Alloy Ti-6Al-4V, 17-4 PH Stainless Steel, and Aluminum Alloy 4047 Either Manufactured or Repaired by Laser Engineered Net Shaping (LENS).

Project description:Additive manufacturing attracts much interest for manufacturing and repair of structural parts for the aerospace industry. This paper presents comparative characterization of aircraft items made of Al 4047 alloy, Ti-6Al-4V alloy, and 17-4 precipitation hardened (PH) (AISI 630) stainless steel, either manufactured or repaired by laser engineered net shaping (LENS). Chemical analysis, density, and surface roughness measurements, X-ray micro-computed tomography (μ-CT) analysis, metallography, and micro-hardness testing were conducted. In all three materials, microstructures typical of rapid solidification were observed, along with high density, chemical composition, and hardness comparable to those of the counterpart wrought alloys (even in hard condition). High standard deviation in hardness values, anisotropic geometrical distortion, and overbuild at top edges were observed. The detected defects included partially melted and unmelted powder particles, porosity, and interlayer lack of fusion, in particular at the interface between the substrate plate and the build. There was a fairly good match between the density values measured by μ-CT and those measured by the Archimedes method; there was also good correlation between the type of defects detected by both techniques. Surface roughness, density of partially melted powder particles, and the content of bulk defects were significantly higher in Al 4047 than in 17-4 PH stainless steel and Ti-6Al-4V alloy. Optical gaging can be used reliably for surface roughness measurements. The implications of these findings are discussed.

| S-EPMC7560294 | biostudies-literature

Effect of heat-treatment on the pH sensitivity of stainless-steel electrodes as pH sensors.

Project description:Effect of heat-treatment on the pH sensitivity of uncoated stainless-steel electrodes was investigated to comprehend the pH sensitivity of metal-oxide coated stainless-steel electrodes as novel pH sensors. The pH sensitivity of stainless-steel electrodes as-received and heat-treated at 500 °C, 600 °C and 700 °C for 24 h were 91 %, 94 %, 102 % and 91 %, respectively. The pH sensitivity tended to increase with increasing heat-treatment time at a given temperature. Thus, the most suitable heat-treatment condition for the stainless-steel electrodes was 600 °C for 24 h. The austenite phase (fcc) was the main phase on the surface of the heat-treated stainless-steel electrodes. Unexpectedly, the change in the martensite phase (bcc) as the second phase with heat-treatment temperature was similar to the pH sensitivity, with the martensite phase affecting the pH sensitivity. Therefore, it appeared that the pH sensitivity of the metal-oxide coated stainless-steel electrodes was affected by the underlying stainless-steel as well as the outer metal-oxide film coating. A prototype stainless-steel tube electrode was used as a working electrode for demonstrating the depth profiling of pH. The stainless-steel tube electrode showed good performance for measuring pH depth profiles compared to commercially available glass electrodes.

| S-EPMC6441752 | biostudies-literature

Prediction of 316 stainless steel low-cycle fatigue life based on machine learning

Project description:The low-cycle fatigue life of 316 stainless steel is a significant basis for safety assessment. Usually, many factors affect the low-cycle fatigue life of stainless steel, and the relationship between the influencing factors and fatigue life is complicated and nonlinear. Therefore, it is hard to predict fatigue life using the traditional empirical formula. Based on this, a machine learning algorithm is proposed. In this paper, based on the large amount of existing experimental data, machine learning methods are used to predict the low circumferential fatigue life of 316 stainless steel. The results show that the prediction accuracy of nu-SVR and ELM models is high and can meet engineering needs.

| S-EPMC10130168 | biostudies-literature

Mouse Lung Response to Stainless Steel and Mild Steel Welding Fume

Project description:A/J mice are genetically predisposed to spontaneous and/or chemically-induced lung tumors while C57BL/6J (B6) mice are resistant. This genetic disparity provides a unique scenario to identify molecular mechanisms associated with the lung response to welding fume at the transcriptome level.

2010-04-30 | GSE20174 | GEO

Characterization of a Laser Surface-Treated Martensitic Stainless Steel.

Project description:Laser surface treatment was carried out on AISI 416 machinable martensitic stainless steel containing 0.225 wt.% sulfur. Nd:YAG laser with a 2.2-KW continuous wave was used. The aim was to compare the physical and chemical properties achieved by this type of selective surface treatment with those achieved by the conventional treatment. Laser power of different values (700 and 1000 W) with four corresponding different laser scanning speeds (0.5, 1, 2, and 3 m•min-1) was adopted to reach the optimum conditions for impact toughness, wear, and corrosion resistance for laser heat treated (LHT) samples. The 0 °C impact energy of LHT samples indicated higher values compared to the conventionally heat treated (CHT) samples. This was accompanied by the formation of a hard surface layer and a soft interior base metal. Microhardness was studied to determine the variation of hardness values with respect to the depth under the treated surface. The wear resistance at the surface was enhanced considerably. Microstructure examination was characterized using optical and scanning electron microscopes. The corrosion behavior of the LHT samples was also studied and its correlation with the microstructures was determined. The corrosion data was obtained in 3.5% NaCl solution at room temperature by means of a potentiodynamic polarization technique.

| S-EPMC5553412 | biostudies-other

3D-printed metals: Process parameters effects on mechanical properties of 17-4 P H stainless steel.

Project description:Additive Manufacturing (AM) has spread significantly in recent years, with relevant applications in many fields of research and engineering. Thanks to its distinctive production methods, AM enables the creation of parts with complex shapes that cannot be fabricated easily by employing traditional subtractive processes. 3D printing, which involves overlapping material layer by layer until the designed part is completed, shows several advantages in terms of limiting material waste, reducing production phases and postprocessing/heat treatments needs, leading to an additional benefit in terms of environmental sustainability. However, there are still limited available data on the influence of the 3D printing process on the mechanical properties of the materials that are commonly used and additional investigations are strongly demanded. So, the purpose of the present paper is to provide a useful contribution in the field of metal additive manufacturing, reporting the results of an experimental campaign carried out on 17-4 P H stainless steel, produced using selective laser melting technology. The effects of different printing orientations and scanning times on the tensile behaviour, impact strength and microhardness features of the 3D-printed products are investigated. Furthermore, the influence of an annealing heat treatment on the material mechanical performance is evaluated.

| S-EPMC10362090 | biostudies-literature

Microstructural Study of 17-4PH Stainless Steel after Plasma-Transferred Arc Welding.

Project description:The improvement of the surface qualities and surface hardening of precipitation hardened martensitic stainless steel 17-4PH was achieved by the plasma-transferred arc welding (PTAW) process deposited with Co-based alloy. The microstructure of the heat affected zone (HAZ) and base metal were characterized by optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that there are obvious microstructural differences between the base metal and HAZ. For example, base material is transformed from lath martensite to austenite due to the heateffect of the welding process. On the other hand, the precipitate in the matrix (bar-like shape Cr₇C₃ phase with a width of about one hundred nanometres and a length of hundreds of nanometres) grows to a rectangular appearance with a width of about two hundred nanometres and a length of about one micron. Stacking fault could also be observed in the Cr₇C₃ after PTAW. The above means that welding can obviously improve the surface qualities.

| S-EPMC5455284 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data