Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Switching Power Universality in Unipolar Resistive Switching Memories.

ABSTRACT: We investigate the resistive switching power from unipolar resistive switching current-voltage characteristics in various binary metal oxide films sandwiched by different metal electrodes, and find a universal feature (the so-called universality) in the switching power among these devices. To experimentally derive the switching power universality, systematic measurements of the switching voltage and current are performed, and neither of these correlate with one another. As the switching resistance (R) increases, the switching power (P) decreases following a power law P???R(-?), regardless of the device configurations. The observed switching power universality is indicative of the existence of a commonly applicable switching mechanism. The origin of the power universality is discussed based on a metallic filament model and thermo-chemical reaction.

SUBMITTER: Kim J

PROVIDER: S-EPMC4817028 | biostudies-literature | 2016 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Switching Power Universality in Unipolar Resistive Switching Memories.

Kim Jongmin J Jung Kyooho K Kim Yongmin Y Jo Yongcheol Y Cho Sangeun S Woo Hyeonseok H Lee Seongwoo S Inamdar A I AI Hong Jinpyo J Lee Jeon-Kook JK Kim Hyungsang H Im Hyunsik H

Scientific reports 20160401

We investigate the resistive switching power from unipolar resistive switching current-voltage characteristics in various binary metal oxide films sandwiched by different metal electrodes, and find a universal feature (the so-called universality) in the switching power among these devices. To experimentally derive the switching power universality, systematic measurements of the switching voltage and current are performed, and neither of these correlate with one another. As the switching resistan ...[more]

PMID: 27033695

Similar Datasets

Scaling effect on unipolar and bipolar resistive switching of metal oxides.

Project description:Electrically driven resistance change in metal oxides opens up an interdisciplinary research field for next-generation non-volatile memory. Resistive switching exhibits an electrical polarity dependent "bipolar-switching" and a polarity independent "unipolar-switching", however tailoring the electrical polarity has been a challenging issue. Here we demonstrate a scaling effect on the emergence of the electrical polarity by examining the resistive switching behaviors of Pt/oxide/Pt junctions over 8 orders of magnitudes in the areas. We show that the emergence of two electrical polarities can be categorised as a diagram of an electric field and a cell area. This trend is qualitatively common for various oxides including NiOx, CoOx, and TiO(2-x). We reveal the intrinsic difference between unipolar switching and bipolar switching on the area dependence, which causes a diversity of an electrical polarity for various resistive switching devices with different geometries. This will provide a foundation for tailoring resistive switching behaviors of metal oxides.

| S-EPMC3625919 | biostudies-literature

Toward ultimate nonvolatile resistive memories: The mechanism behind ovonic threshold switching revealed.

Project description:Fifty years after its discovery, the ovonic threshold switching (OTS) phenomenon, a unique nonlinear conductivity behavior observed in some chalcogenide glasses, has been recently the source of a real technological breakthrough in the field of data storage memories. This breakthrough was achieved because of the successful 3D integration of so-called OTS selector devices with innovative phase-change memories, both based on chalcogenide materials. This paves the way for storage class memories as well as neuromorphic circuits. We elucidate the mechanism behind OTS switching by new state-of-the-art materials using electrical, optical, and x-ray absorption experiments, as well as ab initio molecular dynamics simulations. The model explaining the switching mechanism occurring in amorphous OTS materials under electric field involves the metastable formation of newly introduced metavalent bonds. This model opens the way for design of improved OTS materials and for future types of applications such as brain-inspired computing.

| S-EPMC7048425 | biostudies-literature

Enhanced Unipolar Resistive Switching Characteristics of Hf0.5Zr0.5O2 Thin Films with High ON/OFF Ratio.

Project description:A metal-insulator-metal structure resistive switching device based on H0.5Z0.5O₂ (HZO) thin film deposited by pulse laser deposition (PLD) has been investigated for resistive random access memory (RRAM) applications. The devices demonstrated bistable and reproducible unipolar resistive switching (RS) behaviors with an extremely high OFF/ON ratio over 5400. The retention property had no degradation at 6 × 10⁴ s. The current-voltage characteristics of the HZO samples showed a Schottky emission conduction in the high voltage region (Vreset < V < Vset), while at the low voltage region (V < Vreset), the ohmic contact and space charge limited conduction (SCLC) are suggested to be responsible for the low and high resistance states, respectively. Combined with the conductance mechanism, the RS behaviors are attributed to joule heating and redox reactions in the HZO thin film induced by the external electron injection.

| S-EPMC5503322 | biostudies-other

Chemically-inactive interfaces in thin film Ag/AgI systems for resistive switching memories.

Project description:AgI nanoionics-based resistive switching memories were studied in respect to chemical stability of the Ag/AgI interface using x-ray absorption spectroscopy. The apparent dissolution of Ag films of thickness below some tens of nanometers and the loss of electrode/electrolyte contact was critically addressed. The results evidently show that there are no chemical interactions at the interface despite the high ionic mobility of Ag ions. Simulation results further show that Ag metal clusters can form in the AgI layer with intermediate-range order at least up to next-next nearest neighbors, suggesting that Ag can permeate into the AgI only in an aggregated form of metal crystallite.

| S-EPMC3558693 | biostudies-other

Low-Power Resistive Switching Characteristic in HfO<sub>2</sub>/TiO<sub>x</sub> Bi-Layer Resistive Random-Access Memory.

Project description:Resistive random-access memory devices with atomic layer deposition HfO2 and radio frequency sputtering TiOx as resistive switching layers were fabricated successfully. Low-power characteristic with 1.52 μW set power (1 μA@1.52 V) and 1.12 μW reset power (1 μA@1.12 V) was obtained in the HfO2/TiOx resistive random-access memory (RRAM) devices by controlling the oxygen content of the TiOx layer. Besides, the influence of oxygen content during the TiOx sputtering process on the resistive switching properties would be discussed in detail. The investigations indicated that "soft breakdown" occurred easily during the electrical forming/set process in the HfO2/TiOx RRAM devices with high oxygen content of the TiOx layer, resulting in high resistive switching power. Low-power characteristic was obtained in HfO2/TiOx RRAM devices with appropriately high oxygen vacancy density of TiOx layer, suggesting that the appropriate oxygen vacancy density in the TiOx layer could avoid "soft breakdown" through the whole dielectric layers during forming/set process, thus limiting the current flowing through the RRAM device and decreasing operating power consumption.

| S-EPMC6509306 | biostudies-literature

Resistive switching behavior of reduced graphene oxide memory cells for low power nonvolatile device application.

Project description:Graphene Oxide (GO) based low cost flexible electronics and memory cell have recently attracted more attention for the fabrication of emerging electronic devices. As a suitable candidate for resistive random access memory technology, reduced graphene oxide (RGO) can be widely used for non-volatile switching memory applications because of its large surface area, excellent scalability, retention, and endurance properties. We demonstrated that the fabricated metal/RGO/metal memory device exhibited excellent switching characteristics, with on/off ratio of two orders of magnitude and operated threshold switching voltage of less than 1?V. The studies on different cell diameter, thickness, scan voltages and period of time corroborate the reliability of the device as resistive random access memory. The microscopic origin of switching operation is governed by the establishment of conducting filaments due to the interface amorphous layer rupturing and the movement of oxygen in the GO layer. This interesting experimental finding indicates that device made up of thermally reduced GO shows more reliability for its use in next generation electronics devices.

| S-EPMC4886213 | biostudies-literature

Filament Geometry Induced Bipolar, Complementary, and Unipolar Resistive Switching under the Same Set Current Compliance in Pt/SiOx/TiN.

Project description:The decidedly unusual co-occurrence of bipolar, complementary, and unipolar resistive switching (BRS, CRS, and URS, respectively) behavior under the same high set current compliance (set-CC) is discussed on the basis of filament geometry in a Pt/SiOx/TiN stack. Set-CC-dependent scaling behavior with relations Ireset ~ R0(-α) and Vreset ~ R0(-β) differentiates BRS under low set-CC from other switching behaviors under high set-CC due to a low α and β involving a narrow filamentary path. Because such co-occurrence is observed only in the case of a high α and β involving a wide filamentary path, such a path can be classified into three different geometries according to switching behavior in detail. From the cyclic switching and a model simulation, we conclude that the reset of BRS originates from a narrower filamentary path near the top electrode than that of CRS due to the randomness of field-driven migration even under the same set-CC. Also, we conclude that URS originates from much narrower inversed conical filamentary path. Therefore, filament-geometry-dependent electric field and/or thermal effects can precisely describe the entire switching behaviors in this experiment.

| S-EPMC4614918 | biostudies-other

Self-Compliant Bipolar Resistive Switching in SiN-Based Resistive Switching Memory.

Project description:Here, we present evidence of self-compliant and self-rectifying bipolar resistive switching behavior in Ni/SiNx/n⁺ Si and Ni/SiNx/n++ Si resistive-switching random access memory devices. The Ni/SiNx/n++ Si device's Si bottom electrode had a higher dopant concentration (As ion > 1019 cm-3) than the Ni/SiNx/n⁺ Si device; both unipolar and bipolar resistive switching behaviors were observed for the higher dopant concentration device owing to a large current overshoot. Conversely, for the device with the lower dopant concentration (As ion < 1018 cm-3), self-rectification and self-compliance were achieved owing to the series resistance of the Si bottom electrode.

| S-EPMC5459000 | biostudies-other

Interfacial chemical bonding-mediated ionic resistive switching.

Project description:In this paper, we present a unique resistive switching (RS) mechanism study of Pt/TiO2/Pt cell, one of the most widely studied RS system, by focusing on the role of interfacial bonding at the active TiO2-Pt interface, as opposed to a physico-chemical change within the RS film. This study was enabled by the use of a non-conventional scanning probe-based setup. The nanoscale cell is formed by bringing a Pt/TiO2-coated atomic force microscope tip into contact with a flat substrate coated with Pt. The study reveals that electrical resistance and interfacial bonding status are highly coupled together. An oxygen-mediated chemical bonding at the active interface between TiO2 and Pt is a necessary condition for a non-polar low-resistance state, and a reset switching process disconnects the chemical bonding. Bipolar switching mode did not involve the chemical bonding. The nature of chemical bonding at the TiO2-metal interface is further studied by density functional theory calculations.

| S-EPMC5430901 | biostudies-literature

Time and rate dependent synaptic learning in neuro-mimicking resistive memories.

Project description:Memristors have demonstrated immense potential as building blocks in future adaptive neuromorphic architectures. Recently, there has been focus on emulating specific synaptic functions of the mammalian nervous system by either tailoring the functional oxides or engineering the external programming hardware. However, high device-to-device variability in memristors induced by the electroforming process and complicated programming hardware are among the key challenges that hinder achieving biomimetic neuromorphic networks. Here, a simple hybrid complementary metal oxide semiconductor (CMOS)-memristor approach is reported to implement different synaptic learning rules by utilizing a CMOS-compatible memristor based on oxygen-deficient SrTiO3-x (STOx). The potential of such hybrid CMOS-memristor approach is demonstrated by successfully imitating time-dependent (pair and triplet spike-time-dependent-plasticity) and rate-dependent (Bienenstosk-Cooper-Munro) synaptic learning rules. Experimental results are benchmarked against in-vitro measurements from hippocampal and visual cortices with good agreement. The scalability of synaptic devices and their programming through a CMOS drive circuitry elaborates the potential of such an approach in realizing adaptive neuromorphic computation and networks.

| S-EPMC6817848 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data