Dataset Information

Effects of user puff topography, device voltage, and liquid nicotine concentration on electronic cigarette nicotine yield: measurements and model predictions.

ABSTRACT:

Introduction

Some electronic cigarette (ECIG) users attain tobacco cigarette-like plasma nicotine concentrations while others do not. Understanding the factors that influence ECIG aerosol nicotine delivery is relevant to regulation, including product labeling and abuse liability. These factors may include user puff topography, ECIG liquid composition, and ECIG design features. This study addresses how these factors can influence ECIG nicotine yield.

Methods

Aerosols were machine generated with 1 type of ECIG cartridge (V4L CoolCart) using 5 distinct puff profiles representing a tobacco cigarette smoker (2-s puff duration, 33-ml/s puff velocity), a slow average ECIG user (4 s, 17 ml/s), a fast average user (4 s, 33 ml/s), a slow extreme user (8 s, 17 ml/s), and a fast extreme user (8 s, 33 ml/s). Output voltage (3.3-5.2 V or 3.0-7.5 W) and e-liquid nicotine concentration (18-36 mg/ml labeled concentration) were varied. A theoretical model was also developed to simulate the ECIG aerosol production process and to provide insight into the empirical observations.

Results

Nicotine yields from 15 puffs varied by more than 50-fold across conditions. Experienced ECIG user profiles (longer puffs) resulted in higher nicotine yields relative to the tobacco smoker (shorter puffs). Puff velocity had no effect on nicotine yield. Higher nicotine concentration and higher voltages resulted in higher nicotine yields. These results were predicted well by the theoretical model (R (2) = 0.99).

Conclusions

Depending on puff conditions and product features, 15 puffs from an ECIG can provide far less or far more nicotine than a single tobacco cigarette. ECIG emissions can be predicted using physical principles, with knowledge of puff topography and a few ECIG device design parameters.

SUBMITTER: Talih S

PROVIDER: S-EPMC4837998 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Smoking topography parameters differ substantially between individual smokers and may lead to significant variation in tobacco smoke exposure and risk for tobacco-caused diseases. However, to date, little is known regarding the impact of individual puff parameters on the delivery of many harmful smoke constituents including carbonyls. To examine this, we determined the effect of altering individual puff parameters on mainstream smoke carbonyl levels in machine-smoked reference cigarettes. Carbonyls including formaldehyde, acetaldehyde, crotonaldehyde, propionaldehyde, methyl ethyl ketone (MEK), acrolein, and acetone were determined in cigarette smoke by HPLC after derivatization with 2,4-dinitrophenylhydrazine (DNPH). Deliveries of all carbonyls were nearly two-fold greater when cigarettes were smoked according to the more intense Health Canada Intense (HCI) protocol compared to the International Organization of Standardization (ISO) method, consistent with the two-fold difference in total puff volume between methods (ISO: 280-315 mL; CI: 495-605 mL). When individual topography parameters were assessed, changes in puff volume alone had the greatest effect on carbonyl delivery as predicted with total carbonyls being strongly correlated with overall puff volume (r2: 0.52-0.99) regardless of how the differences in volume were achieved. All seven of the carbonyls examined showed a similar relationship with puff volume. Minor effects on carbonyl levels were observed from vent blocking and changing the interpuff interval, while effects of changing puff duration and peak flow rate were minimal. Overall, these results highlight the importance of considering topography, especially puff volume, when the toxicant delivery and potential exposure smokers receive are assessed. The lack of an impact of other behaviors, including puff intensity and duration independent of volume, indicate that factors such as temperature and peak flow rate may have minimal overall effects on carbonyl production and delivery.

Project description:IntroductionDocumenting factors that influence differential sensitivity to acutely inhaled nicotine products requires carefully controlling the amount of exposure (dose), and thus a procedure by which to control such exposure.MethodsWe evaluated consistency of puff volume from intermittent acute exposures to smoked tobacco cigarettes (study 1, n = 45, plus a comparison study of uninstructed use with n = 59) and to vaped electronic cigarettes (e-cigarettes; study 2, n = 27 naive to e-cigarettes) in adult-dependent smokers. All in primary studies 1 and 2 participated in research administering different nicotine levels in each product under blind conditions, one per session using within-subject designs. In both studies, participants followed an automated instructional procedure on a computer monitor standardizing the timing and amount of exposure to each product during a given trial, with four trials per session, each separated by 20 minutes. Puff volume per trial via Clinical Research Support System (CReSS) was the primary dependent measure to determine consistency across trials via intraclass correlation coefficients (ICCs).ResultsControl over topography with both inhaled products was demonstrated by highly significant ICCs for puff volume across trials. Instructed control with own brand was generally better in study 1 than with uninstructed smoking in the comparison sample, as expected. As intended, reliability of puff volume generally did not differ by menthol preference or sex in either study, but ICCs in study 2 tended to be lower for some men using the placebo e-cigarette.ConclusionsThis instructional procedure may substantially improve control over amounts of acute exposure to tobacco or e-cigarette use.ImplicationsControl over topography in studies of acute exposure to these inhaled products can potentially aid validity of research into differential sensitivity to use, so findings can be attributed to factors of interest and not to variable exposure. Our procedure minimized variability in exposure to the same product and between moderate nicotine products, but remaining differences suggest that compensation for very low or no nicotine commercial products may be difficult to totally eliminate with these instructions alone. Further study is needed to determine this procedure's utility with other inhaled products among experienced users and when comparing different products in between-groups analyses.

Project description:IntroductionThe ability to reliably measure real-world vaping behavior is critical to understand exposures to potential toxins. Commercially available mobile topography devices were originally designed to measure cigarette puffing behavior. Information regarding how applicable these devices are to the measurement of electronic cigarette (e-cigarette) vaping topography is needed.MethodsClinical Research Support System (CReSS; Pocket) and Smoking Puff Analyzer Mobile (SPA-M) topography devices were tested against the calibrated laboratory-based smoking puff analyzer duplicator (SPA-D) device combined with an analytical smoking machine that generates programmable puffs with high precision. Puff topography of e-cigarettes was measured over a range of puff volumes (10-130 mL) at 2 and 5 s puff durations (using bell- and square-shaped puffs). "Real-world" topography data collected from 10 participants during 1 week of at-home vaping were also analyzed. Recording anomalies and limitations of the devices, such as accuracy of detection of the puff end, flow rate dropouts, unreported puffs, and abandoned vaping sessions for the CReSS, and multi-peak puffs for the SPA-M were defined.ResultsThe accuracy of puff volumes and durations was determined for both devices. The error for SPA-M was generally within ±10%, whereas that for the CReSS varied more widely. The CReSS consistently underestimated puff duration at higher flow rates.ConclusionsCReSS and SPA-M topography devices can be used for real-world e-cigarette topography measurements, but researchers have to be aware of the limitations. Both devices can provide accurate measurements only under certain puff parameter ranges. The SPA-M provided more accurate measurements under a wider range of puffing parameters than the CReSS. Summary data reported by both devices require thorough analysis of the raw data to avoid misleading data interpretation.ImplicationsResults of this study provide researchers with valuable information about the capability of commercially available cigarette topography devices to measure real-world vaping behaviors. The differing measurement ranges of the two devices and puff recording limitations and anomalies should be taken into account during analysis and interpretation of real-world data.

Project description:IntroductionElectronic cigarettes e-cigarettes aerosolize a liquid solution often containing nicotine. e-cigarette nicotine delivery may be influenced by user puffing behaviors ("puff topography"). E-cigarette puff topography can be recorded using mouthpiece-based computerized systems. The present study sought to examine the extent to which these systems influence e-cigarette nicotine delivery and other e-cigarette associated acute effects under ad libitum use conditions.MethodsPlasma nicotine concentration, heart rate, and subjective effects were assessed in 29 experienced e-cigarette users using their preferred e-cigarette battery and liquid (?12mg/mL nicotine) in two sessions differing only by the presence of a mouthpiece-based device. In both sessions, participants completed a directed e-cigarette use bout (10 puffs, 30-s interpuff interval) and a 90-min ad libitum bout. Puff topography was recorded in the session with the topography mouthpiece.ResultsPlasma nicotine, heart rate, and subjective effects, aside from "Did the e-cigarette Taste Good?" were independent of topography measurement (higher mean taste ratings were observed in the no topography condition). Mean (SEM) plasma nicotine concentration following the ad libitum bout was 34.3ng/mL (4.9) in the no topography condition and 35.7ng/mL (4.3) in the topography condition. Longer puff durations, longer interpuff intervals, and larger puff volumes were observed in the ad libitum relative to the directed bout.ConclusionsE-cigarette use significantly increased plasma nicotine concentration and heart rate while suppressing abstinence symptoms. These effects did not differ when a topography mouthpiece was present. Future studies using ad libitum e-cigarette use bouts would facilitate understanding of e-cigarette toxicant yield.ImplicationsNo prior study has examined whether mouthpiece-based topography recording devices influence e-cigarette associated nicotine delivery, heart rate, or subjective effects under ad libitum conditions or assessed ad libitum puff topography in experienced individuals using their preferred e-cigarette battery and liquid with a mouthpiece-based computerized device. E-cigarette use significantly increased plasma nicotine concentration and heart rate while suppressing abstinence symptoms. These effects did not differ when a topography mouthpiece was present. Ad libitum puff topography differed from puff topography recorded during directed puffing. These findings suggest that future studies using ad libitum use bouts would facilitate better understanding of e-cigarette toxicant yield.