Graphene Oxide-Based Sensor for Ultrasensitive Visual Detection of Fluoride.
Ontology highlight
ABSTRACT:
SUBMITTER: Mandal TK
PROVIDER: S-EPMC5157177 | biostudies-literature | 2016 Dec
REPOSITORIES: biostudies-literature
Publications
Graphene Oxide-Based Sensor for Ultrasensitive Visual Detection of Fluoride.
Mandal Tapas K TK Hou Yi Y Gao Zhenyu Z Ning Haoran H Yang Wensheng W Gao Mingyuan M
Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20160721 12
<b>Visual fluoride ion detection</b> with a detection limit down to pmol L<sup>-1</sup> is achieved through quenching/reactivating the fluorescence of N-doped graphene oxide. ...[more]
Similar Datasets
Project description:MicroRNAs (miRNAs) are a family of conserved small noncoding RNAs whose expression is associated with many diseases, including cancer. Salivary miRNAs are gaining popularity as noninvasive diagnostic biomarkers for cancer and other systemic disorders, but their use is limited by their low abundance and complicated detection procedure. Herein, we present a novel self-assembly approach based on rolling circle amplification (RCA) and graphene oxide (GO) for the ultrasensitive detection of miRNA21 and miRNA16 (miRNA oral cancer biomarkers in human saliva). First, target miRNA hybridizes with the RCA template. In the presence of DNA polymerase, the RCA reaction is induced and sequences matching the template are generated. Then, a nicking enzyme cuts the long ssDNA product into tiny pieces to obtain the amplified products. The DNA-decorated GO sensor was fabricated by preabsorbing the ssDNA fluorescence-labeled probe on the GO surface, resulting in fluorescence quenching. The DNA-decorated GO sensor could detect the amplified product via the self-assembly of dsDNA, leading to the desorption and recovery of the fluorescence-labeled probe. Under optimal conditions, the proposed system exhibited ultrasensitive detection; the detection limits of miRNA16 and miRNA21 were 8.81 and 3.85 fM, respectively. It showed a wide range of detection between 10 fM and 100 pM for miRNA16 and between 10 fM and 1 nM for miRNA16. It demonstrated high selectivity, distinguishing between 1- and 3-mismatch nucleotides in target miRNA. Overall, our proposed DNA-decorated GO sensor can accurately detect the salivary miRNAs and may potentially be used for the diagnosis and screening of early-stage oral cancer.
| S-EPMC10157686 | biostudies-literature
Project description:Quick detection of DNA sequence is vital for many fields, especially, early-stage diagnosis. Here, we develop a graphene oxide-based fluorescence quenching sensor to quickly and accurately detect small amounts of a single strand of DNA. In this paper, fluorescent magnetic nanoparticles (FMNPs) modified with target DNA sequence (DNA-t) were bound onto the modified graphene oxide acting as the fluorescence quenching element. FMNPs are made of iron oxide (Fe3O4) core and fluorescent silica (SiO2) shell. The average particle size of FMNPs was 74 ± 6 nm and the average thickness of the silica shell, estimated from TEM results, was 30 ± 4 nm. The photoluminescence and magnetic properties of FMNPs have been investigated. Target oligonucleotide (DNA-t) was conjugated onto FMNPs through glutaraldehyde crosslinking. Meanwhile, graphene oxide (GO) nanosheets were produced by a modified Hummers method. A complementary oligonucleotide (DNA-c) was designed to interact with GO. In the presence of GO-modified with DNA-c, the fluorescence intensity of FMNPs modified with DNA-t was quenched through a FRET quenching mechanism. Our study indicates that FMNPs can not only act as a FRET donor, but also enhance the sensor accuracy by magnetically separating the sensing system from free DNA and non-hybridized GO. Results indicate that this sensing system is ideal to detect small amounts of DNA-t with limitation detection at 0.12 µM.
| S-EPMC6627418 | biostudies-literature
Project description:A novel biosensing platform was developed by integrating a new ssDNA aptamer and graphene oxide (GO) for highly sensitive and selective detection of liver cancer biomarkers (alpha-fetoprotein, AFP). The key concept of this biosensing platform is that the fluorescence of dye-modified ssDNA can be effectively quenched by GO after forming the hybrid structure of graphene oxide-ssDNA (GO-ssDNA). The AFP can selectively react with GO-ssDNA and lead to the decomposition of GO-ssDNA, which results in the recovery of fluorescence, and an increase in fluorescence intensity with the increasing concentration of AFP in the range of 0 to 300 pg mL-1. The linear range was obtained from 1 to 150 pg mL-1 and the detection limit was 0.909 pg mL-1. Moreover, this biosensing platform can be applied to serum and cell imaging for the detection of AFP. The results show that the proposed biosensor has great potential application in AFP-related clinical diagnosis and research.
| S-EPMC9091683 | biostudies-literature
Project description:Water quality is widely discussed owing to its significance in public health due to the inability to access clean water. Waterborne diseases account for the presence of pathogens like Escherichia coli (E. coli) in drinking water in the environmental community. Owing to the rapid increase of such bacterial microorganisms, a cost-effective sensor setup has been developed. Herein, we demonstrate the amine-functionalized graphene oxide (fGO) based 2D nanomaterial used to graft E. coli on its surface. The comparative analysis of the deposition of nanosheets on the glass substrate and PDMS was executed. The impedance variations of GO-based nanosensor at various concentrations of E. coli were performed and their potential difference was recorded. It was observed that the impedance changes inversely with the bacterial concentrations and was fed to the Arduino microcontroller. The experimental setup was standardized for the range of 0.01 Hz to 100 kHz. The obtained analog data was programmed with a microcontroller and the bacterial concentration in colony-forming units was displayed. The real-time analysis showsthe low-level detection of E. coli in aquatic environments. Experiments were conducted using the developed nanosensor to test the efficiency in complex water matrices and whose behavior changes with various physical, chemical, and environmental factors.
| S-EPMC8377045 | biostudies-literature
Project description:Ultrasensitive room temperature real-time NO₂ sensors are highly desirable due to potential threats on environmental security and personal respiratory. Traditional NO₂ gas sensors with highly operated temperatures (200-600 °C) and limited reversibility are mainly constructed from semiconducting oxide-deposited ceramic tubes or inter-finger probes. Herein, we report the functionalized graphene network film sensors assembled on an electrospun three-dimensional (3D) nanonetwork skeleton for ultrasensitive NO₂ sensing. The functional 3D scaffold was prepared by electrospinning interconnected polyacrylonitrile (PAN) nanofibers onto a nylon window screen to provide a 3D nanonetwork skeleton. Then, the sulfophenyl-functionalized reduced graphene oxide (SFRGO) was assembled on the electrospun 3D nanonetwork skeleton to form SFRGO network films. The assembled functionalized graphene network film sensors exhibit excellent NO₂ sensing performance (10 ppb to 20 ppm) at room temperature, reliable reversibility, good selectivity, and better sensing cycle stability. These improvements can be ascribed to the functionalization of graphene with electron-withdrawing sulfophenyl groups, the high surface-to-volume ratio, and the effective sensing channels from SFRGO wrapping onto the interconnected 3D scaffold. The SFRGO network-sensing film has the advantages of simple preparation, low cost, good processability, and ultrasensitive NO₂ sensing, all advantages that can be utilized for potential integration into smart windows and wearable electronic devices for real-time household gas sensors.
| S-EPMC5751658 | biostudies-literature
Project description:An immobilization-free electrochemical sensor coupled with a graphene oxide (GO)-based aptasensor was developed for glycated human serum albumin (GHSA) detection. The concentration of GHSA was monitored by measuring the electrochemical response of free GO and aptamer-bound GO in the presence of glycated albumin; their currents served as the analytical signals. The electrochemical aptasensor exhibited good performance with a base-10 logarithmic scale. The calibration curve was achieved in the range of 0.01-50 µg/mL. The limit of detection (LOD) was 8.70 ng/mL. The developed method was considered a one-drop measurement process because a fabrication step and the probe-immobilization process were not required. This simple sensor offers a cost-effective, rapid, and sensitive detection method, and could be an alternative approach for determination of GHSA levels.
| S-EPMC8002523 | biostudies-literature
Project description:For highly sensitive detection of 4-nitrophenol (4-NP) in the environment, a novel pyridine diketopyrrolopyrrole-functionalized graphene oxide (PDPP-GO) composite was constructed for the first time by an improved Hummers' method. Herein, PDPP was completely dissolved in sulfuric acid (6 mol L-1) and reacted with GO, promoting PDPP evenly adhering to the GO surface. Moreover, the specific surface area increased from 15.51 to 22.033 m2 g-1. Infrared spectroscopy and X-ray photoelectron spectroscopy simultaneously demonstrated that PDPP was bound to GO by the strong intermolecular hydrogen bonding and π-π stacking conjugation. During the cyclic voltammetry test, the PDPP-GO coated glassy carbon electrode (PDPP-GO/GCE) direct electrochemical sensor gave expression to the best electrocatalytic activity for 4-nitrophenol detection than GO/GCE and bare GCE. Under optimization conditions, the as-prepared PDPP-GO/GCE sensor brought out remarkable sensitivities of 18.54 (0.5-50 μM) and 6.61 μA μM-1 cm-2 (50-163 μM) in the linear detection of 4-NP. Besides, a low detection limit of 0.10 μM, reliable long-term stability, excellent selectivity, and reproducibility were obtained. In the real sample test, the PDPP-GO/GCE demonstrated sensitive and reliable determination.
| S-EPMC9837858 | biostudies-literature
Project description:Signal amplification is crucial in developing a reliable disposable screen-printed carbon electrodes (SPCEs)-based biosensor for analyte detection with a narrow detection window. This work demonstrated a novel label-free electrochemical aptasensor based on SPCEs for the ultrasensitive detection of ochratoxin A (OTA). The graphene oxide-DNA (GO-DNA) complex as a signal amplifier with easy preparation was investigated for the first time. The proposed aptasensor based on the SPCEs/GO/cDNA-aptamer/3D-rGO-AuNPs structure was formed through the hybridization of aptamer-linked 3D-rGO/AuNPs and its complementary DNA-linked GO (GO-cDNA). The presence of OTA was discerned by its specific aptamer forming a curled OTA-aptamer complex and releasing the GO-cDNA from the surface of SPCEs. The resulting OTA-aptamer complex hindered interfacial electron transfer on the sensing surface, leading to the decreased peak current. The GO-cDNA further amplified the peak current change. This electrochemical aptasensor showed a low limit of detection of 5 fg/mL as well as good reproducibility with the relative standard deviation (RSD) of 4.38%. Moreover, the detection result of OTA in the rice and oat samples was comparable with that of the enzyme-linked immunosorbent assay (ELISA) kit. In general, the OTA aptasensor used in this work with convenient preparation, low-cost, good selectivity, high sensitivity and acceptable reproducibility can be proposed as a reliable point-of-care (POC) technique for OTA determination.
| S-EPMC9228252 | biostudies-literature
Project description:Ten-eleven translocation (TET) proteins orchestrate deoxyribonucleic acid (DNA) methylation-demethylation dynamics by oxidizing 5-methylcytosine to 5-hydroxymethylcytosine (5hmC) and are frequently inactivated in various cancers. Due to the significance of 5hmC as an epigenetic biomarker for cancer diagnosis, pathogenesis, and treatment, its rapid and precise quantification is essential. Here, we report a highly sensitive electrochemical method for quantifying genomic 5hmC using graphene sheets that were electrochemically exfoliated and functionalized with biotin and gold nanoparticles (Bt-AuNPs) through a single-step electrical method. The attachment of Bt-AuNPs to graphene enhances the specificity of 5hmC-containing DNA and augments the oxidation of 5hmC to 5-formylcytosine in DNA. When coupled to a gold electrode, the Bt-AuNP-graphene-based sensor exhibits exceptional sensitivity and specificity for detecting 5hmC, with a detection limit of 63.2 fM. Furthermore, our sensor exhibits a remarkable capacity to measure 5hmC levels across a range of biological samples, including preclinical mouse tissues with varying 5hmC levels due to either TET gene disruption or oncogenic transformation, as well as human prostate cancer cell lines. Therefore, our sensing strategy has substantial potential for cancer diagnostics and prognosis.
| S-EPMC11234158 | biostudies-literature
Project description:Despite recent progresses in the field of microfluidics, the effect of liquid pressure on the detection accuracy has been rarely studied. Here, we perform a quantitative analysis of such effect, by utilizing the sensitive optical responses of graphene to the refractive index (RI) change of its surrounding environment. We utilize a reflection coupling configuration by combining the total internal reflection (TIR) and ultrasonic waves. The high-performance graphene is processed on common glasses by using the solution-processable oxidation-reduction method. We find that the RI change of water caused by a pressure as small as 500 Pa generated by the liquid level change in the microfluidics can be measured directly. The detection accuracy and response time limits are approximately 280 Pa and 100 ns, respectively. The Maxwell's boundary conditions, Fresnel's law, and Pascal's law are used in theoretical analyses. This work highlights the importance of liquid pressure in microfluidics and provides guidance in designing and accurate detection of microfluidic devices.
| S-EPMC6555094 | biostudies-literature