Ionic Liquid-Based Microemulsions in Catalysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Hejazifar M
PROVIDER: S-EPMC5168648 | biostudies-literature | 2016 Dec
REPOSITORIES: biostudies-literature
Publications
Ionic Liquid-Based Microemulsions in Catalysis.
Hejazifar Mahtab M Earle Martyn M Seddon Kenneth R KR Weber Stefan S Zirbs Ronald R Bica Katharina K
The Journal of organic chemistry 20161206 24
The design and properties of surface-active ionic liquids that are able to form stable microemulsions with heptane and water are presented, and their promise as reaction media for thermomorphic palladium-catalyzed cross-coupling reactions is demonstrated. ...[more]
Similar Datasets
Project description:For the first time, Zn-metal-organic frameworks (Zn-MOFs) were prepared using Zn2+ and the aromatic ligand 1,3,5-benzenetricarboxylic acid (BTC) in ionic liquid microemulsions stabilized by the surfactant TX-100. This proposed environmentally friendly approach to synthesize Zn-MOFs is simple, requires no energy input, and operates at room temperature. The synthesized Zn-MOFs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), single crystal X-ray diffraction and powder X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR). The results showed that two different Zn-MOF crystals had been successfully synthesized and that [NaZn(C9H3O6)(H2O)4]·1.5H2O was prepared by using this method for the first time. The influence of different parameters such as the pH value, the ratio of reactants, and reaction time on the morphology and size of the Zn-MOFs was studied. Long rod Zn-MOFs with an average size of ∼25 μm could be obtained in the ionic liquid microemulsions with a molar ratio (organic ligand to metal ion) of 1 : 1 at pH 5.98 for 24 h. The crystal type and morphology of the Zn-MOFs could be controlled by the ionic liquid microemulsions at room temperature. This green synthesis method can be used to study their industrial production.
| S-EPMC9082767 | biostudies-literature
Project description:Gels that are freeze-resistant and heat-resistant and have high ultimate tensile strength are desirable in practical applications owing to their potential in designing flexible energy storage devices, actuators, and sensors. Here, a simple method for fabricating ionic liquid (IL)-based click-ionogels using thiol-ene click chemistry under mild condition is reported. These click-ionogels continue to exhibit excellent mechanical properties and resilience after 10,000 fatigue cycles. Moreover, due to several unique properties of ILs, these click-ionogels exhibit high ionic conductivity, transparency, and nonflammability performance over a wide temperature range (-75° to 340°C). Click-ionogel-based triboelectric nanogenerators exhibit excellent mechanical, freeze-thaw, and heat stability. These promising features of click-ionogels will promote innovative applications in flexible and safe device design.
| S-EPMC6707778 | biostudies-literature
Project description:A hydrophobic gadolinium-based magnetic ionic liquid (MIL) was investigated for the first time as an extraction solvent in dispersive liquid-liquid microextraction (DLLME). The tested MIL was composed of trihexyl(tetradecyl)phosphonium cations and paramagnetic gadolinium chloride anions. The prepared MIL showed low water miscibility, reasonable viscosity, markedly high magnetic susceptibility, adequate chemical stability, low UV background, and compatibility with reversed-phase HPLC solvents. These features resulted in a more efficient extraction than the corresponding iron or manganese analogues. Accordingly, the overall method sensitivity and reproducibility were improved, and the analysis time was reduced. The applicability of the proposed MIL was examined through the microextraction of four sartan antihypertensive drugs from aqueous samples followed by reversed-phase HPLC with UV detection at 240 nm. The DLLME procedures were optimized for disperser solvent type, MIL mass, disperser solvent volume, as well as acid, base, and salt addition. The limits of quantitation (LOQs) obtained with the analysis of 1.2-mL samples after DLLME and HPLC were 80, 30, 40, and 160 ng/mL for azilsartan medoxomil, irbesartan, telmisartan, and valsartan, respectively. Correlation coefficients were greater than 0.9988 and RSD values were in the range of 2.48-4.07%. Under the optimized microextraction conditions and using a 5-mL sample volume, enrichment factors were raised from about 40 for all sartans using a 1.2-mL sample to 175, 176, 169, and 103 for azilsartan medoxomil, irbesartan, valsartan, and telmisartan, respectively. The relative extraction recoveries for the studied sartans in river water varied from 82.5 to 101.48% at a spiked concentration of 0.5 ?g/mL for telmisartan and irbesartan and 1 ?g/mL for azilsartan medoxomil and valsartan. Graphical abstract.
| S-EPMC7581952 | biostudies-literature
Project description:The transdermal delivery of sparingly soluble drugs is challenging due to of the need for a drug carrier. In the past few decades, ionic liquid (IL)-in-oil microemulsions (IL/O MEs) have been developed as potential carriers. By focusing on biocompatibility, we report on an IL/O ME that is designed to enhance the solubility and transdermal delivery of the sparingly soluble drug, acyclovir. The prepared MEs were composed of a hydrophilic IL (choline formate, choline lactate, or choline propionate) as the non-aqueous polar phase and a surface-active IL (choline oleate) as the surfactant in combination with sorbitan laurate in a continuous oil phase. The selected ILs were all biologically active ions. Optimized pseudo ternary phase diagrams indicated the MEs formed thermodynamically stable, spherically shaped, and nano-sized (<100 nm) droplets. An in vitro drug permeation study, using pig skin, showed the significantly enhanced permeation of acyclovir using the ME. A Fourier transform infrared spectroscopy study showed a reduction of the skin barrier function with the ME. Finally, a skin irritation study showed a high cell survival rate (>90%) with the ME compared with Dulbecco's phosphate-buffered saline, indicates the biocompatibility of the ME. Therefore, we conclude that IL/O ME may be a promising nano-carrier for the transdermal delivery of sparingly soluble drugs.
| S-EPMC7238071 | biostudies-literature
Project description:A series of clickable α-azide-ω-alkyne ionic liquid (IL) monomers with an ethylene oxide spacer were developed and applied to the synthesis of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) with high ionic conductivities via one-step thermal azide-alkyne cycloaddition click chemistry. Subsequently, the number of IL moieties in the resultant TPILs was further increased by N-alkylation of the 1,2,3-triazole-based backbones of the TPILs with a quarternizing reagent. This strategy affords the preparation of TPILs having either one or two 1,2,3-triazolium cations with bis(trifluoromethylsulfonyl)imide anions in a monomer unit. Synthesis of the TPILs was confirmed by 1H and 13C NMR spectroscopy and gel permeation chromatography. The effects of the length of the ethylene oxide spacer and the number of IL moieties in the IL monomer unit on the physicochemical properties of the TPILs were characterized by differential scanning calorimetry, thermogravimetric analysis, and impedance spectroscopy. The introduction of a longer ethylene oxide spacer or an increase in the number of IL moieties in the monomer unit resulted in TPILs with lower glass-transition temperatures and higher ionic conductivities. The highest ionic conductivity achieved in this study was 2.0 × 10-5 S cm-1 at 30 °C. These results suggest that the design of the IL monomer provides the resultant polymer with high chain flexibility and a high IL density, and so it is effective for preparing TPILs with high ionic conductivities.
| S-EPMC8153667 | biostudies-literature
Project description:The ability to induce reversible phase transitions between homogeneous solutions and biphasic liquid-liquid systems, at pre-defined and suitable operating temperatures, is of crucial relevance in the design of separation processes. Ionic-liquid-based aqueous biphasic systems (IL-based ABS) have demonstrated superior performance as alternative extraction platforms, and their thermoreversible behaviour is here disclosed by the use of protic ILs. The applicability of the temperature-induced phase switching is further demonstrated with the complete extraction of two value-added proteins, achieved in a single-step. It is shown that these temperature-induced mono(bi)phasic systems are significantly more versatile than classical liquid-liquid systems which are constrained by their critical temperatures. IL-based ABS allow to work in a wide range of temperatures and compositions which can be tailored to fit the requirements of a given separation process.
| S-EPMC4740753 | biostudies-literature
Project description:A novel pH sensitive, colorimetric ionic liquid nanosensor based on phosphonium salts of fluorescein is reported. Herein, fluorescein salts of various stoichiometries were synthesized by use of a trihexyltetradecylphosphonium cation [TTP]+ in combination with dianionic [FL]2- and monoanionic [FL]- fluorescein. Nanomaterials derived from these two compounds yielded contrasting colorimetric responses in neutral and acidic environments. Variations in fluorescence spectra as a function of pH were also observed. Examination of TEM and DLS data revealed significant expansion in the diameter of [TTP]2[FL] nanodroplets in acidic environments of variable pHs. A similar trend was also observed for [TTP][FL] nanoparticles. The pH dependent colorimetric and other optical properties of these nanomaterials are attributed to alterations in molecular orientations and stacking as suggested by measuring the absorption, fluorescence, and zeta potential. Since the pH is an important indicator for many diseases, including cancer, these nanosensors are considered to be potential candidates for biomedical applications.
| S-EPMC4174468 | biostudies-literature
Project description:The mechanisms of a tetrasubstituted imidazole [2-(2,4,5-triphenyl-1?H-imidazol-1-yl)ethan-1-ol] synthesis from benzil, benzaldehyde, ammonium acetate, and ethanolamine in [Et2NH2][HSO4] ionic liquid (IL) are studied computationally. The effects of the presence of the cationic and anionic components of the IL on transition states and intermediate structures, acting as a solvent versus as a catalyst, are determined. In IL-free medium, carbonyl hydroxylation when using a nucleophile (ammonia) proceeds with a Gibbs free energy (?G?) barrier of 49.4?kcal?mol-1. Cationic and anionic hydrogen-bond solute-solvent interactions with the IL decrease the barrier to 35.8?kcal?mol-1. [Et2NH2][HSO4] incorporation in the reaction changes the nature of the transition states and decreases the energy barriers dramatically, creating a catalytic effect. For example, carbonyl hydroxylation proceeds via two transition states, first proton donation to the carbonyl (?G?=9.2?kcal?mol-1) from [Et2NH2]+, and then deprotonation of ammonia (?G?=14.3) via Et2NH. Likewise, incorporation of the anion component [HSO4]- of the IL gives comparable activation energies along the same reaction route and the lowest transition state for the product formation step. We propose a dual catalytic IL effect for the mechanism of imidazole formation. The computations demonstrate a clear distinction between IL solvent effects on the reaction and IL catalysis.
| S-EPMC5062012 | biostudies-literature
Project description:The structure of 1-methyl-2-(prop-2-en-1-ylsulfan-yl)-1H-imidazol-3-ium bromide, C7H11N2S(+)·Br(-), has monoclinic (P21/c) symmetry. In the crystal, the components are linked by N-H?Br and C-H?Br hydrogen bonds. The crystal structure of the title compound undeniably proves that methimazole reacts through the thione tautomer, rather than the thiol tautomer in this system.
| S-EPMC4719949 | biostudies-literature
Project description:A brush type nanomotor was fabricated via assembly assistant polymerization of poly(ionic liquid) and surface grafting polymerization. The method for large-scale fabrication of brush nanomotors with soft surfaces is described. These soft locomotive particles are based on core-shell brush nanoparticles assembled from poly(ionic liquid) as core and thermoresponsive PNIPAM as brush shells on which platinum nanoparticle (PtNP) were grown in situ. The particles show non-Brownian motion in H?O? solution.
| S-EPMC6082249 | biostudies-literature