Dataset Information

Estimates of genetic parameters for chemical traits of meat quality in Japanese black cattle.

ABSTRACT: Genetic parameters for 54 carcass and chemical traits, such as general composition (moisture, crude fat and crude protein), fatty acid composition and water-soluble compounds (free amino acids, peptides, nucleotides and sugars) of 587 commercial Japanese Black cattle were assessed. Heritability estimates for carcass traits and general composition ranged between 0.19-0.28, whereas those for fatty acid composition ranged between 0.11-0.85. Most heritability estimates for water-soluble compounds were lower than 0.30; these traits were affected by aging period. Moderate heritability was observed for glutamine, alanine, taurine, anserine, inosine 5'-monophosphate (IMP), inosine and myo-inositol. In particular, heritability estimates were the highest (0.66) for taurine. Traits with moderate heritability were unaffected by aging period, with the exception of IMP, which was affected by aging period but exhibited moderate heritability (0.47). Although phenotypic correlations of water-soluble compounds with carcass weight (CW), beef marbling standard (BMS) and monounsaturated fatty acid were generally low, genetic correlations between these traits were low to high. At the genetic level, most of the water-soluble compounds were positively correlated with monounsaturated fatty acid but negatively correlated with CW and BMS. Thus, our results indicate that genetic variance and correlations could exist and be captured for some of the water-soluble compounds.

SUBMITTER: Sakuma H

PROVIDER: S-EPMC5298003 | biostudies-literature | 2017 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Estimates of genetic parameters for chemical traits of meat quality in Japanese black cattle.

Sakuma Hironori H Saito Kaoru K Kohira Kimiko K Ohhashi Fumie F Shoji Noriaki N Uemoto Yoshinobu Y

Animal science journal = Nihon chikusan Gakkaiho 20160505 2

Genetic parameters for 54 carcass and chemical traits, such as general composition (moisture, crude fat and crude protein), fatty acid composition and water-soluble compounds (free amino acids, peptides, nucleotides and sugars) of 587 commercial Japanese Black cattle were assessed. Heritability estimates for carcass traits and general composition ranged between 0.19-0.28, whereas those for fatty acid composition ranged between 0.11-0.85. Most heritability estimates for water-soluble compounds we ...[more]

PMID: 27146072

Similar Datasets

Project description:We evaluated the genetic relationships (1) among feed efficiency traits with different fattening periods, (2) between feed efficiency traits and growth traits, and (3) between feed efficiency traits and carcass traits, to determine the influence of genetic factors on feed efficiency traits. In total, 4,578 Japanese Black cattle from a progeny testing program were used. Residual feed intake (RFI), residual BW gain (RG), and residual intake and BW gain (RIG) were defined as feed efficiency traits, and were measured for the first half (approximately 9 to 15 months of age), latter half (approximately 15 to 21 months of age), and total period of fattening (approximately 9 to 21 months of age). A single-trait animal model for estimating heritability and a two-trait animal model for estimating genetic and phenotypic correlations were used. The heritability estimates for RFI, RG, and RIG were different in each fattening period, ranging from 0.36 to 0.46, 0.19 to 0.28, and 0.28 to 0.34, respectively, and the heritability estimates for the total fattening period were greater than those for the first and latter halves separately. RIG showed the greatest preferred genetic correlation, with a greater feed conversion ratio than the other feed efficiency traits (ranging from -0.84 to -0.96). RG in the first and latter halves of the fattening period had different genetic correlations with the growth starting point (0.82 and -0.06, respectively) and maturity rate (0.49 and -0.51, respectively) of the Gompertz growth curve parameters, and is strongly dependent on the different fattening periods. Feed efficiency traits in different fattening periods had low genetic correlations with the carcass traits (from -0.05 to 0.19 for RFI; from 0.02 to 0.31 for RG; and from -0.11 to 0.20 for RIG). This study indicated the possibility for genetic improvement through the selection of high-RIG animals to decrease feed intake and increase BW gain without any unfavorable correlated responses affecting mature (asymptotic) weight and carcass grade.

Project description:Swine industry breeding goals are mostly directed towards meat quality and carcass traits due to their high economic value. Yet, studies on meat quality and carcass traits including both phenotypic and genotypic information remain limited, particularly in commercial crossbred swine. The objectives of this study were to estimate the heritabilities for different carcass composition traits and meat quality traits and to estimate the genetic and phenotypic correlations between meat quality, carcass composition, and growth traits in 2 large commercial swine populations: The Maschhoffs LLC (TML) and Smithfield Premium Genetics (SPG), using genotypes and phenotypes data. The TML data set consists of 1,254 crossbred pigs genotyped with 60K SNP chip and phenotyped for meat quality, carcass composition, and growth traits. The SPG population included over 35,000 crossbred pigs phenotyped for meat quality, carcass composition, and growth traits. For TML data sets, the model included fixed effects of dam line, contemporary group (CG), gender, as well as random additive genetic effect and pen nested within CG. For the SPG data set, fixed effects included parity, gender, and CG, as well as random additive genetic effect and harvest group. Analyses were conducted using BLUPF90 suite of programs. Univariate and bivariate analyses were implemented to estimate heritabilities and correlations among traits. Primal yield traits were uniquely created in this study. Heritabilities [high posterior density interval] of meat quality traits ranged from 0.08 [0.03, 0.16] for pH and 0.08 [0.03, 0.1] for Minolta b* to 0.27 [0.22, 0.32] for marbling score, except intramuscular fat with the highest estimate of 0.52 [0.40, 0.62]. Heritabilities of primal yield traits were higher than that of primal weight traits and ranged from 0.17 [0.13, 0.25] for butt yield to 0.45 [0.36, 0.55] for ham yield. The genetic correlations of meat quality and carcass composition traits with growth traits ranged from moderate to high in both directions. High genetic correlations were observed for male and female for all traits except pH. The genetic parameter estimates of this study indicate that a multitrait approach should be considered for selection programs aimed at meat quality and carcass composition in commercial swine populations.

Project description:The Montana Tropical® Composite is a recently developed beef cattle population that is rapidly expanding in Brazil and other tropical countries. This is mainly due to its improved meat quality and adaptation to tropical climate conditions compared to Zebu and Taurine cattle breeds, respectively. This study aimed to investigate the genetic architecture of ultrasound-based carcass and meat quality traits in Montana Tropical® Composite beef cattle. Therefore, we estimated variance components and genetic parameters and performed genome-wide association studies using the weighted single-step Genomic Best Linear Unbiased Prediction (GBLUP) approach. A pedigree dataset containing 28,480 animals was used, in which 1,436 were genotyped using a moderate-density Single Nucleotide Polymorphism panel (30K; 30,105 SNPs). A total of 9,358, 5,768, 7,996, and 1,972 phenotypic records for the traits Longissimus muscle area (LMA), backfat thickness (BFT), rump fat thickness (RFT), and for marbling score (MARB), respectively, were used for the analyses. Moderate to high heritability estimates were obtained and ranged from 0.16 ± 0.03 (RFT) to 0.33 ± 0.05 (MARB). A high genetic correlation was observed between BFT and RFT (0.97 ± 0.02), suggesting that a similar set of genes affects both traits. The most relevant genomic regions associated with LMA, BFT, RFT, and MARB were found on BTA10 (5.4-5.8 Mb), BTA27 (25.2-25.5 Mb), BTA18 (60.6-61.0 Mb), and BTA21 (14.8-15.4 Mb). Two overlapping genomic regions were identified for RFT and MARB (BTA13:47.9-48.1 Mb) and for BFT and RFT (BTA13:61.5-62.3 Mb). Candidate genes identified in this study, including PLAG1, LYN, WWOX, and PLAGL2, were previously reported to be associated with growth, stature, skeletal muscle growth, fat thickness, and fatty acid composition. Our results indicate that ultrasound-based carcass and meat quality traits in the Montana Tropical® Composite beef cattle are heritable, and therefore, can be improved through selective breeding. In addition, various novel and already known genomic regions related to these traits were identified, which contribute to a better understanding of the underlying genetic background of LMA, BFT, RFT, and MARB in the Montana Tropical Composite population.

Project description:The objective of this study was to estimate genetic parameters for feet and leg traits, relationships within feet and leg traits, and relationships between feet and leg traits and production traits in Red Angus cattle. Subjective scores for 14 traits including body condition score (BCS), front hoof angle (FHA), front heel depth (FHD), front claw shape (FCS), rear hoof angle (RHA), rear heel depth (RHD), rear claw shape (RCS), size of hoof (SIZE), front side view (FSV), knee orientation (KNEE), front hoof orientation (FHO), rear side view (RSV), rear view (RV), and a composite score (COMP) were collected by trained evaluators on 1,720 Red Angus cattle. All traits except COMP were scored as intermediate optimum traits. Performance data, and EPD were obtained on all animals measured and a three-generation pedigree was obtained from the Red Angus Association of America (RAAA) that contained 13,306 animals. Data were modeled using a linear bivariate animal model with random additive genetic and residual effects, and fixed effects of age and contemporary group (herd-year) implemented in ASREML 4.0. Heritability estimates of BCS, FHA, FHD, FCS, RHA, RHD, RCS, SIZE, FSV, KNEE, FHO, RSV, RV, and COMP were 0.11, 0.20, 0.17, 0.09, 0.19, 0.25, 0.17, 0.36, 0.16, 0.17, 0.17, 0.30, 0.14, and 0.12, respectively. These results demonstrate feet and leg traits are lowly to moderately heritable. Strong, positive genetic correlations were observed between FHA and FHD (0.89), FHA and RHA (0.88), FHD and RHA (0.85), FHA and RHD (0.85), FHD and RHD (0.94), and FHO and KNEE (0.95), indicating these traits were highly related to each other. Strong and negative genetic correlations were observed between KNEE and FSV (-0.59) and FHO and FSV (-0.75). The strongest Pearson correlation between front limb traits (FHA, FHD, FSV, FHO, KNEE, and COMP) and Stayability EPD (STAY) was FSV (r = 0.16) and for rear limb traits (RHA, RHD, RCS, RSV, RV, and COMP) and STAY was RCS (r = -0.12). This suggests cattle with more slope to the angle of the shoulder and cattle with less evidence of hoof curl may stay in the herd longer. Further investigation into the economic viability of feet and leg trait genetic prediction with a larger population of animals is required to help validate these findings.

Project description:BackgroundCurrently, meat cut traits are integrated in pig breeding objectives to gain extra profit. However, little is known about the heritability of meat cut proportions (MCP) and their correlations with other traits. The aims of this study were to assess the heritability and genetic correlation of MCP with carcass and meat quality traits using single nucleotide polymorphism chips and conduct a genome-wide association study (GWAS) to identify candidate genes for MCP.ResultsSeventeen MCP, 12 carcass, and seven meat quality traits were measured in 2012 pigs from four populations (Landrace; Yorkshire; Landrace and Yorkshire hybrid pigs; Duroc, and Landrace and Yorkshire hybrid pigs). Estimates of the heritability for MCP ranged from 0.10 to 0.55, with most estimates being moderate to high and highly consistent across populations. In the combined population, the heritability estimates for the proportions of scapula bone, loin, back fat, leg bones, and boneless picnic shoulder were 0.44 ± 0.04, 0.36 ± 0.04, 0.44 ± 0.04, 0.38 ± 0.04, and 0.39 ± 0.04, respectively. Proportion of middle cuts was genetically significantly positively correlated with intramuscular fat content and backfat depth. Proportion of ribs was genetically positively correlated with carcass oblique length and straight length (0.35 ± 0.08 to 0.45 ± 0.07) and negatively correlated with backfat depth (- 0.26 ± 0.10 to - 0.45 ± 0.10). However, weak or nonsignificant genetic correlations were observed between most MCP, indicating their independence. Twenty-eight quantitative trait loci (QTL) for MCP were detected by GWAS, and 24 new candidate genes related to MCP were identified, which are involved with growth, height, and skeletal development. Most importantly, we found that the development of the bones in different parts of the body may be regulated by different genes, among which HMGA1 may be the strongest candidate gene affecting forelimb bone development. Moreover, as previously shown, VRTN is a causal gene affecting vertebra number, and BMP2 may be the strongest candidate gene affecting hindlimb bone development.ConclusionsOur results indicate that breeding programs for MCP have the potential to enhance carcass composition by increasing the proportion of expensive cuts and decreasing the proportion of inexpensive cuts. Since MCP are post-slaughter traits, the QTL and candidate genes related to these traits can be used for marker-assisted and genomic selection.

Dataset Information

Estimates of genetic parameters for chemical traits of meat quality in Japanese black cattle.

Publications

Estimates of genetic parameters for chemical traits of meat quality in Japanese black cattle.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets