Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Required coefficient of friction in the anteroposterior and mediolateral direction during turning at different walking speeds.

ABSTRACT: This study investigated the required coefficient of friction (RCOF) and the tangent of center of mass (COM)-center of pressure (COP) angle in the mediolateral (ML) and anteroposterior (AP) directions during turning at different walking speeds. Sixteen healthy young adults (8 males and 8 females) participated in this study. The participants were instructed to conduct trials of straight walking and 90° step and spin turns to the right at each of three self-selected speeds (slow, normal, and fast). The ML and AP directions during turning gait were defined using the orientation of the pelvis to construct a body-fixed reference frame. The RCOF values and COM-COP angle tangent in the ML direction during turning at weight acceptance phase were higher than those during straight walking, and those values increased with increasing walking speed. The ML component of the RCOF and COM-COP tangent values during weight acceptance for step turns were higher than those for spin turns. The mean centripetal force during turning tended to increase with an increase in walking speed and had a strong positive correlation with the RCOF values in the ML direction (R = 0.97 during the weight acceptance phase; R = 0.95 during the push-off phase). Therefore, turning, particularly step turn, is likely to cause lateral slip at weight acceptance because of the increased centripetal force compared with straight walking. Future work should test at-risk population and compare with the present results.

SUBMITTER: Yamaguchi T

PROVIDER: S-EPMC5480978 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Contributions of muscles to mediolateral ground reaction force over a range of walking speeds.

Project description:Impaired control of mediolateral body motion during walking is an important health concern. Developing treatments to improve mediolateral control is challenging, partly because the mechanisms by which muscles modulate mediolateral ground reaction force (and thereby modulate mediolateral acceleration of the body mass center) during unimpaired walking are poorly understood. To investigate this, we examined mediolateral ground reaction forces in eight unimpaired subjects walking at four speeds and determined the contributions of muscles, gravity, and velocity-related forces to the mediolateral ground reaction force by analyzing muscle-driven simulations of these subjects. During early stance (0-6% gait cycle), peak ground reaction force on the leading foot was directed laterally and increased significantly (p<0.05) with walking speed. During early single support (14-30% gait cycle), peak ground reaction force on the stance foot was directed medially and increased significantly (p<0.01) with speed. Muscles accounted for more than 92% of the mediolateral ground reaction force over all walking speeds, whereas gravity and velocity-related forces made relatively small contributions. Muscles coordinate mediolateral acceleration via an interplay between the medial ground reaction force contributed by the abductors and the lateral ground reaction forces contributed by the knee extensors, plantarflexors, and adductors. Our findings show how muscles that contribute to forward progression and body-weight support also modulate mediolateral acceleration of the body mass center while weight is transferred from one leg to another during double support.

| S-EPMC3438315 | biostudies-literature

Economy, Movement Dynamics, and Muscle Activity of Human Walking at Different Speeds.

Project description:The complex behaviour of human walking with respect to movement variability, economy and muscle activity is speed dependent. It is well known that a U-shaped relationship between walking speed and economy exists. However, it is an open question if the movement dynamics of joint angles and centre of mass and muscle activation strategy also exhibit a U-shaped relationship with walking speed. We investigated the dynamics of joint angle trajectories and the centre of mass accelerations at five different speeds ranging from 20 to 180% of the predicted preferred speed (based on Froude speed) in twelve healthy males. The muscle activation strategy and walking economy were also assessed. The movement dynamics was investigated using a combination of the largest Lyapunov exponent and correlation dimension. We observed an intermediate stage of the movement dynamics of the knee joint angle and the anterior-posterior and mediolateral centre of mass accelerations which coincided with the most energy-efficient walking speed. Furthermore, the dynamics of the joint angle trajectories and the muscle activation strategy was closely linked to the functional role and biomechanical constraints of the joints.

| S-EPMC5341064 | biostudies-literature

Friction coefficient dependence on electrostatic tribocharging.

Project description:Friction between dielectric surfaces produces patterns of fixed, stable electric charges that in turn contribute electrostatic components to surface interactions between the contacting solids. The literature presents a wealth of information on the electronic contributions to friction in metals and semiconductors but the effect of triboelectricity on friction coefficients of dielectrics is as yet poorly defined and understood. In this work, friction coefficients were measured on tribocharged polytetrafluoroethylene (PTFE), using three different techniques. As a result, friction coefficients at the macro- and nanoscales increase many-fold when PTFE surfaces are tribocharged, but this effect is eliminated by silanization of glass spheres rolling on PTFE. In conclusion, tribocharging may supersede all other contributions to macro- and nanoscale friction coefficients in PTFE and probably in other insulating polymers.

| S-EPMC3740278 | biostudies-literature

Pendular energy transduction within the step during human walking on slopes at different speeds.

Project description:When ascending (descending) a slope, positive (negative) work must be performed to overcome changes in gravitational potential energy at the center of body mass (COM). This modifies the pendulum-like behavior of walking. The aim of this study is to analyze how energy exchange and mechanical work done vary within a step across slopes and speeds. Ten subjects walked on an instrumented treadmill at different slopes (from -9° to 9°), and speeds (between 0.56 and 2.22 m s-1). From the ground reaction forces, we evaluated energy of the COM, recovery (i.e. the potential-kinetic energy transduction) and pendular energy savings (i.e. the theoretical reduction in work due to this recovered energy) throughout the step. When walking uphill as compared to level, pendular energy savings increase during the first part of stance (when the COM is lifted) and decreases during the second part. Conversely in downhill walking, pendular energy savings decrease during the first part of stance and increase during the second part (when the COM is lowered). In uphill and downhill walking, the main phase of external work occurs around double support. Uphill, the positive work phase is extended during the beginning of single support to raise the body. Downhill, the negative work phase starts before double support, slowing the downward velocity of the body. Changes of the pendulum-like behavior as a function of slope can be illustrated by tilting the 'classical compass model' backwards (uphill) or forwards (downhill).

| S-EPMC5658120 | biostudies-literature

Predicting slips based on the STM 603 whole-footwear tribometer under different coefficient of friction testing conditions.

Project description:Assessing footwear slip-resistance is critical to preventing slip and fall accidents. The STM 603 (SATRA Technology) is commonly used to assess footwear friction but its ability to predict human slips while walking is unclear. This study assessed this apparatus' ability to predict slips across footwear designs and to determine if modifying the test parameters alters predictions. The available coefficient of friction (ACOF) was measured with the device for nine different footwear designs using 12 testing conditions with varying vertical force, speed and shoe angle. The occurrence of slipping and the required coefficient of friction was quantified from human gait data including 124 exposures to liquid contaminants. ACOF values varied across the test conditions leading to different slip prediction models. Generally, a steeper shoe angle (13°) and higher vertical forces (400 or 500?N) modestly improved predictions of slipping. This study can potentially guide improvements in predictive test conditions for this device. Practitioner Summary: Frictional measures by the STM603 (SATRA Technology) were able to predict human slips under liquid contaminant conditions. Test parameters did have an influence on the measurements. An increased shoe-floor testing angle resulted in better slip predictions than test methods specified in the ASTM F2913 standard.

| S-EPMC7365591 | biostudies-literature

Mediolateral angular momentum changes in persons with amputation during perturbed walking.

Project description:Over 50% of individuals with lower limb amputation fall at least once each year. These individuals also exhibit reduced ability to effectively respond to challenges to frontal plane stability. The range of whole body angular momentum has been correlated with stability and fall risk. This study determined how lateral walking surface perturbations affected the regulation of whole body and individual leg angular momentum in able-bodied controls and individuals with unilateral transtibial amputation. Participants walked at fixed speed in a Computer Assisted Rehabilitation Environment with no perturbations and continuous, pseudo-random, mediolateral platform oscillations. Both the ranges and variability of angular momentum for both the whole body and both legs were significantly greater (p<0.001) during platform oscillations. There were no significant differences between groups in whole body angular momentum range or variability during unperturbed walking. The range of frontal plane angular momentum was significantly greater for those with amputation than for controls for all segments (p<0.05). For the whole body and intact leg, angular momentum ranges were greater for patients with amputation. However, for the prosthetic leg, angular momentum ranges were less for patients than controls. Patients with amputation were significantly more affected by the perturbations. Though patients with amputation were able to maintain similar patterns of whole body angular momentum during unperturbed walking, they were more highly destabilized by the walking surface perturbations. Individuals with transtibial amputation appear to predominantly use altered motion of the intact limb to maintain mediolateral stability.

| S-EPMC4408235 | biostudies-literature

The energetic effect of hip flexion and retraction in walking at different speeds: a modeling study.

Project description:In human walking, power for propulsion is generated primarily via ankle and hip muscles. The addition of a 'passive' hip spring to simple bipedal models appears more efficient than using only push-off impulse, at least, when hip spring associated energetic costs are not considered. Hip flexion and retraction torques, however, are not 'free', as they are produced by muscles demanding metabolic energy. Studies evaluating the inclusion of hip actuation costs, especially during the swing phase, and the hip actuation's energetic benefits are few and far between. It is also unknown whether these possible benefits/effects may depend on speed. We simulated a planar flat-feet model walking stably over a range of speeds. We asked whether the addition of independent hip flexion and retraction remains energetically beneficial when considering work-based metabolic cost of transport (MCOT) with different efficiencies of doing positive and negative work. We found asymmetric hip actuation can reduce the estimated MCOT relative to ankle actuation by up to 6%, but only at medium speeds. The corresponding optimal strategy is zero hip flexion and some hip retraction actuation. The reason for this reduced MCOT is that the decrease in collision loss is larger than the associated increase in hip negative work. This leads to a reduction in total positive mechanical work, which results in an overall lower MCOT. Our study shows how ankle actuation, hip flexion, and retraction actuation can be coordinated to reduce MCOT.

| S-EPMC9864190 | biostudies-literature

A multimodal dataset of human gait at different walking speeds established on injury-free adult participants.

Project description:Human motion capture is used in various fields to analyse, understand and reproduce the diversity of movements that are required during daily-life activities. The proposed dataset of human gait has been established on 50 adults healthy and injury-free for lower and upper extremities in the most recent six months, with no lower and upper extremity surgery in the last two years. Participants were asked to walk on a straight level walkway at 5 speeds during one unique session: 0-0.4 m.s-1, 0.4-0.8 m.s-1, 0.8-1.2 m.s-1, self-selected spontaneous and fast speeds. Three dimensional trajectories of 52 reflective markers spread over the whole body, 3D ground reaction forces and moment, and electromyographic signals were simultaneously recorded. For each participants, a minimum of 3 trials per condition have been made available in the dataset for a total of 1143 trials. This dataset could increase the sample size of similar datasets, lead to analyse the effect of walking speed on gait or conduct unusual analysis of gait thanks to the full body markerset used.

| S-EPMC6610108 | biostudies-literature

Negative friction coefficient in microscale graphite/mica layered heterojunctions.

Project description:The friction of a solid contact typically shows a positive dependence on normal load according to classic friction laws. A few exceptions were recently observed for nanoscale single-asperity contacts. Here, we report the experimental observation of negative friction coefficient in microscale monocrystalline heterojunctions at different temperatures. The results for the interface between graphite and muscovite mica heterojunction demonstrate a robust negative friction coefficient both in loading and unloading processes. Molecular dynamics simulations reveal that the underlying mechanism is a synergetic and nontrivial redistribution of water molecules at the interface, leading to larger density and more ordered structure of the confined subnanometer-thick water film. Our results are expected to be applicable to other hydrophilic van der Waals heterojunctions.

| S-EPMC7164938 | biostudies-literature

Prediction of coefficient of friction based on footwear outsole features.

Project description:Traction testing of footwear is expensive, which may create barriers for certain users to assess footwear. This study aimed to develop a statistical model that predicts available coefficient of friction (ACOF) under boundary lubrication conditions based on inexpensive measurements of footwear outsole features. Geometric and material hardness parameters were measured from fifty-eight footwear designs labeled as slip-resistant. A robotic friction measurement device was used to quantify ACOF with canola oil as the contaminant. Stepwise regression methods were used to develop models based on the outsole parameters and floor type to predict ACOF. The predictive ability of the regression models was tested using the k-fold cross-validation method. Results indicated that 87% of ACOF variation was explained by three shoe outsole parameters (tread surface area, heel shape, hardness) and floor type. This approach may provide an assessment tool for safety practitioners to assess footwear traction and improve workers' safety.

| S-EPMC7365588 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data