Dataset Information

Synthesis of renewable high-density fuel with isophorone.

ABSTRACT: 1,1,3-Trimethyl-5-(2,4,4-trimethylcyclohexyl)cyclohexane, a renewable high density fuel, was first produced in a high overall carbon yield (~70%) with isophorone which can be derived from hemicellulose. The synthetic route used this work contains three steps. In the first step, 3,3,5-trimethylcyclohexanone was synthesized by the selective hydrogenation of isophorone. Among the investigated catalysts, the Pd/C exhibited the highest activity and selectivity. Over this catalyst, a high carbon yield (99.0%) of 3,3,5-trimethylcyclohexanone was achieved under mild conditions (298?K, 2?MPa H₂, 1?h). In the second step, 3,5,5-trimethyl-2-(3,3,5-trimethylcyclohexylidene)cyclohexanone was produced in a high carbon yield (76.4%) by the NaOH catalyzed self-aldol condensation of 3,3,5-trimethylcyclohexanone which was carried out in a round bottom flask attached to the Dean-Stark apparatus. In the third step, the 3,5,5-trimethyl-2-(3,3,5-trimethylcyclohexylidene)cyclohexanone was hydrodeoxygenated under solvent-free conditions. High carbon yield (93.4%) of 1,1,3-trimethyl-5-(2,4,4-trimethylcyclohexyl)cyclohexane was obtained over the Ni/SiO₂ catalyst. The 1,1,3-trimethyl-5-(2,4,4-trimethylcyclohexyl)cyclohexane as obtained has a density of 0.858?g?mL^-1 and a freezing point of 222.2?K. As a potential application, it can be blended into conventional fuels (such as RP-1, RG-1, etc.) for rocket propulsion.

SUBMITTER: Wang W

PROVIDER: S-EPMC5522473 | biostudies-literature | 2017 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Synthesis of renewable high-density fuel with isophorone.

Wang Wei W Liu Yanting Y Li Ning N Li Guangyi G Wang Wentao W Wang Aiqin A Wang Xiaodong X Zhang Tao T

Scientific reports 20170721 1

1,1,3-Trimethyl-5-(2,4,4-trimethylcyclohexyl)cyclohexane, a renewable high density fuel, was first produced in a high overall carbon yield (~70%) with isophorone which can be derived from hemicellulose. The synthetic route used this work contains three steps. In the first step, 3,3,5-trimethylcyclohexanone was synthesized by the selective hydrogenation of isophorone. Among the investigated catalysts, the Pd/C exhibited the highest activity and selectivity. Over this catalyst, a high carbon yield ...[more]

PMID: 28733651

Similar Datasets

Project description:BackgroundIn an effort to ensure future energy security, reduce greenhouse gas emissions and create domestic jobs, the US has invested in technologies to develop sustainable biofuels and bioproducts from renewable carbon sources such as lignocellulosic biomass. Bio-derived jet fuel is of particular interest as aviation is less amenable to electrification compared to other modes of transportation and synthetic biology provides the ability to tailor fuel properties to enhance performance. Specific energy and energy density are important properties in determining the attractiveness of potential bio-derived jet fuels. For example, increased energy content can give the industry options such as longer range, higher load or reduced takeoff weight. Energy-dense sesquiterpenes have been identified as potential next-generation jet fuels that can be renewably produced from lignocellulosic biomass.ResultsWe developed a biomass deconstruction and conversion process that enabled the production of two tricyclic sesquiterpenes, epi-isozizaene and prespatane, from the woody biomass poplar using the versatile basidiomycete Rhodosporidium toruloides. We demonstrated terpene production at both bench and bioreactor scales, with prespatane titers reaching 1173.6 mg/L when grown in poplar hydrolysate in a 2 L bioreactor. Additionally, we examined the theoretical fuel properties of prespatane and epi-isozizaene in their hydrogenated states as blending options for jet fuel, and compared them to aviation fuel, Jet A.ConclusionOur findings indicate that prespatane and epi-isozizaene in their hydrogenated states would be attractive blending options in Jet A or other lower density renewable jet fuels as they would improve viscosity and increase their energy density. Saturated epi-isozizaene and saturated prespatane have energy densities that are 16.6 and 18.8% higher than Jet A, respectively. These results highlight the potential of R. toruloides as a production host for the sustainable and scalable production of bio-derived jet fuel blends, and this is the first report of prespatane as an alternative jet fuel.

Project description:BackgroundMicroalgae-based high-density fuels offer an efficient and environmental pathway towards decarbonization of the transport sector and could be produced as part of a globally distributed network without competing with food systems for arable land. Variations in climatic and economic conditions significantly impact the economic feasibility and productivity of such fuel systems, requiring harmonized technoeconomic assessments to identify important conditions required for commercial scale up.MethodsHere, our previously validated Techno-economic and Lifecycle Analysis (TELCA) platform was extended to provide a direct performance comparison of microalgae diesel production at 12 international locations with variable climatic and economic settings. For each location, historical weather data, and jurisdiction-specific policy and economic inputs were used to simulate algal productivity, evaporation rates, harvest regime, CapEx and OpEx, interest and tax under location-specific operational parameters optimized for Minimum Diesel Selling Price (MDSP, US$ L-1). The economic feasibility, production capacity and CO2-eq emissions of a defined 500 ha algae-based diesel production facility is reported for each.ResultsUnder a for-profit business model, 10 of the 12 locations achieved a minimum diesel selling price (MDSP) under US$ 1.85 L-1 / US$ 6.99 gal-1. At a fixed theoretical MDSP of US$ 2 L-1 (US$ 7.57 gal-1) these locations could achieve a profitable Internal Rate of Return (IRR) of 9.5-22.1%. Under a public utility model (0% profit, 0% tax) eight locations delivered cost-competitive renewable diesel at an MDSP of < US$ 1.24 L-1 (US$ 4.69 gal-1). The CO2-eq emissions of microalgae diesel were about one-third of fossil-based diesel.ConclusionsThe public utility approach could reduce the fuel price toward cost-competitiveness, providing a key step on the path to a profitable fully commercial renewable fuel industry by attracting the investment needed to advance technology and commercial biorefinery co-production options. Governments' adoption of such an approach could accelerate decarbonization, improve fuel security, and help support a local COVID-19 economic recovery. This study highlights the benefits and limitations of different factors at each location (e.g., climate, labour costs, policy, C-credits) in terms of the development of the technology-providing insights on how governments, investors and industry can drive the technology forward.

Dataset Information

Synthesis of renewable high-density fuel with isophorone.

Publications

Synthesis of renewable high-density fuel with isophorone.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets