Hydroxylated Fluorescent Dyes for Live-Cell Labeling: Synthesis, Spectra and Super-Resolution STED.
Ontology highlight
ABSTRACT:
SUBMITTER: Butkevich AN
PROVIDER: S-EPMC5599963 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Development of nanoparticles for super-resolution imaging (sriNPs) can greatly enrich the toolbox of robust optical probes for biological studies. Moreover, sriNPs enable us to monitor the behavior of engineered nanomaterials in complex biological environments with high spatial resolution, which is important for advancing our understanding of nano-bio interactions. Up to now, reports on sriNPs have been scarce. In this work, we report a facile strategy to prepare protein-based fluorescent NPs that can be utilized as probes in super-resolution microscopy. The method is simple and straightforward, and easily extendible to other types of fluorophores. By using Atto647N-transferrin NPs as an example, we have achieved a roughly four-fold resolution improvement by using STED nanoscopy. These protein-based sriNPs possess excellent biocompatibility, good colloidal stability and photostability, making them attractive candidates for biological studies. Moreover, STED nanoscopy enables the precise imaging of NP structures in living cells, and revealed the co-existence of multiple NPs within one endosomal vesicle.
| S-EPMC5369336 | biostudies-literature
Project description:Genetic code expansion (GCE) technology allows the specific incorporation of functionalized noncanonical amino acids (ncAAs) into proteins. Here, we investigated the Diels-Alder reaction between trans-cyclooct-2-ene (TCO)-modified ncAAs, and 22 known and novel 1,2,4,5-tetrazine-dye conjugates spanning the entire visible wavelength range. A hallmark of this reaction is its fluorogenicity - the tetrazine moiety can elicit substantial quenching of the dye. We discovered that photoinduced electron transfer (PET) from the excited dye to tetrazine is the main quenching mechanism in red-absorbing oxazine and rhodamine derivatives. Upon reaction with dienophiles quenching interactions are reduced resulting in a considerable increase in fluorescence intensity. Efficient and specific labeling of all tetrazine-dyes investigated permits super-resolution microscopy with high signal-to-noise ratio even at the single-molecule level. The different cell permeability of tetrazine-dyes can be used advantageously for specific intra- and extracellular labeling of proteins and highly sensitive fluorescence imaging experiments in fixed and living cells.
| S-EPMC6642216 | biostudies-literature
Project description:Lignocellulosic biomass is a complex network of polymers making up the cell walls of plants. It represents a feedstock of sustainable resources to be converted into fuels, chemicals, and materials. Because of its complex architecture, lignocellulose is a recalcitrant material that requires some pretreatments and several types of catalysts to be transformed efficiently. Gaining more knowledge in the architecture of plant cell walls is therefore important to understand and optimize transformation processes. For the first time, super-resolution imaging of poplar wood samples has been performed using the Stimulated Emission Depletion (STED) technique. In comparison to standard confocal images, STED reveals new details in cell wall structure, allowing the identification of secondary walls and middle lamella with fine details, while keeping open the possibility to perform topochemistry by the use of relevant fluorescent nano-probes. In particular, the deconvolution of STED images increases the signal-to-noise ratio so that images become very well defined. The obtained results show that the STED super-resolution technique can be easily implemented by using cheap commercial fluorescent rhodamine-PEG nano-probes which outline the architecture of plant cell walls due to their interaction with lignin. Moreover, the sample preparation only requires easily-prepared plant sections of a few tens of micrometers, in addition to an easily-implemented post-treatment of images. Overall, the STED super-resolution technique in combination with a variety of nano-probes can provide a new vision of plant cell wall imaging by filling in the gap between classical photon microscopy and electron microscopy.
| S-EPMC5874600 | biostudies-literature
Project description:A range of bright and photostable rhodamines and carbopyronines with absorption maxima in the range of λ=500-630 nm were prepared, and enabled the specific labeling of cytoskeletal filaments using HaloTag technology followed by staining with 1 μm solutions of the dye-ligand conjugates. The synthesis, photophysical parameters, fluorogenic behavior, and structure-property relationships of the new dyes are discussed. Light microscopy with stimulated emission depletion (STED) provided one- and two-color images of living cells with an optical resolution of 40-60 nm.
| S-EPMC4770443 | biostudies-literature
Project description:The nanometer thickness of filaments and the dynamic behavior of actin-a protein playing a crucial role in cellular function and motility-make it attractive for observation with super-resolution optical microscopy. We developed the solution-phase synthesis of des-bromo-des-methyl-jasplakinolide-lysine, used as the "recognition unit" (ligand) for F-actin in living cells. The first amino acid-Fmoc-O-TIPS-?-tyrosine-was prepared in 78% yield (two steps in one pot). The new solution-phase synthesis involves 2-phenylisopropyl protection of the carboxyl group and does not require excesses of commercially unavailable amino acids. The overall yield of the target intermediate obtained in nine steps is about 8%. The 2-phenylisopropyl group can be cleaved from carboxyl with 2-3% (v/v) of TFA in acetonitrile (0-10 °C), without affecting TIPS protection of the phenolic hydroxyl in ?-tyrosine and N-Boc protection in lysine. Des-bromo-des-methyl-jasplakinolide-lysine was coupled with red-emitting fluorescent dyes 580CP and 610CP (via 6-aminohexanoate linker). Actin in living cells was labeled with 580CP and 610CP probes, and the optical resolution measured as full width at half-maximum of line profiles across actin fibers was found to be 300-400 nm and 100 nm under confocal and STED conditions, respectively. The solution-phase synthesis of des-bromo-des-methyl-jasplakinolide-lysine opens a way to better fluorescent probe perspective for actin imaging.
| S-EPMC7281785 | biostudies-literature
Project description:The simultaneous measurement of gene expression for thousands of genes in a single analysis by the microarray technology allows researchers to describe transcriptomes in various samples of interest. Problems with variation in data quality derived from microarray experiments are well known and might result from poor RNA quality, background problems, or sub optimal signal strength. To assess variation due to the fluorescent dye chosen, three different dye pairs were tested for labelling of cDNA in gene expression analysis experiments on a porcine immune focused oligonucleotide microarray (POM3). This in-house oligonucleotide microarray allowed a direct comparison of background fluorescence, Median signal intensities, numbers of spots detected, and resistance to photobleaching between different dye pairs. We tested Alexa Flour 546/647, Cy3/Cy5 as well as Oyster 550/650 all from Genisphere Inc., Hatfield, PA, USA. Keywords: Comparison of fluorescent dyes
2009-01-16 | GSE4855 | GEO
Project description:The simultaneous measurement of gene expression for thousands of genes in a single analysis by the microarray technology allows researchers to describe transcriptomes in various samples of interest. Problems with variation in data quality derived from microarray experiments are well known and might result from poor RNA quality, background problems, or sub optimal signal strength. To assess variation due to the fluorescent dye chosen, three different dye pairs were tested for labelling of cDNA in gene expression analysis experiments on a porcine immune focused oligonucleotide microarray (POM3). This in-house oligonucleotide microarray allowed a direct comparison of background fluorescence, Median signal intensities, numbers of spots detected, and resistance to photobleaching between different dye pairs. We tested Alexa Flour 546/647, Cy3/Cy5 as well as Oyster 550/650 all from Genisphere Inc., Hatfield, PA, USA. Keywords: Comparison of fluorescent dyes Each dye pairs were hybridized on two slides. The same two samples were compared on all the slides used in the present study. The liver sample from a healthy animal was labeled with the high wavelength dyes (Oyster 650/Alexa 647/Cy5) and the liver sample from the sick animal was labeled with the low wavelength dyes (Oyster 550/Alexa 546/Cy3). Each slide was scanned 3 times, immediately after hybridization (first round), after 1 month of storage in darkness and after 24 hours on the bench (12 hours of daylight and 12 hours of artificial light). Total RNA from the infected and control liver samples were extracted using RNeasy midi kit (Qiagen, Denmark) and DNase treated using RNase-Free DNase Set (Qiagen). 3DNATM Array 900 expression array detection kits (Genisphere Inc.) were used for the labeling and cDNA synthesis reaction of the RNA in the present study. Three different pairs of fluorescent dyes Oyster 550/650 (Genisphere Inc.), Alexa 546/647 (Genisphere Inc.), and Cy3/Cy5 (Genisphere Inc.) were used in separate labeling reactions. Labeling was done according to the manufacturers protocol for large-scale cDNA synthesis. For the cDNA synthesis 9.2µg total RNA from each liver sample was used and mixed with 20U AmpliQ RTenzyme and 10x first strand buffer (Bie og Berntsen, Rødovre, Denmark). Hybridization and washing were performed according to the manufacturers instructions (Genisphere) using Corning hybridization chambers. For one cDNA hybridization reaction; 6.5µl cDNA from each synthesis, 0.5µl Salmon sperm (10µg/µl) and 13.5µl 2 x Formamide-Based Hybridization Buffer (3DNA Array 900, Genisphere) was used. A total hybridization mix of 29µl was applied under a 22I x 25 mm LifterSlip (Erie Scientific, Portsmouth, NH, USA) carefully avoiding air bubbles. Slides were incubated at 44oC in a water bath over night. Wash buffer 1 (3DNA Array 900, Genisphere) was preheated to 44oC for the post cDNA hybridization wash. For two 3DNA hybridization reaction mixes; 2.5µl of each Capture reagent and 26µl SDS-Based hybridization buffer was mixed to a final volume of 52µl. 26µl 3DNA hybridization mix was applied to each slide, and incubated in darkness in a water bath at 50oC for 4 hours. Wash buffer 1 was preheated to 60oC for the post 3DNA hybridization wash. Slides were scanned on a CCD ArrayWoRxe auto (Applied Precision, Issaquah, WA, USA) using different exposure times (0.3 for 595 nm and 1.2 for 685 nm).
2010-05-06 | E-GEOD-4855 | biostudies-arrayexpress
Project description:Methods that enable the super-resolution imaging of intracellular proteins in live bacterial cells provide powerful tools for the study of prokaryotic cell biology. Photoswitchable organic dyes exhibit many of the photophysical properties needed for super-resolution imaging, including high brightness, photostability, and photon output, but most such dyes require organisms to be fixed and permeabilized if intracellular targets are to be labeled. We recently reported a general strategy for the chemoenzymatic labeling of bacterial proteins with azide-bearing fatty acids in live cells using the eukaryotic enzyme N-myristoyltransferase. Here we demonstrate the labeling of proteins in live Escherichia coli using cell-permeant bicyclononyne-functionalized photoswitchable rhodamine spirolactams. Single-molecule fluorescence measurements on model rhodamine spirolactam salts show that these dyes emit hundreds of photons per switching event. Super-resolution imaging was performed on bacterial chemotaxis proteins Tar and CheA and cell division proteins FtsZ and FtsA. High-resolution imaging of Tar revealed a helical pattern; imaging of FtsZ yielded banded patterns dispersed throughout the cell. The precision of radial and axial localization in reconstructed images approaches 15 and 30 nm, respectively. The simplicity of the method, which does not require redox imaging buffers, should make this approach broadly useful for imaging intracellular bacterial proteins in live cells with nanometer resolution.
| S-EPMC6935894 | biostudies-literature
Project description:Precise imaging of the cell surface of fluorescently labeled bacteria requires super-resolution methods because the size-scale of these cells is on the order of the diffraction limit. In this work, we present a photocontrollable small-molecule rhodamine spirolactam emitter suitable for non-toxic and specific labeling of the outer surface of cells for three-dimensional (3D) super-resolution (SR) imaging. Conventional rhodamine spirolactams photoswitch to the emitting form with UV light; however, these wavelengths can damage cells. We extended photoswitching to visible wavelengths >400 nm by iterative synthesis and spectroscopic characterization to optimize the substitution on the spirolactam. Further, an N-hydroxysuccinimide-functionalized derivative enabled covalent labeling of amines on the surface of live Caulobacter crescentus cells. Resulting 3D SR reconstructions of the labeled cell surface reveal uniform and specific sampling with thousands of localizations per cell and excellent localization precision in x, y, and z. The distribution of cell stalk lengths (a sub-diffraction-sized cellular structure) was quantified for a mixed population of cells. Pulse-chase experiments identified sites of cell surface growth. Covalent labeling with the optimized rhodamine spirolactam label provides a general strategy to study the surfaces of living cells with high specificity and resolution down to 10-20 nm.
| S-EPMC4195381 | biostudies-literature
Project description:We introduce UnaG as a green-to-dark photoswitching fluorescent protein capable of high-quality super-resolution imaging with photon numbers equivalent to the brightest photoswitchable red protein. UnaG only fluoresces upon binding of a fluorogenic metabolite, bilirubin, enabling UV-free reversible photoswitching with easily controllable kinetics and low background under Epi illumination. The on- and off-switching rates are controlled by the concentration of the ligand and the excitation light intensity, respectively, where the dissolved oxygen also promotes the off-switching. The photo-oxidation reaction mechanism of bilirubin in UnaG suggests that the lack of ligand-protein covalent bond allows the oxidized ligand to detach from the protein, emptying the binding cavity for rebinding to a fresh ligand molecule. We demonstrate super-resolution single-molecule localization imaging of various subcellular structures genetically encoded with UnaG, which enables facile labeling and simultaneous multicolor imaging of live cells. UnaG has the promise of becoming a default protein for high-performance super-resolution imaging.
| S-EPMC6959352 | biostudies-literature