Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Conversion of invisible metal-organic frameworks to luminescent perovskite nanocrystals for confidential information encryption and decryption.

ABSTRACT: Traditional smart fluorescent materials, which have been attracting increasing interest for security protection, are usually visible under either ambient or UV light, making them adverse to the potential application of confidential information protection. Herein, we report an approach to realize confidential information protection and storage based on the conversion of lead-based metal-organic frameworks (MOFs) to luminescent perovskite nanocrystals (NCs). Owing to the invisible and controlled printable characteristics of lead-based MOFs, confidential information can be recorded and encrypted by MOF patterns, which cannot be read through common decryption methods. Through our conversion strategy, highly luminescent perovskite NCs can be formed quickly and simply by using a halide salt trigger that reacts with the MOF, thus promoting effective information decryption. Finally, through polar solvents impregnation and halide salt conversion, the luminescence of the perovskite NCs can be quenched and recovered, leading to reversible on/off switching of the luminescence signal for multiple information encryption and decryption processes.

SUBMITTER: Zhang C

PROVIDER: S-EPMC5663915 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Photoresponsive Luminescent Polymeric Hydrogels for Reversible Information Encryption and Decryption.

Project description:Conventional luminescent information is usually visible under either ambient or UV light, hampering their potential application in smart confidential information protection. In order to address this challenge, herein, light-triggered luminescence ON-OFF switchable hybrid hydrogels are successfully constructed through in situ copolymerization of acrylamide, lanthanide complex, and diarylethene photochromic unit. The open-close behavior of the diarylethene ring in the polymer could be controlled by UV and visible light irradiation, where the close form of the ring features fluorescence resonance energy transfer with the lanthanide complex. The hydrogel-based blocks with tunable emission colors are then employed to construct 3D information codes, which can be read out under a 254 nm UV lamp. The exposure to 300 nm UV light leads to the luminescence quenching of the hydrogels, thus erasing the encoded information. Under visible light (>450 nm) irradiation, the luminescence is recovered to make the confidential information readable again. Thus, by simply alternating the exposure to UV and visible lights, the luminescence signals could become invisible and visible reversibly, allowing for reversible multiple information encryption and decryption.

| S-EPMC6839628 | biostudies-literature

Ultralong room temperature phosphorescence from amorphous organic materials toward confidential information encryption and decryption.

Project description:Ultralong room temperature phosphorescence (URTP) emitted from pure amorphous organic molecules is very rare. Although a few crystalline organic molecules could realize URTP with long lifetimes (>100 ms), practical applications of these crystalline organic phosphors are still challenging because the formation and maintenance of high-quality crystals are very difficult and complicated. Herein, we present a rational design for minimizing the vibrational dissipation of pure amorphous organic molecules to achieve URTP. By using this strategy, a series of URTP films with long lifetimes and high phosphorescent quantum yields (up to 0.75 s and 11.23%, respectively) were obtained from amorphous organic phosphors without visible fluorescence and phosphorescence under ambient conditions. On the basis of the unique features of URTP films, a new green screen printing technology without using any ink was developed toward confidential information encryption and decryption. This work presents a breakthrough strategy in applying amorphous organic materials for URTP.

| S-EPMC5935477 | biostudies-literature

Doped Halide Perovskite Nanocrystals for Reabsorption-Free Luminescent Solar Concentrators.

Project description:Halide perovskite nanocrystals (NCs) are promising solution-processed emitters for low-cost optoelectronics and photonics. Doping adds a degree of freedom for their design and enables us to fully decouple their absorption and emission functions. This is paramount for luminescent solar concentrators (LSCs) that enable fabrication of electrode-less solar windows for building-integrated photovoltaic applications. Here, we demonstrate the suitability of manganese-doped CsPbCl3 NCs as reabsorption-free emitters for large-area LSCs. Light propagation measurements and Monte Carlo simulations indicate that the dopant emission is unaffected by reabsorption. Nanocomposite LSCs were fabricated via mass copolymerization of acrylate monomers, ensuring thermal and mechanical stability and optimal compatibility of the NCs, with fully preserved emission efficiency. As a result, perovskite LSCs behave closely to ideal devices, in which all portions of the illuminated area contribute equally to the total optical power. These results demonstrate the potential of doped perovskite NCs for LSCs, as well as for other photonic technologies relying on low-attenuation long-range optical wave guiding.

| S-EPMC6559125 | biostudies-literature

An encryption-decryption framework to validating single-particle imaging.

Project description:We propose an encryption-decryption framework for validating diffraction intensity volumes reconstructed using single-particle imaging (SPI) with X-ray free-electron lasers (XFELs) when the ground truth volume is absent. This conceptual framework exploits each reconstructed volumes' ability to decipher latent variables (e.g. orientations) of unseen sentinel diffraction patterns. Using this framework, we quantify novel measures of orientation disconcurrence, inconsistency, and disagreement between the decryptions by two independently reconstructed volumes. We also study how these measures can be used to define data sufficiency and its relation to spatial resolution, and the practical consequences of focusing XFEL pulses to smaller foci. This conceptual framework overcomes critical ambiguities in using Fourier Shell Correlation (FSC) as a validation measure for SPI. Finally, we show how this encryption-decryption framework naturally leads to an information-theoretic reformulation of the resolving power of XFEL-SPI, which we hope will lead to principled frameworks for experiment and instrument design.

| S-EPMC7806625 | biostudies-literature

Mn2+/Yb3+ Codoped CsPbCl3 Perovskite Nanocrystals with Triple?Wavelength Emission for Luminescent Solar Concentrators

Project description:Abstract Doping metal ions into lead halide perovskite nanocrystals (NCs) has attracted great attention over the past few years due to the emergence of novel properties relevant to optoelectronic applications. Here, the synthesis of Mn2+/Yb3+ codoped CsPbCl3 NCs through a hot?injection technique is reported. The resulting NCs show a unique triple?wavelength emission covering ultraviolet/blue, visible, and near?infrared regions. By optimizing the dopant concentrations, the total photoluminescence quantum yield (PL QY) of the codoped NCs can reach ?125.3% due to quantum cutting effects. Mechanism studies reveal the efficient energy transfer processes from host NCs to Mn2+ and Yb3+ dopant ions, as well as a possible inter?dopant energy transfer from Mn2+ to Yb3+ ion centers. Owing to the high PL QYs and minimal reabsorption loss, the codoped perovskite NCs are demonstrated to be used as efficient emitters in luminescent solar concentrators, with greatly enhanced external optical efficiency compared to that of using solely Mn2+ doped CsPbCl3 NCs. This study presents a new model system for enriching doping chemistry studies and future applications of perovskite NCs. Mn2+/Yb3+ codoped CsPbCl3 perovskite nanocrystals are synthesized with a unique triple?wavelength emission covering the ultraviolet/blue, visible, and near?infrared spectral regions. Due to high photoluminescence quantum yields and minimal reabsorption losses, the codoped nanocrystals can be used as efficient emitters in large?area luminescent solar concentrators with superior light?concentrating performance.

| S-EPMC7509694 | biostudies-literature

Low-Cost Synthesis of Highly Luminescent Colloidal Lead Halide Perovskite Nanocrystals by Wet Ball Milling.

Project description:Lead halide perovskites of APbX3 type [A = Cs, formamidinium (FA), methylammonium; X = Br, I] in the form of ligand-capped colloidal nanocrystals (NCs) are widely studied as versatile photonic sources. FAPbBr3 and CsPbBr3 NCs have become promising as spectrally narrow green primary emitters in backlighting of liquid-crystal displays (peak at 520-530 nm, full width at half-maximum of 22-30 nm). Herein, we report that wet ball milling of bulk APbBr3 (A = Cs, FA) mixed with solvents and capping ligands yields green luminescent colloidal NCs with a high overall reaction yield and optoelectronic quality on par with that of NCs of the same composition obtained by hot-injection method. We emphasize the superiority of oleylammonium bromide as a capping ligand used for this procedure over the standard oleic acid and oleylamine. We also show a mechanically induced anion-exchange reaction for the formation of orange-emissive CsPb(Br/I)3 NCs.

| S-EPMC5999230 | biostudies-literature

Harnessing Defect-Tolerance at the Nanoscale: Highly Luminescent Lead Halide Perovskite Nanocrystals in Mesoporous Silica Matrixes.

Project description:Colloidal lead halide perovskite nanocrystals (NCs) have recently emerged as a novel class of bright emitters with pure colors spanning the entire visible spectral range. Contrary to conventional quantum dots, such as CdSe and InP NCs, perovskite NCs feature unusual, defect-tolerant photophysics. Specifically, surface dangling bonds and intrinsic point defects such as vacancies do not form midgap states, known to trap carriers and thereby quench photoluminescence (PL). Accordingly, perovskite NCs need not be electronically surface-passivated (with, for instance, ligands and wider-gap materials) and do not noticeably suffer from photo-oxidation. Novel opportunities for their preparation therefore can be envisaged. Herein, we show that the infiltration of perovskite precursor solutions into the pores of mesoporous silica, followed by drying, leads to the template-assisted formation of perovskite NCs. The most striking outcome of this simple methodology is very bright PL with quantum efficiencies exceeding 50%. This facile strategy can be applied to a large variety of perovskite compounds, hybrid and fully inorganic, with the general formula APbX3, where A is cesium (Cs), methylammonium (MA), or formamidinium (FA), and X is Cl, Br, I or a mixture thereof. The luminescent properties of the resulting templated NCs can be tuned by both quantum size effects as well as composition. Also exhibiting intrinsic haze due to scattering within the composite, such materials may find applications as replacements for conventional phosphors in liquid-crystal television display technologies and in related luminescence down-conversion-based devices.

| S-EPMC5799875 | biostudies-literature

Luminescent Intermediates and Humidity-Dependent Room-Temperature Conversion of the MAPbI<sub>3</sub> Perovskite Precursor.

Project description:Preparation of metal-halide perovskites under room temperature attracts attention because of energy saving by removing thermal annealing. Room-temperature transformation of spin-cast wet films consisting of methylammonium (MA) iodide, PbI2, and dimethylformamide toward solid MAPbI3 perovskite proceeds via several intermediate crystalline states and is strongly dependent on ambient humidity. Light transmission and photoluminescence (PL) microscopy and spectroscopy were used to monitor the growth of crystals and transformation of their properties in time under nitrogen atmosphere at room temperature. Under low humidity, a highly luminescent intermediate phase with low absorption in the visible range appears, with the PL spectra composed of several bands in the range from 600 to 760 nm. We assign these bands to low-dimensional (nanocrystals and two-dimensional inclusions) MAPbI3 intermediates, where the exciton confinement shifts the spectrum to higher energies in comparison with the bulk MAPbI3. The intermediate levels of ambient humidity (10-50%) appear to catalyze the conversion of the intermediate phase to MAPbI3. At a high ambient humidity (>80%), the initially formed MAPbI3 is quickly transformed to the transparent hydrate phase of MAPbI3. The role of ambient water catalyzing the material transformation by competing for Pb coordination with the solvent molecules is discussed.

| S-EPMC6644872 | biostudies-literature

Web-browser encryption of personal health information.

Project description:BackgroundElectronic health records provide access to an unprecedented amount of clinical data for research that can accelerate the development of effective medical practices. However it is important to protect patient confidentiality, as many medical conditions are stigmatized and disclosure could result in personal and/or financial loss.ResultsWe describe a system for remote data entry that allows the data that would identify the patient to be encrypted in the web browser of the person entering the data. These data cannot be decrypted on the server by the staff at the data center but can be decrypted by the person entering the data or their delegate. We developed this system to solve a problem that arose in the context of clinical research, but it is applicable in a range of situations where sensitive information is stored and updated in a database and it is necessary to ensure that it cannot be viewed by any except those intentionally given access.ConclusionBy developing this system, we are able to centralize the collection of some patient data while minimizing the risk that protected health information be made available to study personnel who are not authorized to use it.

| S-EPMC3276430 | biostudies-literature

Luminescent manganese-doped CsPbCl3 perovskite quantum dots.

Project description:Nanocrystalline cesium lead halide perovskites (CsPbX3, X?=?Cl, Br, and I) form an exciting new class of semiconductor materials showing quantum confinement. The emission color can be tuned over the full visible spectral region making them promising for light?emitting applications. Further control over the optical and magnetic properties of quantum dots (QDs) can be achieved through doping of transition metal (TM) ions such as Mn2+ or Co2+. Here we demonstrate how, following QD synthesis in the presence of a Mn?precursor, dropwise addition of silicon tetrachloride (SiCl4) to the QDs in toluene results in the formation of Mn?doped CsPbCl3 QDs showing bright orange Mn2+ emission around 600?nm. Evidence for successful doping is provided by excitation spectra of the Mn2+ emission, with all features of the CsPbCl3 QD absorption spectrum and a decrease of the 410?nm excitonic emission life time with increasing Mn?concentration, giving evidence for enhanced exciton to Mn2+ energy transfer. As a doping mechanism we propose a combination of surface etching and reconstruction and diffusion doping. The presently reported approach provides a promising avenue for doping TM ions into perovskites QDs enabling a wider control over optical and magnetic properties for this new class of QDs.

| S-EPMC5388844 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data