Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Behavior of Weak Polyelectrolyte Brushes in Mixed Salt Solutions.

ABSTRACT: Hydrophilic and hydrophobic weak polybasic brushes immersed in aqueous solutions of mixed salt counterions are considered using a mean-field numerical self-consistent field approach. On top of the solvent quality of the polymer, the counterion-solvent interactions are accounted for by implementing Flory-Huggins interaction parameters. We show that ion specificity within the brush can bring about large changes in conformation. It is found that the collapse transition of hydrophobic, weak polyelectrolyte brushes features an intermediate two-phase state wherein a subset of chains are collapsed in a dense layer at the substrate, while the remainder of chains are well-solvated and strongly stretched away from the it. Besides pH and ionic strength, solvent quality of counterions and the composition of ions in the solvent are important control parameters for the behavior of polyelectrolyte brushes. Increasingly hydrophobic counterions penetrate deeper within the brush and stabilize the collapsed region, while hydrophilic counterions do the opposite.

SUBMITTER: Willott JD

PROVIDER: S-EPMC5814957 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Combined Experimental and Theoretical Study of Weak Polyelectrolyte Brushes in Salt Mixtures.

Project description:The swelling behavior of a hydrophobic poly(2diisopropylamino)ethyl methacrylate (PDPA) brush immersed in aqueous solutions of single and mixed salts has been investigated using ellipsometry and numerical self-consistent field (nSCF) theory. As a function of solution ionic strength, the osmotic and salted brush regimes of weak polyelectrolyte brushes as well as substantial specific anion effects in the presence of K+ salts of Cl-, NO3-, and SCN- are found. For solutions containing mixtures of NO3- and Cl-, the brush swelling is the same as one would expect on the basis of the concentration-weighted average of the brush behavior in the single salt solutions. However, in mixtures of SCN- and Cl-, the swelling response is more complicated and substantial divergence from ideal behavior is observed. Mean-field theory shows excellent qualitative agreement with the ellipsometry findings. nSCF reveals that for the SCN-/Cl- cases the swelling behavior of the PDPA brush most likely arises from the predominant localization of the weakly hydrated SCN- within the brush compared to the more strongly hydrated Cl-.

| S-EPMC6407915 | biostudies-literature

Large Changes in Protonation of Weak Polyelectrolyte Brushes with Salt Concentration-Implications for Protein Immobilization.

Project description:We report for the first time that the protonation behavior of weak polyelectrolyte brushes depends very strongly on ionic strength. The pKa changes by one pH step per order of magnitude in salt concentration. For low salt concentrations (∼1 mM), a very high pH is required to deprotonate a polyacidic brush and a very low pH is required to protonate a polybasic brush. This has major consequences for interactions with other macromolecules, as the brushes are actually almost fully neutral when believed to be charged. We propose that many previous studies on electrostatic interactions between polyelectrolytes and proteins have, in fact, looked at other types of intermolecular forces, in particular, hydrophobic interactions and hydrogen bonds.

| S-EPMC7467743 | biostudies-literature

Charging behavior of single-stranded DNA polyelectrolyte brushes.

Project description:DNA monolayers are widely used in fundamental and applied genomics and are versatile experimental models for elucidating the behavior of charged polymers at interfaces. The physical behavior of these systems is to a large extent governed by their internal ionic microenvironment, which is investigated here for layers of end-tethered, single-stranded DNA oligonucleotides (DNA brushes). Retention of counterions by the DNA brush manifests as lowered susceptibility of the interfacial capacitance to external salt conditions. A physical model based on concepts adapted from polymer science was used to further elucidate the connection between monolayer organization and its charging behavior. The data indicate a reorganization of the monolayer with changes in ionic strength and strand coverage that is consistent with that expected for a polyelectrolyte brush. A method for electrochemical quantification of strand coverage, based on shift of reduction potential for redox counterions associated with the DNA monolayer, is also described. These results provide guidance for development of label-free electrochemical diagnostics employing DNA monolayers and formulate a description of monolayer behavior within a polymer science framework.

| S-EPMC2527127 | biostudies-literature

Lubrication by Polyelectrolyte Brushes.

Project description:We develop a scaling model relating the friction forces between two polyelectrolyte brushes sliding over each other to the separation between grafted surfaces, number of monomers and charges per chain, grafting density of chains, and solvent quality. We demonstrate that the lateral force between brushes increases upon compression, but to a lesser extent than the normal force. The shear stress at larger separations is due to solvent slip layer friction. The thickness of this slip layer sharply decreases at distances on the order of undeformed brush thickness. The corresponding effective viscosity of the layer sharply increases from the solvent viscosity to a much higher value, but this increase is smaller than the jump of the normal force resulting in the drop of the friction coefficient. At stronger compression we predict the second sharp increase of the shear stress corresponding to interpenetration of the chains from the opposite brushes. In this regime the velocity-dependent friction coefficient between two partially interpenetrating polyelectrolyte brushes does not depend on the distance between substrates because both normal and shear forces are reciprocally proportional to the plate separation. Although lateral forces between polyelectrolyte brushes are larger than between bare surfaces, the enhancement of normal forces between opposing polyelectrolyte brushes with respect to normal forces between bare charged surfaces is much stronger resulting in lower friction coefficient. The model quantitatively demonstrates how polyelectrolyte brushes provide more effective lubrication than bare charged surfaces or neutral brushes.

| S-EPMC4146326 | biostudies-other

Effects of chain stiffness and salt concentration on responses of polyelectrolyte brushes under external electric field.

Project description:We report a molecular dynamics study on non-equilibrium dynamics of polyelectrolyte brushes under external electric fields. In this work, the effects of chain stiffness and salt concentration on static and dynamic responses of the brushes are addressed in detail. Our simulations indicate that varying these parameters induce rich electro-responsive behavior of the brushes. The increase of salt concentration results in the enhancement of an opposite electric field formed by non-equilibrium distribution of cations and anions, which resists stretching or shrinkage of grafted chains. At strong positive electric fields, the flexible brushes are more sensitive to the change of salt concentration. When reversing the electric field, the stiff brushes undergo a conformational transition from collapse to complete stretching. At high salt concentrations, dynamic responsive magnitude of the brush thickness to added electric field is strongly reduced. It was found that the fall time for the stiff brush becomes much shorter than that for the flexible brush. Additionally, increasing ion concentration leads to an excess extension or shrinkage of flexible brushes. For strongly stiff brushes, such phenomenon occurs in the presence or absence of salt.

| S-EPMC3368832 | biostudies-other

Water Recovery from Bioreactor Mixed Liquors Using Forward Osmosis with Polyelectrolyte Draw Solutions.

Project description:This paper reports on the use of forward osmosis (FO) with polyelectrolyte draw solutions to recover water from bioreactor mixed liquors. The work was motivated by the need for new regenerative water purification technologies to enable long-duration space missions. Osmotic membrane bioreactors may be an option for water and nutrient recovery in space if they can attain high water flux and reverse solute flux selectivity (RSFS), which quantifies the mass of permeated water per mass of draw solute that has diffused from the draw solution into a bioreactor. Water flux was measured in a direct flow system using wastewater from a municipal wastewater treatment plant and draw solutions prepared with two polyelectrolytes at different concentrations. The direct flow tests displayed a high initial flux (>10 L/m2/h) that decreased rapidly as solids accumulated on the feed side of the membrane. A test with deionized water as the feed revealed a small mass of polyelectrolyte crossover from the draw solution to the feed, yielding an RSFS of 80. Crossflow filtration experiments demonstrated that steady state flux above 2 L/m2·h could be maintained for 70 h following an initial flux decline due to the formation of a foulant cake layer. This study established that FO could be feasible for regenerative water purification from bioreactors. By utilizing a polyelectrolyte draw solute with high RSFS, we expect to overcome the need for draw solute replenishment. This would be a major step towards sustainable operation in long-duration space missions.

| S-EPMC8779258 | biostudies-literature

Communication: Counter-ion solvation and anomalous low-angle scattering in salt-free polyelectrolyte solutions.

Project description:We investigate the influence of counter-ion solvation on the homogeneity of salt-free polyelectrolyte solutions based on a coarse-grained model that includes an explicit solvent. We show that the solvation of the counter-ions can cause a transformation between a nearly homogeneous to a non-uniform polymer solution, in which there is both a chain clustering and the formation of large charge-free domains, i.e., "voids." The emergence of these heterogeneous structures induced by counter-ion solvation is accompanied by the localization and formation of counter-ion rich domains that are symptomatic of emergent effective long-range attractive interchain interactions.

| S-EPMC5839105 | biostudies-literature

Tuning smart microgel swelling and responsive behavior through strong and weak polyelectrolyte pair assembly.

Project description:The layer-by-layer (LbL) assembly of polyelectrolyte pairs on temperature and pH-sensitive cross-linked poly(N-isopropylacrylamide)-co-(methacrylic acid), poly(NIPAAm-co-MAA), microgels enabled a fine-tuning of the gel swelling and responsive behavior according to the mobility of the assembled polyelectrolyte (PE) pair and the composition of the outermost layer. Microbeads with well-defined morphology were initially prepared by synthesis in supercritical carbon dioxide. Upon LbL assembly of polyelectrolytes, interactions between the multilayers and the soft porous microgel led to differences in swelling and thermoresponsive behavior. For the weak PE pairs, namely poly(L-lysine)/poly(L-glutamic acid) and poly(allylamine hydrochloride)/poly(acrylic acid), polycation-terminated microgels were less swollen and more thermoresponsive than native microgel, whereas polyanion-terminated microgels were more swollen and not significantly responsive to temperature, in a quasi-reversible process with consecutive PE assembly. For the strong PE pair, poly(diallyldimethylammonium chloride)/poly(sodium styrene sulfonate), the differences among polycation and polyanion-terminated microgels are not sustained after the first PE bilayer due to extensive ionic cross-linking between the polyelectrolytes. The tendencies across the explored systems became less noteworthy in solutions with larger ionic strength due to overall charge shielding of the polyelectrolytes and microgel. ATR FT-IR studies correlated the swelling and responsive behavior after LbL assembly on the microgels with the extent of H-bonding and alternating charge distribution within the gel. Thus, the proposed LbL strategy may be a simple and flexible way to engineer smart microgels in terms of size, surface chemistry, overall charge and permeability.

| S-EPMC3412153 | biostudies-literature

Multivalent ions induce lateral structural inhomogeneities in polyelectrolyte brushes.

Project description:Subtle details about a polyelectrolyte's surrounding environment can dictate its structural features and potential applications. Atomic force microscopy (AFM), surface forces apparatus (SFA) measurements, and coarse-grained molecular dynamics simulations are combined to study the structure of planar polyelectrolyte brushes [poly(styrenesulfonate), PSS] in a variety of solvent conditions. More specifically, AFM images provide a first direct visualization of lateral inhomogeneities on the surface of polyelectrolyte brushes collapsed in solutions containing trivalent counterions. These images are interpreted in the context of a coarse-grained molecular model and are corroborated by accompanying interaction force measurements with the SFA. Our findings indicate that lateral inhomogeneities are absent from PSS brush layers collapsed in a poor solvent without multivalent ions. Together, AFM, SFA, and our molecular model present a detailed picture in which solvophobic and multivalent ion-induced effects work in concert to drive strong phase separation, with electrostatic bridging of polyelectrolyte chains playing an essential role in the collapsed structure formation.

| S-EPMC5722652 | biostudies-literature

Application of spherical polyelectrolyte brushes microparticle system in flocculation and retention.

Project description:In this paper, a microparticle system consisting of cationic polyacrylamide (CPAM) and anionic spherical polyelectrolyte brushes (ASPB) is proposed to improve the retention of pulp suspension containing bleached reed kraft pulp and precipitated calcium carbonate (PCC). We first describe the preparation of ASPB. The ASPB, consisting of a carbon sphere (CS) core and a shell of sodium polystyrene sulfonate (PSSNa) brushes, was synthesized by surface-initiated polymerization. The structure and morphology of ASPB were characterized by Fourier-transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Then, flocculation and retention of pulp suspension by a CPAM/ASPB dual-component system were examined. Our results indicate that more highly effective flocculation and higher retention efficiency could be achieved simultaneously by a CPAM/ASPB dual-component system when compared to the conventional microparticle system. Bridging flocculation and electrostatic attraction might be the main flocculation mechanism for CPAM/ASPB systems.

| S-EPMC7240434 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data