Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Power Conversion Efficiency of Perovskite Solar Cells with an Up-Conversion Material of Er3+-Yb3+-Li+ Tri-doped TiO2.

ABSTRACT: In this paper, Er3+-Yb3+-Li+ tri-doped TiO2 (UC-TiO2) was prepared by an addition of Li+ to Er3+-Yb3+ co-doped TiO2. The UC-TiO2 presented an enhanced up-conversion emission compared with Er3+-Yb3+ co-doped TiO2. The UC-TiO2 was applied to the perovskite solar cells. The power conversion efficiency (PCE) of the solar cells without UC-TiO2 was 14.0%, while the PCE of the solar cells with UC-TiO2 was increased to 16.5%, which presented an increase of 19%. The results suggested that UC-TiO2 is an effective up-conversion material. And this study provided a route to expand the spectral absorption of perovskite solar cells from visible light to near-infrared using up-conversion materials.

SUBMITTER: Zhang Z

PROVIDER: S-EPMC5948189 | biostudies-literature | 2018 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Enhanced Power Conversion Efficiency of Perovskite Solar Cells with an Up-Conversion Material of Er3+-Yb3+-Li+ Tri-doped TiO2.

Zhang Zhenlong Z Qin Jianqiang J Shi Wenjia W Liu Yanyan Y Zhang Yan Y Liu Yuefeng Y Gao Huiping H Mao Yanli Y

Nanoscale research letters 20180511 1

In this paper, Er3+-Yb3+-Li+ tri-doped TiO2 (UC-TiO2) was prepared by an addition of Li+ to Er3+-Yb3+ co-doped TiO2. The UC-TiO2 presented an enhanced up-conversion emission compared with Er3+-Yb3+ co-doped TiO2. The UC-TiO2 was applied to the perovskite solar cells. The power conversion efficiency (PCE) of the solar cells without UC-TiO2< ...[more]

PMID: 29752556

Similar Datasets

Synthesis of Cobalt-Doped TiO2 Based on Metal-Organic Frameworks as an Effective Electron Transport Material in Perovskite Solar Cells.

Project description:In this study, Co-doped TiO2 was prepared successfully using a solvothermal method with trimesic acid (H3BTC) as an organic framework to form the Co-doped Ti metal-organic framework (Co-doped Ti-MOF). By thermally decomposing the Co-doped Ti-MOF in air, the framework template was removed, and porous Co-doped TiO2 was obtained. The crystal structure of the material was analyzed using X-ray diffraction. The morphology was examined using scanning electron microscopy (SEM) and focused ion beam SEM. The large specific surface area was determined to be 135.95 m2 g-1 using Brunauer-Emmett-Teller theory. Fourier transform infrared spectroscopy verified the presence of Ti-O-Ti and Co-O vibrations in the as-prepared sample. Furthermore, the results of UV-vis spectroscopy showed that doping with Co remarkably improved the absorption ability of Ti-MOF toward the visible-light region with a band gap energy of 2.38 eV (λ = 502 nm). Steady-state photoluminescence and electrochemical impedance spectroscopy were conducted to illustrate the improvement of electron transfer in the doped material further. The optimum power conversion efficiency of solar cells using 1 wt % Co-doped TiO2 as an electron transport layer was found to be 15.75%, while that of solar cells using commercial dyesol TiO2 is only 14.42%.

| S-EPMC7016924 | biostudies-literature

Eu3+, Tb3+- and Er3+, Yb3+-Doped α-MoO3 Nanosheets for Optical Luminescent Thermometry.

Project description:Here we report a novel synthesis approach for the preparation of α-MoO3:Ln3+ materials employing a two-step synthesis. Additionally, in this work the α-MoO3:Ln3+ materials are reported as potential optical thermometers for the first time. In this synthesis approach, first MoS2 2D nanosheets were prepared, which were further heat treated to obtain α-MoO3. These materials were fully characterized by powder X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray fluorescence (XRF), thermogravimetry (TG) and differential thermal analysis (DTA), transmission electron microscopy (TEM), and luminescence spectroscopy. Temperature-dependent luminescence measurements were carried out to determine the optical thermometric properties of two different types of α-MoO3:Ln3+ materials (Eu3+/Tb3+ downshifting and Er3+/Yb3+ upconversion luminescence systems). We demonstrate in this study that this class of material could be a potential candidate for temperature-sensing applications.

| S-EPMC6524054 | biostudies-literature

Highly efficient up-conversion luminescence in Er3+/Yb3+ co-doped Na5Lu9F32 single crystals by vertical Bridgman method.

Project description:Er3+/Yb3+ co-doped Na5Lu9F32 single crystals with different concentrations of Yb3+ ions were prepared to investigate their phase structure, up-conversion (UC) properties and mechanism of UC luminescence by Bridgman method. Under 980 nm near-infrared (NIR) excitation, three sharp UC emission bands topping at green ~525 nm, ~548 nm and red ~669 nm were obtained in Er3+/Yb3+ doped Na5Lu9F32 single crystals which are attributing to the transitions of 2H11/2 → 4I15/2, 4S3/2 → 4I15/2 and 4F9/2 → 4I15/2, respectively. The quadratic dependence of pump power on UC emission indicated that two-photon process is in charge of the transition from excited state of Yb3+ ions to lower state of Er3+ ion in Na5Lu9F32 single crystals. The long-accepted mechanism for the production of red and green emissions through up-conversion (UC) under 980 nm excitation in Er3+/Yb3+ co-doped materials apply in the Na5Lu9F32 host was displayed. The enhancement of the red emission was observed due to a cross-relaxation (CR) process of the form: 4F7/2 + 4I11/2 → 4F9/2 + 4F9/2. Furthermore, an ideal yellowish green light performance could be achieved with 1.0 mol% Er3+ doped certain Yb3+ concentrations samples, and its external quantum efficiency approached to 6.80% under 5.5 Wcm-2 980 nm excitation which can be applied in developing UC displays for electro-optical devices.

| S-EPMC5562908 | biostudies-other

A New Up-conversion Material of Ho3+-Yb3+-Mg2+ Tri-doped TiO2 and Its Applications to Perovskite Solar Cells.

Project description:A new up-conversion nanomaterial of Ho3+-Yb3+-Mg2+ tri-doped TiO2 (UC-Mg-TiO2) was designed and synthesized with a sol-gel method. The UC-Mg-TiO2 presented enhanced up-conversion fluorescence by an addition of Mg2+. The UC-Mg-TiO2 was utilized to fabricate perovskite solar cells by forming a thin layer on the electron transfer layer. The results display that the power conversion efficiency of the solar cells based on the electron transfer layer with UC-Mg-TiO2 is improved to 16.3 from 15.2% for those without UC-Mg-TiO2. It is demonstrated that the synthesized UC-Mg-TiO2 can convert the near-infrared light to visible light that perovskite film can absorb to improve the power conversion efficiency of the devices.

| S-EPMC6119175 | biostudies-literature

Tantalum-Doped TiO2 Prepared by Atomic Layer Deposition and Its Application in Perovskite Solar Cells.

Project description:Tantalum (Ta)-doped titanium oxide (TiO2) thin films are grown by plasma enhanced atomic layer deposition (PEALD), and used as both an electron transport layer and hole blocking compact layer of perovskite solar cells. The metal precursors of tantalum ethoxide and titanium isopropoxide are simultaneously injected into the deposition chamber. The Ta content is controlled by the temperature of the metal precursors. The experimental results show that the Ta incorporation introduces oxygen vacancies defects, accompanied by the reduced crystallinity and optical band gap. The PEALD Ta-doped films show a resistivity three orders of magnitude lower than undoped TiO2, even at a low Ta content (0.8-0.95 at.%). The ultraviolet photoelectron spectroscopy spectra reveal that Ta incorporation leads to a down shift of valance band and conduction positions, and this is helpful for the applications involving band alignment engineering. Finally, the perovskite solar cell with Ta-doped TiO2 electron transport layer demonstrates significantly improved fill factor and conversion efficiency as compared to that with the undoped TiO2 layer.

| S-EPMC8226548 | biostudies-literature

Color-tunable up-conversion emission in Y2O3:Yb3+, Er3+ nanoparticles prepared by polymer complex solution method.

Project description:Powders of Y2O3 co-doped with Yb3+ and Er3+ composed of well-crystallized nanoparticles (30 to 50 nm in diameter) with no adsorbed ligand species on their surface are prepared by polymer complex solution method. These powders exhibit up-conversion emission upon 978-nm excitation with a color that can be tuned from green to red by changing the Yb3+/Er3+ concentration ratio. The mechanism underlying up-conversion color changes is presented along with material structural and optical properties. PACS: 42.70.-a, 78.55.Hx, 78.60.-b.

| S-EPMC3765681 | biostudies-literature

Up-Conversion Luminescence and Temperature Sensing of Er3+/Yb3+ Codoped Y2(1–x %)Lu2x %O3 Solid Solution

Project description:In this paper, Er3+/Yb3+ codoped

| S-EPMC9948156 | biostudies-literature

Lu3+/Yb3+ and Lu3+/Er3+ co-doped antimony selenide nanomaterials: synthesis, characterization, and electrical, thermoelectrical, and optical properties.

Project description:Lu3+/Yb3+ and Lu3+/Er3+ co-doped Sb2Se3 nanomaterials were synthesized by co-reduction method in hydrothermal condition. Powder X-ray diffraction patterns indicate that the LnxLn'xSb2-2xSe3 Ln: Lu3+/Yb3+ and Lu3+/Er3+ crystals (x = 0.00 - 0.04) are isostructural with Sb2Se3. The cell parameters were increased for compounds upon increasing the dopant content (x). Scanning electron microscopy and transmission electron microscopy images show that co-doping of Lu3+/Yb3+ ions in the lattice of Sb2Se3 produces nanorods, while that in Lu3+/Er3+ produces nanoparticles, respectively. The electrical conductivity of co-doped Sb2Se3 is higher than that of the pure Sb2Se3 and increases with temperature. By increasing the concentration of Ln3+ions, the absorption spectrum of Sb2Se3 shows red shifts and some intensity changes. In addition to the characteristic red emission peaks of Sb2Se3, emission spectra of co-doped materials show other emission bands originating from f-f transitions of the Yb3+ ions.

| S-EPMC3618067 | biostudies-literature

Multifunctional Eu3+- and Er3+/Yb3+-doped GdVO4 nanoparticles synthesized by reverse micelle method.

Project description:Synthesis of Eu(3+)- and Er(3+)/Yb(3+)-doped GdVO4 nanoparticles in reverse micelles and their multifunctional luminescence properties are presented. Using cyclohexane, Triton X-100, and n-pentanol as the oil, surfactant, and co-surfactant, respectively, crystalline nanoparticles with ~4 nm diameter are prepared at low temperatures. The particle size assessed using transmission electron microscopy is similar to the crystallite size obtained from X-ray diffraction measurements, suggesting that each particle comprises a single crystallite. Eu(3+)-doped GdVO4 nanoparticles emit red light through downconversion upon UV excitation. Er(3+)/Yb(3+)-doped GdVO4 nanoparticles exhibit several functions; apart from the downconversion of UV radiation into visible green light, they act as upconvertors, transforming near-infrared excitation (980 nm) into visible green light. The ratio of green emissions from (2)H11/2 → (2)I15/2 and (4)S3/2 → (4)I15/2 transitions is temperature dependent and can be used for nanoscale temperature sensing with near-infrared excitation. The relative sensor sensitivity is 1.11%K(-1), which is among the highest sensitivities recorded for upconversion-luminescence-based thermometers.

| S-EPMC3936229 | biostudies-other

Formation of Highly Efficient Perovskite Solar Cells by Applying Li-Doped CuSCN Hole Conductor and Interface Treatment.

Project description:Li-doped CuSCN films of various compositions were applied as hole-transporting material (HTM) for mesoscopic perovskite solar cells (PSCs). Those films of ~60 nm thickness, spin-coated on the perovskite layer, exhibit significantly higher crystallinity and hole mobility compared with the pristine CuSCN films. Among them, 0.33% Li-doped CuSCN (Li0.33:CuSCN) shows the best performance as the HTM of mesoscopic PSC. Furthermore, by depositing a slight amount of PCPDTBT over the Li0.33:CuSCN layer, the VOC was increased to 1.075 V, resulting in an average PCE of 20.24% and 20.65% for the champion device. These PCE and VOC values are comparable to those of PSC using spiro-OMETAD (PCE: 20.61%, VOC: 1.089 V). Such a remarkable increase can be attributed to the penetration of the PCPDTBT polymer into the grain boundaries of the Li0.33:CuSCN film, and to the interface with the perovskite layer, leading to the removal of defects on the perovskite surface by paving the non-contacting parts, as well as to the tight interconnection of the Li0.33:CuSCN grains. The PSC device with Li0.33:CuSCN showed a high long-term stability similar to that with bare CuSCN, and the introduction of PCPDTBT onto the perovskite/Li0.33:CuSCN further improved device stability, exhibiting 94% of the initial PCE after 100 days.

| S-EPMC9698157 | biostudies-literature